diff options
18 files changed, 2854 insertions, 2 deletions
diff --git a/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.c b/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.c new file mode 100644 index 0000000000..8e0303523a --- /dev/null +++ b/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.c @@ -0,0 +1,263 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + http://www.apache.org/licenses/LICENSE-2.0 + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * This file has been automatically generated using ChibiStudio board + * generator plugin. Do not edit manually. + */ + +#include "hal.h" +#include "stm32_gpio.h" + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver exported variables. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver local variables and types. */ +/*===========================================================================*/ + +/** + * @brief Type of STM32 GPIO port setup. + */ +typedef struct { + uint32_t moder; + uint32_t otyper; + uint32_t ospeedr; + uint32_t pupdr; + uint32_t odr; + uint32_t afrl; + uint32_t afrh; +} gpio_setup_t; + +/** + * @brief Type of STM32 GPIO initialization data. + */ +typedef struct { +#if STM32_HAS_GPIOA || defined(__DOXYGEN__) + gpio_setup_t PAData; +#endif +#if STM32_HAS_GPIOB || defined(__DOXYGEN__) + gpio_setup_t PBData; +#endif +#if STM32_HAS_GPIOC || defined(__DOXYGEN__) + gpio_setup_t PCData; +#endif +#if STM32_HAS_GPIOD || defined(__DOXYGEN__) + gpio_setup_t PDData; +#endif +#if STM32_HAS_GPIOE || defined(__DOXYGEN__) + gpio_setup_t PEData; +#endif +#if STM32_HAS_GPIOF || defined(__DOXYGEN__) + gpio_setup_t PFData; +#endif +#if STM32_HAS_GPIOG || defined(__DOXYGEN__) + gpio_setup_t PGData; +#endif +#if STM32_HAS_GPIOH || defined(__DOXYGEN__) + gpio_setup_t PHData; +#endif +#if STM32_HAS_GPIOI || defined(__DOXYGEN__) + gpio_setup_t PIData; +#endif +#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) + gpio_setup_t PJData; +#endif +#if STM32_HAS_GPIOK || defined(__DOXYGEN__) + gpio_setup_t PKData; +#endif +} gpio_config_t; + +/** + * @brief STM32 GPIO static initialization data. + */ +static const gpio_config_t gpio_default_config = { +#if STM32_HAS_GPIOA + {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, + VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, +#endif +#if STM32_HAS_GPIOB + {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, + VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, +#endif +#if STM32_HAS_GPIOC + {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, + VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, +#endif +#if STM32_HAS_GPIOD + {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, + VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, +#endif +#if STM32_HAS_GPIOE + {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, + VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, +#endif +#if STM32_HAS_GPIOF + {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, + VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, +#endif +#if STM32_HAS_GPIOG + {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, + VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, +#endif +#if STM32_HAS_GPIOH + {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, + VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, +#endif +#if STM32_HAS_GPIOI + {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, + VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, +#endif +#if STM32_HAS_GPIOJ + {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, + VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, +#endif +#if STM32_HAS_GPIOK + {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, + VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} +#endif +}; + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { + + gpiop->OTYPER = config->otyper; + gpiop->OSPEEDR = config->ospeedr; + gpiop->PUPDR = config->pupdr; + gpiop->ODR = config->odr; + gpiop->AFRL = config->afrl; + gpiop->AFRH = config->afrh; + gpiop->MODER = config->moder; +} + +static void stm32_gpio_init(void) { + + /* Enabling GPIO-related clocks, the mask comes from the + registry header file.*/ + rccResetAHB(STM32_GPIO_EN_MASK); + rccEnableAHB(STM32_GPIO_EN_MASK, true); + + /* Initializing all the defined GPIO ports.*/ +#if STM32_HAS_GPIOA + gpio_init(GPIOA, &gpio_default_config.PAData); +#endif +#if STM32_HAS_GPIOB + gpio_init(GPIOB, &gpio_default_config.PBData); +#endif +#if STM32_HAS_GPIOC + gpio_init(GPIOC, &gpio_default_config.PCData); +#endif +#if STM32_HAS_GPIOD + gpio_init(GPIOD, &gpio_default_config.PDData); +#endif +#if STM32_HAS_GPIOE + gpio_init(GPIOE, &gpio_default_config.PEData); +#endif +#if STM32_HAS_GPIOF + gpio_init(GPIOF, &gpio_default_config.PFData); +#endif +#if STM32_HAS_GPIOG + gpio_init(GPIOG, &gpio_default_config.PGData); +#endif +#if STM32_HAS_GPIOH + gpio_init(GPIOH, &gpio_default_config.PHData); +#endif +#if STM32_HAS_GPIOI + gpio_init(GPIOI, &gpio_default_config.PIData); +#endif +#if STM32_HAS_GPIOJ + gpio_init(GPIOJ, &gpio_default_config.PJData); +#endif +#if STM32_HAS_GPIOK + gpio_init(GPIOK, &gpio_default_config.PKData); +#endif +} + +/*===========================================================================*/ +/* Driver interrupt handlers. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +/** + * @brief Early initialization code. + * @details GPIO ports and system clocks are initialized before everything + * else. + */ +void __early_init(void) { + + stm32_gpio_init(); + stm32_clock_init(); +} + +#if HAL_USE_SDC || defined(__DOXYGEN__) +/** + * @brief SDC card detection. + */ +bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { + + (void)sdcp; + /* TODO: Fill the implementation.*/ + return true; +} + +/** + * @brief SDC card write protection detection. + */ +bool sdc_lld_is_write_protected(SDCDriver *sdcp) { + + (void)sdcp; + /* TODO: Fill the implementation.*/ + return false; +} +#endif /* HAL_USE_SDC */ + +#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) +/** + * @brief MMC_SPI card detection. + */ +bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { + + (void)mmcp; + /* TODO: Fill the implementation.*/ + return true; +} + +/** + * @brief MMC_SPI card write protection detection. + */ +bool mmc_lld_is_write_protected(MMCDriver *mmcp) { + + (void)mmcp; + /* TODO: Fill the implementation.*/ + return false; +} +#endif + +/** + * @brief Board-specific initialization code. + * @todo Add your board-specific code, if any. + */ +void boardInit(void) { + +} diff --git a/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.h b/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.h new file mode 100644 index 0000000000..3c4f3f2e82 --- /dev/null +++ b/keyboards/akegata_denki/device_one/boards/DEVICE_ONE/board.h @@ -0,0 +1,950 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + http://www.apache.org/licenses/LICENSE-2.0 + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * This file has been automatically generated using ChibiStudio board + * generator plugin. Do not edit manually. + */ + +#ifndef BOARD_H +#define BOARD_H + +/*===========================================================================*/ +/* Driver constants. */ +/*===========================================================================*/ + +/* + * Setup for STMicroelectronics STM32 Nucleo32-F042K6 board. + */ + +/* + * Board identifier. + */ +#define BOARD_ST_NUCLEO32_F042K6 +#define BOARD_NAME "STMicroelectronics STM32 Nucleo32-F042K6" + +/* + * Board oscillators-related settings. + * NOTE: LSE not fitted. + * NOTE: HSE not fitted. + */ +#if !defined(STM32_LSECLK) +#define STM32_LSECLK 0U +#endif + +#define STM32_LSEDRV (3U << 3U) + +#if !defined(STM32_HSECLK) +#define STM32_HSECLK 0U +#endif + +/* + * MCU type as defined in the ST header. + */ +#define STM32F042x6 + +/* + * IO pins assignments. + */ +#define GPIOA_ARD_A0 0U +#define GPIOA_ARD_A1 1U +#define GPIOA_VCP_TX 2U +#define GPIOA_ARD_A2 3U +#define GPIOA_ARD_A3 4U +#define GPIOA_ARD_A4 5U +#define GPIOA_ARD_A5 6U +#define GPIOA_ARD_A6 7U +#define GPIOA_ARD_D9 8U +#define GPIOA_ARD_D1 9U +#define GPIOA_ARD_D0 10U +#define GPIOA_ARD_D10 11U +#define GPIOA_ARD_D2 12U +#define GPIOA_SWDIO 13U +#define GPIOA_SWCLK 14U +#define GPIOA_VCP_RX 15U + +#define GPIOB_ARD_D3 0U +#define GPIOB_ARD_D6 1U +#define GPIOB_PIN2 2U +#define GPIOB_ARD_D13 3U +#define GPIOB_LED_GREEN 3U +#define GPIOB_ARD_D12 4U +#define GPIOB_ARD_D11 5U +#define GPIOB_ARD_D5 6U +#define GPIOB_ARD_A5_ALT 6U +#define GPIOB_ARD_D4 7U +#define GPIOB_ARD_A4_ALT 7U +#define GPIOB_PIN8 8U +#define GPIOB_PIN9 9U +#define GPIOB_PIN10 10U +#define GPIOB_PIN11 11U +#define GPIOB_PIN12 12U +#define GPIOB_PIN13 13U +#define GPIOB_PIN14 14U +#define GPIOB_PIN15 15U + +#define GPIOC_PIN0 0U +#define GPIOC_PIN1 1U +#define GPIOC_PIN2 2U +#define GPIOC_PIN3 3U +#define GPIOC_PIN4 4U +#define GPIOC_PIN5 5U +#define GPIOC_PIN6 6U +#define GPIOC_PIN7 7U +#define GPIOC_PIN8 8U +#define GPIOC_PIN9 9U +#define GPIOC_PIN10 10U +#define GPIOC_PIN11 11U +#define GPIOC_PIN12 12U +#define GPIOC_PIN13 13U +#define GPIOC_PIN14 14U +#define GPIOC_PIN15 15U + +#define GPIOD_PIN0 0U +#define GPIOD_PIN1 1U +#define GPIOD_PIN2 2U +#define GPIOD_PIN3 3U +#define GPIOD_PIN4 4U +#define GPIOD_PIN5 5U +#define GPIOD_PIN6 6U +#define GPIOD_PIN7 7U +#define GPIOD_PIN8 8U +#define GPIOD_PIN9 9U +#define GPIOD_PIN10 10U +#define GPIOD_PIN11 11U +#define GPIOD_PIN12 12U +#define GPIOD_PIN13 13U +#define GPIOD_PIN14 14U +#define GPIOD_PIN15 15U + +#define GPIOE_PIN0 0U +#define GPIOE_PIN1 1U +#define GPIOE_PIN2 2U +#define GPIOE_PIN3 3U +#define GPIOE_PIN4 4U +#define GPIOE_PIN5 5U +#define GPIOE_PIN6 6U +#define GPIOE_PIN7 7U +#define GPIOE_PIN8 8U +#define GPIOE_PIN9 9U +#define GPIOE_PIN10 10U +#define GPIOE_PIN11 11U +#define GPIOE_PIN12 12U +#define GPIOE_PIN13 13U +#define GPIOE_PIN14 14U +#define GPIOE_PIN15 15U + +#define GPIOF_ARD_D7 0U +#define GPIOF_ARD_D8 1U +#define GPIOF_PIN2 2U +#define GPIOF_PIN3 3U +#define GPIOF_PIN4 4U +#define GPIOF_PIN5 5U +#define GPIOF_PIN6 6U +#define GPIOF_PIN7 7U +#define GPIOF_PIN8 8U +#define GPIOF_PIN9 9U +#define GPIOF_PIN10 10U +#define GPIOF_PIN11 11U +#define GPIOF_PIN12 12U +#define GPIOF_PIN13 13U +#define GPIOF_PIN14 14U +#define GPIOF_PIN15 15U + +/* + * IO lines assignments. + */ +#define LINE_ARD_A0 PAL_LINE(GPIOA, 0U) +#define LINE_ARD_A1 PAL_LINE(GPIOA, 1U) +#define LINE_VCP_TX PAL_LINE(GPIOA, 2U) +#define LINE_ARD_A2 PAL_LINE(GPIOA, 3U) +#define LINE_ARD_A3 PAL_LINE(GPIOA, 4U) +#define LINE_ARD_A4 PAL_LINE(GPIOA, 5U) +#define LINE_ARD_A5 PAL_LINE(GPIOA, 6U) +#define LINE_ARD_A6 PAL_LINE(GPIOA, 7U) +#define LINE_ARD_D9 PAL_LINE(GPIOA, 8U) +#define LINE_ARD_D1 PAL_LINE(GPIOA, 9U) +#define LINE_ARD_D0 PAL_LINE(GPIOA, 10U) +#define LINE_ARD_D10 PAL_LINE(GPIOA, 11U) +#define LINE_ARD_D2 PAL_LINE(GPIOA, 12U) +#define LINE_SWDIO PAL_LINE(GPIOA, 13U) +#define LINE_SWCLK PAL_LINE(GPIOA, 14U) +#define LINE_VCP_RX PAL_LINE(GPIOA, 15U) +#define LINE_ARD_D3 PAL_LINE(GPIOB, 0U) +#define LINE_ARD_D6 PAL_LINE(GPIOB, 1U) +#define LINE_ARD_D13 PAL_LINE(GPIOB, 3U) +#define LINE_LED_GREEN PAL_LINE(GPIOB, 3U) +#define LINE_ARD_D12 PAL_LINE(GPIOB, 4U) +#define LINE_ARD_D11 PAL_LINE(GPIOB, 5U) +#define LINE_ARD_D5 PAL_LINE(GPIOB, 6U) +#define LINE_ARD_A5_ALT PAL_LINE(GPIOB, 6U) +#define LINE_ARD_D4 PAL_LINE(GPIOB, 7U) +#define LINE_ARD_A4_ALT PAL_LINE(GPIOB, 7U) +#define LINE_ARD_D7 PAL_LINE(GPIOF, 0U) +#define LINE_ARD_D8 PAL_LINE(GPIOF, 1U) + +/*===========================================================================*/ +/* Driver pre-compile time settings. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver data structures and types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver macros. */ +/*===========================================================================*/ + +/* + * I/O ports initial setup, this configuration is established soon after reset + * in the initialization code. + * Please refer to the STM32 Reference Manual for details. + */ +#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) +#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) +#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) +#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) +#define PIN_ODR_LOW(n) (0U << (n)) +#define PIN_ODR_HIGH(n) (1U << (n)) +#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) +#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) +#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) +#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) +#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) +#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) +#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) +#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) +#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) +#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) + +/* + * GPIOA setup: + * + * PA0 - ARD_A0 (input pullup). + * PA1 - ARD_A1 (input pullup). + * PA2 - VCP_TX (alternate 1). + * PA3 - ARD_A2 (input pullup). + * PA4 - ARD_A3 (input pullup). + * PA5 - ARD_A4 (input pullup). + * PA6 - ARD_A5 (input pullup). + * PA7 - ARD_A6 (input pullup). + * PA8 - ARD_D9 (input pullup). + * PA9 - ARD_D1 (input pullup). + * PA10 - ARD_D0 (input pullup). + * PA11 - ARD_D10 (input pullup). + * PA12 - ARD_D2 (input pullup). + * PA13 - SWDIO (alternate 0). + * PA14 - SWCLK (alternate 0). + * PA15 - VCP_RX (alternate 1). + */ +#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_ARD_A0) | \ + PIN_MODE_INPUT(GPIOA_ARD_A1) | \ + PIN_MODE_ALTERNATE(GPIOA_VCP_TX) | \ + PIN_MODE_INPUT(GPIOA_ARD_A2) | \ + PIN_MODE_INPUT(GPIOA_ARD_A3) | \ + PIN_MODE_INPUT(GPIOA_ARD_A4) | \ + PIN_MODE_INPUT(GPIOA_ARD_A5) | \ + PIN_MODE_INPUT(GPIOA_ARD_A6) | \ + PIN_MODE_INPUT(GPIOA_ARD_D9) | \ + PIN_MODE_INPUT(GPIOA_ARD_D1) | \ + PIN_MODE_INPUT(GPIOA_ARD_D0) | \ + PIN_MODE_INPUT(GPIOA_ARD_D10) | \ + PIN_MODE_INPUT(GPIOA_ARD_D2) | \ + PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ + PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ + PIN_MODE_ALTERNATE(GPIOA_VCP_RX)) +#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_ARD_A0) | \ + PIN_OTYPE_PUSHPULL(GPIOA_ARD_A1) | \ + PIN_OTYPE_PUSHPULL(GPIOA_VCP_TX) | \ + PIN_OTYPE_PUSHPULL(GPIOA_ARD_A2) | \ + PIN_OTYPE_PUSHPULL(GPIOA_ARD_A3) | \ + PIN_OTYPE_PUSHPULL(GPIOA_ARD_A4) | \ + PIN_OTYPE_PUSHPULL(GPIOA_ARD_A5) | \ + PIN_OTYPE_PUSHPULL(GPIOA_ARD_A6) | \ + PIN_OTYPE_PUSHPULL(GPIOA_ARD_D9) | \ + PIN_OTYPE_PUSHPULL(GPIOA_ARD_D1) | \ + PIN_OTYPE_PUSHPULL(GPIOA_ARD_D0) | \ + PIN_OTYPE_PUSHPULL(GPIOA_ARD_D10) | \ + PIN_OTYPE_PUSHPULL(GPIOA_ARD_D2) | \ + PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \ + PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ + PIN_OTYPE_PUSHPULL(GPIOA_VCP_RX)) +#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_HIGH(GPIOA_ARD_A0) | \ + PIN_OSPEED_HIGH(GPIOA_ARD_A1) | \ + PIN_OSPEED_LOW(GPIOA_VCP_TX) | \ + PIN_OSPEED_LOW(GPIOA_ARD_A2) | \ + PIN_OSPEED_HIGH(GPIOA_ARD_A3) | \ + PIN_OSPEED_LOW(GPIOA_ARD_A4) | \ + PIN_OSPEED_HIGH(GPIOA_ARD_A5) | \ + PIN_OSPEED_HIGH(GPIOA_ARD_A6) | \ + PIN_OSPEED_HIGH(GPIOA_ARD_D9) | \ + PIN_OSPEED_HIGH(GPIOA_ARD_D1) | \ + PIN_OSPEED_HIGH(GPIOA_ARD_D0) | \ + PIN_OSPEED_HIGH(GPIOA_ARD_D10) | \ + PIN_OSPEED_HIGH(GPIOA_ARD_D2) | \ + PIN_OSPEED_HIGH(GPIOA_SWDIO) | \ + PIN_OSPEED_HIGH(GPIOA_SWCLK) | \ + PIN_OSPEED_HIGH(GPIOA_VCP_RX)) +#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_ARD_A0) | \ + PIN_PUPDR_PULLUP(GPIOA_ARD_A1) | \ + PIN_PUPDR_FLOATING(GPIOA_VCP_TX) | \ + PIN_PUPDR_PULLUP(GPIOA_ARD_A2) | \ + PIN_PUPDR_PULLUP(GPIOA_ARD_A3) | \ + PIN_PUPDR_PULLUP(GPIOA_ARD_A4) | \ + PIN_PUPDR_PULLUP(GPIOA_ARD_A5) | \ + PIN_PUPDR_PULLUP(GPIOA_ARD_A6) | \ + PIN_PUPDR_PULLUP(GPIOA_ARD_D9) | \ + PIN_PUPDR_PULLUP(GPIOA_ARD_D1) | \ + PIN_PUPDR_PULLUP(GPIOA_ARD_D0) | \ + PIN_PUPDR_PULLUP(GPIOA_ARD_D10) | \ + PIN_PUPDR_PULLUP(GPIOA_ARD_D2) | \ + PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \ + PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \ + PIN_PUPDR_FLOATING(GPIOA_VCP_RX)) +#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_ARD_A0) | \ + PIN_ODR_HIGH(GPIOA_ARD_A1) | \ + PIN_ODR_HIGH(GPIOA_VCP_TX) | \ + PIN_ODR_HIGH(GPIOA_ARD_A2) | \ + PIN_ODR_HIGH(GPIOA_ARD_A3) | \ + PIN_ODR_LOW(GPIOA_ARD_A4) | \ + PIN_ODR_HIGH(GPIOA_ARD_A5) | \ + PIN_ODR_HIGH(GPIOA_ARD_A6) | \ + PIN_ODR_HIGH(GPIOA_ARD_D9) | \ + PIN_ODR_HIGH(GPIOA_ARD_D1) | \ + PIN_ODR_HIGH(GPIOA_ARD_D0) | \ + PIN_ODR_HIGH(GPIOA_ARD_D10) | \ + PIN_ODR_HIGH(GPIOA_ARD_D2) | \ + PIN_ODR_HIGH(GPIOA_SWDIO) | \ + PIN_ODR_HIGH(GPIOA_SWCLK) | \ + PIN_ODR_HIGH(GPIOA_VCP_RX)) +#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_ARD_A0, 0U) | \ + PIN_AFIO_AF(GPIOA_ARD_A1, 0U) | \ + PIN_AFIO_AF(GPIOA_VCP_TX, 1U) | \ + PIN_AFIO_AF(GPIOA_ARD_A2, 0U) | \ + PIN_AFIO_AF(GPIOA_ARD_A3, 0U) | \ + PIN_AFIO_AF(GPIOA_ARD_A4, 0U) | \ + PIN_AFIO_AF(GPIOA_ARD_A5, 0U) | \ + PIN_AFIO_AF(GPIOA_ARD_A6, 0U)) +#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_ARD_D9, 0U) | \ + PIN_AFIO_AF(GPIOA_ARD_D1, 0U) | \ + PIN_AFIO_AF(GPIOA_ARD_D0, 0U) | \ + PIN_AFIO_AF(GPIOA_ARD_D10, 0U) | \ + PIN_AFIO_AF(GPIOA_ARD_D2, 0U) | \ + PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \ + PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \ + PIN_AFIO_AF(GPIOA_VCP_RX, 1U)) + +/* + * GPIOB setup: + * + * PB0 - ARD_D3 (input pullup). + * PB1 - ARD_D6 (input pullup). + * PB2 - PIN2 (input pullup). + * PB3 - ARD_D13 LED_GREEN (output pushpull maximum). + * PB4 - ARD_D12 (input pullup). + * PB5 - ARD_D11 (input pullup). + * PB6 - ARD_D5 ARD_A5_ALT (input pullup). + * PB7 - ARD_D4 ARD_A4_ALT (input pullup). + * PB8 - PIN8 (input pullup). + * PB9 - PIN9 (input pullup). + * PB10 - PIN10 (input pullup). + * PB11 - PIN11 (input pullup). + * PB12 - PIN12 (input pullup). + * PB13 - PIN13 (input pullup). + * PB14 - PIN14 (input pullup). + * PB15 - PIN15 (input pullup). + */ +#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_ARD_D3) | \ + PIN_MODE_INPUT(GPIOB_ARD_D6) | \ + PIN_MODE_INPUT(GPIOB_PIN2) | \ + PIN_MODE_OUTPUT(GPIOB_ARD_D13) | \ + PIN_MODE_INPUT(GPIOB_ARD_D12) | \ + PIN_MODE_INPUT(GPIOB_ARD_D11) | \ + PIN_MODE_INPUT(GPIOB_ARD_D5) | \ + PIN_MODE_INPUT(GPIOB_ARD_D4) | \ + PIN_MODE_INPUT(GPIOB_PIN8) | \ + PIN_MODE_INPUT(GPIOB_PIN9) | \ + PIN_MODE_INPUT(GPIOB_PIN10) | \ + PIN_MODE_INPUT(GPIOB_PIN11) | \ + PIN_MODE_INPUT(GPIOB_PIN12) | \ + PIN_MODE_INPUT(GPIOB_PIN13) | \ + PIN_MODE_INPUT(GPIOB_PIN14) | \ + PIN_MODE_INPUT(GPIOB_PIN15)) +#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_ARD_D3) | \ + PIN_OTYPE_PUSHPULL(GPIOB_ARD_D6) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOB_ARD_D13) | \ + PIN_OTYPE_PUSHPULL(GPIOB_ARD_D12) | \ + PIN_OTYPE_PUSHPULL(GPIOB_ARD_D11) | \ + PIN_OTYPE_PUSHPULL(GPIOB_ARD_D5) | \ + PIN_OTYPE_PUSHPULL(GPIOB_ARD_D4) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) +#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_HIGH(GPIOB_ARD_D3) | \ + PIN_OSPEED_HIGH(GPIOB_ARD_D6) | \ + PIN_OSPEED_HIGH(GPIOB_PIN2) | \ + PIN_OSPEED_HIGH(GPIOB_ARD_D13) | \ + PIN_OSPEED_HIGH(GPIOB_ARD_D12) | \ + PIN_OSPEED_HIGH(GPIOB_ARD_D11) | \ + PIN_OSPEED_HIGH(GPIOB_ARD_D5) | \ + PIN_OSPEED_HIGH(GPIOB_ARD_D4) | \ + PIN_OSPEED_HIGH(GPIOB_PIN8) | \ + PIN_OSPEED_HIGH(GPIOB_PIN9) | \ + PIN_OSPEED_HIGH(GPIOB_PIN10) | \ + PIN_OSPEED_HIGH(GPIOB_PIN11) | \ + PIN_OSPEED_HIGH(GPIOB_PIN12) | \ + PIN_OSPEED_HIGH(GPIOB_PIN13) | \ + PIN_OSPEED_HIGH(GPIOB_PIN14) | \ + PIN_OSPEED_HIGH(GPIOB_PIN15)) +#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_ARD_D3) | \ + PIN_PUPDR_PULLUP(GPIOB_ARD_D6) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ + PIN_PUPDR_FLOATING(GPIOB_ARD_D13) | \ + PIN_PUPDR_PULLUP(GPIOB_ARD_D12) | \ + PIN_PUPDR_PULLUP(GPIOB_ARD_D11) | \ + PIN_PUPDR_PULLUP(GPIOB_ARD_D5) | \ + PIN_PUPDR_PULLUP(GPIOB_ARD_D4) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN15)) +#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_ARD_D3) | \ + PIN_ODR_HIGH(GPIOB_ARD_D6) | \ + PIN_ODR_HIGH(GPIOB_PIN2) | \ + PIN_ODR_LOW(GPIOB_ARD_D13) | \ + PIN_ODR_HIGH(GPIOB_ARD_D12) | \ + PIN_ODR_HIGH(GPIOB_ARD_D11) | \ + PIN_ODR_HIGH(GPIOB_ARD_D5) | \ + PIN_ODR_HIGH(GPIOB_ARD_D4) | \ + PIN_ODR_HIGH(GPIOB_PIN8) | \ + PIN_ODR_HIGH(GPIOB_PIN9) | \ + PIN_ODR_HIGH(GPIOB_PIN10) | \ + PIN_ODR_HIGH(GPIOB_PIN11) | \ + PIN_ODR_HIGH(GPIOB_PIN12) | \ + PIN_ODR_HIGH(GPIOB_PIN13) | \ + PIN_ODR_HIGH(GPIOB_PIN14) | \ + PIN_ODR_HIGH(GPIOB_PIN15)) +#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_ARD_D3, 0U) | \ + PIN_AFIO_AF(GPIOB_ARD_D6, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOB_ARD_D13, 0U) | \ + PIN_AFIO_AF(GPIOB_ARD_D12, 0U) | \ + PIN_AFIO_AF(GPIOB_ARD_D11, 0U) | \ + PIN_AFIO_AF(GPIOB_ARD_D5, 0U) | \ + PIN_AFIO_AF(GPIOB_ARD_D4, 0U)) +#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN15, 0U)) + +/ |