diff options
-rw-r--r-- | keyboards/ergodox/ez/ez.c | 10 | ||||
-rw-r--r-- | keyboards/ergodox/ez/matrix.c | 2 | ||||
-rw-r--r-- | keyboards/ergodox/keymaps/jack/Makefile | 1 | ||||
-rw-r--r-- | keyboards/ergodox/keymaps/jack/config.h | 4 | ||||
-rwxr-xr-x | quantum/light_ws2812.c | 21 | ||||
-rwxr-xr-x | quantum/light_ws2812.h | 14 | ||||
-rw-r--r-- | quantum/quantum.c | 1 | ||||
-rw-r--r-- | quantum/rgblight.c | 101 | ||||
-rw-r--r-- | quantum/rgblight.h | 10 | ||||
-rw-r--r-- | tmk_core/protocol/lufa/lufa.c | 33 |
10 files changed, 125 insertions, 72 deletions
diff --git a/keyboards/ergodox/ez/ez.c b/keyboards/ergodox/ez/ez.c index ddb8ff0cf7..039e4c6bb1 100644 --- a/keyboards/ergodox/ez/ez.c +++ b/keyboards/ergodox/ez/ez.c @@ -16,10 +16,10 @@ void matrix_init_kb(void) { // unused pins - C7, D4, D5, D7, E6 // set as input with internal pull-ip enabled DDRC &= ~(1<<7); - DDRD &= ~(1<<7 | 1<<5 | 1<<4); + DDRD &= ~(1<<5 | 1<<4); DDRE &= ~(1<<6); PORTC |= (1<<7); - PORTD |= (1<<7 | 1<<5 | 1<<4); + PORTD |= (1<<5 | 1<<4); PORTE |= (1<<6); ergodox_blink_all_leds(); @@ -51,6 +51,10 @@ uint8_t init_mcp23018(void) { mcp23018_status = 0x20; // I2C subsystem + + uint8_t sreg_prev; + sreg_prev=SREG; + cli(); if (i2c_initialized == 0) { i2c_init(); // on pins D(1,0) i2c_initialized++; @@ -79,6 +83,8 @@ uint8_t init_mcp23018(void) { out: i2c_stop(); + SREG=sreg_prev; + return mcp23018_status; } diff --git a/keyboards/ergodox/ez/matrix.c b/keyboards/ergodox/ez/matrix.c index a19bab90b2..43f5152591 100644 --- a/keyboards/ergodox/ez/matrix.c +++ b/keyboards/ergodox/ez/matrix.c @@ -121,7 +121,7 @@ void matrix_init(void) matrix_scan_count = 0; #endif - matrix_init_kb(); + matrix_init_quantum(); } diff --git a/keyboards/ergodox/keymaps/jack/Makefile b/keyboards/ergodox/keymaps/jack/Makefile index 1e57612788..7c257af501 100644 --- a/keyboards/ergodox/keymaps/jack/Makefile +++ b/keyboards/ergodox/keymaps/jack/Makefile @@ -1,4 +1,5 @@ RGBLIGHT_ENABLE = yes +MIDI_ENABLE = yes ifndef QUANTUM_DIR include ../../../../Makefile diff --git a/keyboards/ergodox/keymaps/jack/config.h b/keyboards/ergodox/keymaps/jack/config.h index 1781563b84..5bf109c184 100644 --- a/keyboards/ergodox/keymaps/jack/config.h +++ b/keyboards/ergodox/keymaps/jack/config.h @@ -5,10 +5,12 @@ /* ws2812 RGB LED */ #define RGB_DI_PIN D7 -// #define RGBLIGHT_TIMER +#define RGBLIGHT_TIMER #define RGBLED_NUM 15 // Number of LEDs #define RGBLIGHT_HUE_STEP 12 #define RGBLIGHT_SAT_STEP 255 #define RGBLIGHT_VAL_STEP 12 +#define RGB_MIDI + #endif
\ No newline at end of file diff --git a/quantum/light_ws2812.c b/quantum/light_ws2812.c index 497543339b..6edbc0f2bd 100755 --- a/quantum/light_ws2812.c +++ b/quantum/light_ws2812.c @@ -133,13 +133,13 @@ unsigned char I2C_Write(unsigned char c) #endif // Setleds for standard RGB -void inline ws2812_setleds(struct cRGB *ledarray, uint16_t leds) +void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) { // ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin)); ws2812_setleds_pin(ledarray,leds, _BV(RGB_DI_PIN & 0xF)); } -void inline ws2812_setleds_pin(struct cRGB *ledarray, uint16_t leds, uint8_t pinmask) +void inline ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask) { // ws2812_DDRREG |= pinmask; // Enable DDR // new universal format (DDR) @@ -150,12 +150,15 @@ void inline ws2812_setleds_pin(struct cRGB *ledarray, uint16_t leds, uint8_t pin } // Setleds for SK6812RGBW -void inline ws2812_setleds_rgbw(struct cRGBW *ledarray, uint16_t leds) +void inline ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t leds) { #ifdef RGBW_BB_TWI + uint8_t sreg_prev, twcr_prev; + sreg_prev=SREG; + twcr_prev=TWCR; cli(); - TWCR = 0; + TWCR &= ~(1<<TWEN); I2C_Init(); I2C_Start(); I2C_Write(0x84); @@ -167,9 +170,9 @@ void inline ws2812_setleds_rgbw(struct cRGBW *ledarray, uint16_t leds) I2C_Write(curbyte); } I2C_Stop(); - sei(); - #else - _delay_us(80); + SREG=sreg_prev; + // TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN); + TWCR=twcr_prev; #endif @@ -180,7 +183,9 @@ void inline ws2812_setleds_rgbw(struct cRGBW *ledarray, uint16_t leds) ws2812_sendarray_mask((uint8_t*)ledarray,leds<<2,_BV(RGB_DI_PIN & 0xF)); - + #ifndef RGBW_BB_TWI + _delay_us(80); + #endif } void ws2812_sendarray(uint8_t *data,uint16_t datlen) diff --git a/quantum/light_ws2812.h b/quantum/light_ws2812.h index 576c3bc483..0bef93d5ec 100755 --- a/quantum/light_ws2812.h +++ b/quantum/light_ws2812.h @@ -23,6 +23,14 @@ #define LIGHT_I2C_ADDR_WRITE ( (LIGHT_I2C_ADDR<<1) | I2C_WRITE ) #define LIGHT_I2C_ADDR_READ ( (LIGHT_I2C_ADDR<<1) | I2C_READ ) +#define RGBW 1 + +#ifdef RGBW + #define LED_TYPE struct cRGBW +#else + #define LED_TYPE struct cRGB +#endif + /* * Structure of the LED array @@ -49,9 +57,9 @@ struct cRGBW { uint8_t g; uint8_t r; uint8_t b; uint8_t w;}; * - Wait 50�s to reset the LEDs */ -void ws2812_setleds (struct cRGB *ledarray, uint16_t number_of_leds); -void ws2812_setleds_pin (struct cRGB *ledarray, uint16_t number_of_leds,uint8_t pinmask); -void ws2812_setleds_rgbw(struct cRGBW *ledarray, uint16_t number_of_leds); +void ws2812_setleds (LED_TYPE *ledarray, uint16_t number_of_leds); +void ws2812_setleds_pin (LED_TYPE *ledarray, uint16_t number_of_leds,uint8_t pinmask); +void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds); /* * Old interface / Internal functions diff --git a/quantum/quantum.c b/quantum/quantum.c index b8a81a76ba..9fd9a6ef72 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -131,6 +131,7 @@ bool process_record_quantum(keyrecord_t *record) { #endif #ifdef PRINTING_ENABLE process_printer(keycode, record) && + #endif #ifdef UNICODEMAP_ENABLE process_unicode_map(keycode, record) && #endif diff --git a/quantum/rgblight.c b/quantum/rgblight.c index 221a164026..1901010bf9 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -69,15 +69,12 @@ const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {100, 50, 20}; rgblight_config_t rgblight_config; rgblight_config_t inmem_config; -#ifdef RGBW - struct cRGBW led[RGBLED_NUM]; -#else - struct cRGB led[RGBLED_NUM]; -#endif -uint8_t rgblight_inited = 0; +LED_TYPE led[RGBLED_NUM]; +uint8_t rgblight_inited = 0; +bool rgblight_timer_enabled = false; -void sethsv(uint16_t hue, uint8_t sat, uint8_t val, struct cRGB *led1) { +void sethsv(uint16_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1) { uint8_t r = 0, g = 0, b = 0, base, color; if (sat == 0) { // Acromatic color (gray). Hue doesn't mind. @@ -128,7 +125,7 @@ void sethsv(uint16_t hue, uint8_t sat, uint8_t val, struct cRGB *led1) { setrgb(r, g, b, led1); } -void setrgb(uint8_t r, uint8_t g, uint8_t b, struct cRGB *led1) { +void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1) { (*led1).r = r; (*led1).g = g; (*led1).b = b; @@ -145,9 +142,9 @@ void eeconfig_update_rgblight_default(void) { dprintf("eeconfig_update_rgblight_default\n"); rgblight_config.enable = 1; rgblight_config.mode = 1; - rgblight_config.hue = 200; - rgblight_config.sat = 204; - rgblight_config.val = 204; + rgblight_config.hue = 0; + rgblight_config.sat = 255; + rgblight_config.val = 255; eeconfig_update_rgblight(rgblight_config.raw); } void eeconfig_debug_rgblight(void) { @@ -311,7 +308,7 @@ void rgblight_decrease_val(void) { void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val) { inmem_config.raw = rgblight_config.raw; if (rgblight_config.enable) { - struct cRGB tmp_led; + LED_TYPE tmp_led; sethsv(hue, sat, val, &tmp_led); inmem_config.hue = hue; inmem_config.sat = sat; @@ -378,51 +375,55 @@ void rgblight_set(void) { // Animation timer -- AVR Timer3 void rgblight_timer_init(void) { - static uint8_t rgblight_timer_is_init = 0; - if (rgblight_timer_is_init) { - return; - } - rgblight_timer_is_init = 1; - /* Timer 3 setup */ - TCCR3B = _BV(WGM32) //CTC mode OCR3A as TOP - | _BV(CS30); //Clock selelct: clk/1 - /* Set TOP value */ - uint8_t sreg = SREG; - cli(); - OCR3AH = (RGBLED_TIMER_TOP >> 8) & 0xff; - OCR3AL = RGBLED_TIMER_TOP & 0xff; - SREG = sreg; + // static uint8_t rgblight_timer_is_init = 0; + // if (rgblight_timer_is_init) { + // return; + // } + // rgblight_timer_is_init = 1; + // /* Timer 3 setup */ + // TCCR3B = _BV(WGM32) // CTC mode OCR3A as TOP + // | _BV(CS30); // Clock selelct: clk/1 + // /* Set TOP value */ + // uint8_t sreg = SREG; + // cli(); + // OCR3AH = (RGBLED_TIMER_TOP >> 8) & 0xff; + // OCR3AL = RGBLED_TIMER_TOP & 0xff; + // SREG = sreg; + + rgblight_timer_enabled = true; } void rgblight_timer_enable(void) { - TIMSK3 |= _BV(OCIE3A); + rgblight_timer_enabled = true; dprintf("TIMER3 enabled.\n"); } void rgblight_timer_disable(void) { - TIMSK3 &= ~_BV(OCIE3A); + rgblight_timer_enabled = false; dprintf("TIMER3 disabled.\n"); } void rgblight_timer_toggle(void) { - TIMSK3 ^= _BV(OCIE3A); + rgblight_timer_enabled ^= rgblight_timer_enabled; dprintf("TIMER3 toggled.\n"); } -ISR(TIMER3_COMPA_vect) { - // mode = 1, static light, do nothing here - if (rgblight_config.mode >= 2 && rgblight_config.mode <= 5) { - // mode = 2 to 5, breathing mode - rgblight_effect_breathing(rgblight_config.mode - 2); - } else if (rgblight_config.mode >= 6 && rgblight_config.mode <= 8) { - // mode = 6 to 8, rainbow mood mod - rgblight_effect_rainbow_mood(rgblight_config.mode - 6); - } else if (rgblight_config.mode >= 9 && rgblight_config.mode <= 14) { - // mode = 9 to 14, rainbow swirl mode - rgblight_effect_rainbow_swirl(rgblight_config.mode - 9); - } else if (rgblight_config.mode >= 15 && rgblight_config.mode <= 20) { - // mode = 15 to 20, snake mode - rgblight_effect_snake(rgblight_config.mode - 15); - } else if (rgblight_config.mode >= 21 && rgblight_config.mode <= 23) { - // mode = 21 to 23, knight mode - rgblight_effect_knight(rgblight_config.mode - 21); +void rgblight_task(void) { + if (rgblight_timer_enabled) { + // mode = 1, static light, do nothing here + if (rgblight_config.mode >= 2 && rgblight_config.mode <= 5) { + // mode = 2 to 5, breathing mode + rgblight_effect_breathing(rgblight_config.mode - 2); + } else if (rgblight_config.mode >= 6 && rgblight_config.mode <= 8) { + // mode = 6 to 8, rainbow mood mod + rgblight_effect_rainbow_mood(rgblight_config.mode - 6); + } else if (rgblight_config.mode >= 9 && rgblight_config.mode <= 14) { + // mode = 9 to 14, rainbow swirl mode + rgblight_effect_rainbow_swirl(rgblight_config.mode - 9); + } else if (rgblight_config.mode >= 15 && rgblight_config.mode <= 20) { + // mode = 15 to 20, snake mode + rgblight_effect_snake(rgblight_config.mode - 15); + } else if (rgblight_config.mode >= 21 && rgblight_config.mode <= 23) { + // mode = 21 to 23, knight mode + rgblight_effect_knight(rgblight_config.mode - 21); + } } } @@ -461,7 +462,7 @@ void rgblight_effect_rainbow_swirl(uint8_t interval) { last_timer = timer_read(); for (i = 0; i < RGBLED_NUM; i++) { hue = (360 / RGBLED_NUM * i + current_hue) % 360; - sethsv(hue, rgblight_config.sat, rgblight_config.val, &led[i]); + sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); } rgblight_set(); @@ -498,7 +499,7 @@ void rgblight_effect_snake(uint8_t interval) { k = k + RGBLED_NUM; } if (i == k) { - sethsv(rgblight_config.hue, rgblight_config.sat, (uint8_t)(rgblight_config.val*(RGBLIGHT_EFFECT_SNAKE_LENGTH-j)/RGBLIGHT_EFFECT_SNAKE_LENGTH), &led[i]); + sethsv(rgblight_config.hue, rgblight_config.sat, (uint8_t)(rgblight_config.val*(RGBLIGHT_EFFECT_SNAKE_LENGTH-j)/RGBLIGHT_EFFECT_SNAKE_LENGTH), (LED_TYPE *)&led[i]); } } } @@ -518,7 +519,7 @@ void rgblight_effect_knight(uint8_t interval) { static uint16_t last_timer = 0; uint8_t i, j, cur; int8_t k; - struct cRGB preled[RGBLED_NUM]; + LED_TYPE preled[RGBLED_NUM]; static int8_t increment = -1; if (timer_elapsed(last_timer) < pgm_read_byte(&RGBLED_KNIGHT_INTERVALS[interval])) { return; @@ -537,7 +538,7 @@ void rgblight_effect_knight(uint8_t interval) { k = RGBLED_NUM - 1; } if (i == k) { - sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, &preled[i]); + sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&preled[i]); } } } diff --git a/quantum/rgblight.h b/quantum/rgblight.h index efc685f312..d16ba24e53 100644 --- a/quantum/rgblight.h +++ b/quantum/rgblight.h @@ -1,8 +1,6 @@ #ifndef RGBLIGHT_H #define RGBLIGHT_H -#define RGBW 1 - #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) #define RGBLIGHT_MODES 23 #else @@ -35,6 +33,7 @@ #endif #define RGBLED_TIMER_TOP F_CPU/(256*64) +// #define RGBLED_TIMER_TOP 0xFF10 #include <stdint.h> #include <stdbool.h> @@ -79,10 +78,13 @@ void eeconfig_update_rgblight(uint32_t val); void eeconfig_update_rgblight_default(void); void eeconfig_debug_rgblight(void); -void sethsv(uint16_t hue, uint8_t sat, uint8_t val, struct cRGB *led1); -void setrgb(uint8_t r, uint8_t g, uint8_t b, struct cRGB *led1); +void sethsv(uint16_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1); +void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1); void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val); + +void rgblight_task(void); + void rgblight_timer_init(void); void rgblight_timer_enable(void); void rgblight_timer_disable(void); diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index 01c0e45b0b..fe466f6047 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -71,6 +71,10 @@ #include "virtser.h" #endif +#ifdef RGB_MIDI + #include "rgblight.h" +#endif + uint8_t keyboard_idle = 0; /* 0: Boot Protocol, 1: Report Protocol(default) */ uint8_t keyboard_protocol = 1; @@ -1045,6 +1049,10 @@ int main(void) #endif keyboard_task(); +#ifdef RGBLIGHT_ENABLE + rgblight_task(); +#endif + #ifdef VIRTSER_ENABLE virtser_task(); CDC_Device_USBTask(&cdc_device); @@ -1077,15 +1085,34 @@ void fallthrough_callback(MidiDevice * device, #endif } +#ifdef RGB_MIDI + rgblight_config_t rgblight_config; +#endif + void cc_callback(MidiDevice * device, uint8_t chan, uint8_t num, uint8_t val) { //sending it back on the next channel - midi_send_cc(device, (chan + 1) % 16, num, val); + // midi_send_cc(device, (chan + 1) % 16, num, val); + #ifdef RGB_MIDI + rgblight_config.raw = eeconfig_read_rgblight(); + switch (num) { + case 14: + rgblight_config.hue = val * 360 / 127; + break; + case 15: + rgblight_config.sat = val << 1; + break; + case 16: + rgblight_config.val = val << 1; + break; + } + rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val); + #endif } void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t * data) { - for (int i = 0; i < length; i++) - midi_send_cc(device, 15, 0x7F & data[i], 0x7F & (start + i)); + // for (int i = 0; i < length; i++) + // midi_send_cc(device, 15, 0x7F & data[i], 0x7F & (start + i)); } #endif |