diff options
63 files changed, 3293 insertions, 0 deletions
diff --git a/keyboards/sawnsprojects/krush/krush60/readme.md b/keyboards/sawnsprojects/krush/krush60/readme.md new file mode 100644 index 0000000000..515040f904 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/readme.md @@ -0,0 +1,25 @@ +# Krush60 + +A 60% keyboard sold in several variants. + +1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "Krush60" with krush keyboard case. Compatible with some 60% case, Singa, Bakeneko. + + **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board. + +* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) +* Hardware Supported: Krush60, SINGA, Bakeneko, 60% traymount case +* Hardware Availability: [Mechkey.store](https://mechkey.store/) + +Make examples for this keyboard (after setting up your build environment): + + make sawnsprojects/krush/krush60/solder:default + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/config.h b/keyboards/sawnsprojects/krush/krush60/solder/config.h new file mode 100644 index 0000000000..b15361ed14 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/config.h @@ -0,0 +1,60 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5350 +#define PRODUCT_ID 0x6B32 +#define DEVICE_VER 0x0001 +#define MANUFACTURER SawnsProjects +#define PRODUCT Krush60 - Solder + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 8 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B1, B2, D1, D2, D4, D6, F6, F7, F5, F4 } +#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D5, D3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW +/* Caps Lock */ +#define LED_CAPS_LOCK_PIN F0 + +#define RGB_DI_PIN F1 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 20 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#endif
\ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/info.json b/keyboards/sawnsprojects/krush/krush60/solder/info.json new file mode 100644 index 0000000000..884b768eb6 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/info.json @@ -0,0 +1,1274 @@ +{ + "keyboard_name": "Krush60 Solder", + "url": "", + "maintainer": "MaiTheSan", + "layouts": { + "LAYOUT_60_ansi": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_ansi_arrow": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y": 4, "w": 1.25}, + {"x":1.25, "y": 4, "w": 1.25}, + {"x":2.5, "y": 4, "w": 1.25}, + {"x":3.75, "y": 4, "w": 6.25}, + {"x":10, "y": 4}, + {"x":11, "y": 4}, + {"x":12, "y": 4}, + {"x":13, "y": 4}, + {"x":14, "y": 4} + ] + }, + "LAYOUT_60_ansi_arrow_split_bs_7u_spc": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y": 4, "w": 1.5}, + {"x":1.5, "y": 4}, + {"x":2.5, "y": 4, "w": 1.5}, + {"x":4, "y": 4, "w": 7}, + {"x":11, "y": 4}, + {"x":12, "y": 4}, + {"x":13, "y": 4}, + {"x":14, "y": 4} + ] + }, + "LAYOUT_60_ansi_split_bs": { + "layout": [ + {"x":0, "y": 0}, + {"x":1, "y": 0}, + {"x":2, "y": 0}, + {"x":3, "y": 0}, + {"x":4, "y": 0}, + {"x":5, "y": 0}, + {"x":6, "y": 0}, + {"x":7, "y": 0}, + {"x":8, "y": 0}, + {"x":9, "y": 0}, + {"x":10, "y": 0}, + {"x":11, "y": 0}, + {"x":12, "y": 0}, + {"x":13, "y": 0}, + {"x":14, "y": 0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_ansi_split_spc": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25},</ |