diff options
| -rwxr-xr-x | keyboards/contra/config.h | 58 | ||||
| -rwxr-xr-x | keyboards/contra/contra.c | 1 | ||||
| -rwxr-xr-x | keyboards/contra/contra.h | 18 | ||||
| -rw-r--r-- | keyboards/contra/keymaps/dana/config.h | 30 | ||||
| -rw-r--r-- | keyboards/contra/keymaps/dana/keymap.c | 37 | ||||
| -rw-r--r-- | keyboards/contra/keymaps/dana/readme.md | 6 | ||||
| -rw-r--r-- | keyboards/contra/keymaps/dana/rules.mk | 25 | ||||
| -rw-r--r-- | keyboards/contra/readme.md | 16 | ||||
| -rwxr-xr-x | keyboards/contra/rules.mk | 58 |
9 files changed, 249 insertions, 0 deletions
diff --git a/keyboards/contra/config.h b/keyboards/contra/config.h new file mode 100755 index 0000000000..85077ed46a --- /dev/null +++ b/keyboards/contra/config.h @@ -0,0 +1,58 @@ +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Cartel +#define PRODUCT Contra +#define DESCRIPTION Keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { F6, B3, B2, B6 } +#define MATRIX_COL_PINS { F4, F5, B5, B4, E6, D7, C6, D4, D0, D1, D2, D3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ + +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 0 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* prevent stuck modifiers */ +#define PREVENT_STUCK_MODIFIERS + + +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 0 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif + +#endif diff --git a/keyboards/contra/contra.c b/keyboards/contra/contra.c new file mode 100755 index 0000000000..3ef66a9c0d --- /dev/null +++ b/keyboards/contra/contra.c @@ -0,0 +1 @@ +#include "contra.h" diff --git a/keyboards/contra/contra.h b/keyboards/contra/contra.h new file mode 100755 index 0000000000..e9f9c5418d --- /dev/null +++ b/keyboards/contra/contra.h @@ -0,0 +1,18 @@ +#ifndef KB_H +#define KB_H + +#include "quantum.h" + +#define KEYMAP( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311 } \ +} + +#endif
\ No newline at end of file diff --git a/keyboards/contra/keymaps/dana/config.h b/keyboards/contra/keymaps/dana/config.h new file mode 100644 index 0000000000..2846b57910 --- /dev/null +++ b/keyboards/contra/keymaps/dana/config.h @@ -0,0 +1,30 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + + +#undef TAPPING_TERM +#define TAPPING_TERM 190 + +#define MUSIC_MASK (keycode != KC_NO) +#define MIDI_ADVANCED + +#endif diff --git a/keyboards/contra/keymaps/dana/keymap.c b/keyboards/contra/keymaps/dana/keymap.c new file mode 100644 index 0000000000..529491923f --- /dev/null +++ b/keyboards/contra/keymaps/dana/keymap.c @@ -0,0 +1,37 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "contra.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | ` | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Tab | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Shift | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | Cmd |Lower | Space |Raise | Enter| Cmd | Alt |Ctrl | + * `-----------------------------------------------------------------------------------' + */ +[0] = { + { MI_C_4, MI_Cs_4, MI_D_4, MI_Ds_4, MI_E_4, MI_F_4, MI_Fs_4, MI_G_4, MI_Gs_4, MI_A_4, MI_As_4, MI_B_4 }, + { MI_C_3, MI_Cs_3, MI_D_3, MI_Ds_3, MI_E_3, MI_F_3, MI_Fs_3, MI_G_3, MI_Gs_3, MI_A_3, MI_As_3, MI_B_3 }, + { MI_C_2, MI_Cs_2, MI_D_2, MI_Ds_2, MI_E_2, MI_F_2, MI_Fs_2, MI_G_2, MI_Gs_2, MI_A_2, MI_As_2, MI_B_2 }, + { MI_C_1, MI_Cs_1, MI_D_1, MI_Ds_1, MI_E_1, MI_F_1, MI_Fs_1, MI_G_1, MI_Gs_1, MI_A_1, MI_As_1, MI_B_1 } +} +}; + + + + diff --git a/keyboards/contra/keymaps/dana/readme.md b/keyboards/contra/keymaps/dana/readme.md new file mode 100644 index 0000000000..75b4582d4a --- /dev/null +++ b/keyboards/contra/keymaps/dana/readme.md @@ -0,0 +1,6 @@ +# Dana musical MIDI keyboard layout + +Has the contra mapped as a MIDI keyboard, where each row is an octave. + +The keyboard has only MIDI, nothing else! + diff --git a/keyboards/contra/keymaps/dana/rules.mk b/keyboards/contra/keymaps/dana/rules.mk new file mode 100644 index 0000000000..1198f378a8 --- /dev/null +++ b/keyboards/contra/keymaps/dana/rules.mk @@ -0,0 +1,25 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = yes # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/contra/readme.md b/keyboards/contra/readme.md new file mode 100644 index 0000000000..a83228507d --- /dev/null +++ b/keyboards/contra/readme.md @@ -0,0 +1,16 @@ +CONTRA +=== + + + +A 40% keyboard by + +Keyboard Maintainer: The QMK Community +Hardware Supported: CONTRA +Hardware Availability: [CARTEL](https://cartel.ltd/projects/contra/) + +Make example for this keyboard (after setting up your build environment): + + make contra:dana + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/contra/rules.mk b/keyboards/contra/rules.mk new file mode 100755 index 0000000000..ca2945e63b --- /dev/null +++ b/keyboards/contra/rules.mk @@ -0,0 +1,58 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE = no # MIDI controls +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 |