summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--keyboards/ymdk/bface/README.md55
-rw-r--r--keyboards/ymdk/bface/bface.c41
-rw-r--r--keyboards/ymdk/bface/bface.h69
-rw-r--r--keyboards/ymdk/bface/config.h41
-rw-r--r--keyboards/ymdk/bface/info.json20
-rw-r--r--keyboards/ymdk/bface/keymaps/default/config.h3
-rw-r--r--keyboards/ymdk/bface/keymaps/default/keymap.c60
-rw-r--r--keyboards/ymdk/bface/keymaps/default/readme.md11
-rw-r--r--keyboards/ymdk/bface/keymaps/emdarcher/config.h3
-rw-r--r--keyboards/ymdk/bface/keymaps/emdarcher/keymap.c69
-rw-r--r--keyboards/ymdk/bface/keymaps/emdarcher/readme.md14
-rw-r--r--keyboards/ymdk/bface/rules.mk33
-rw-r--r--keyboards/ymdk/bface/usbconfig.h393
13 files changed, 812 insertions, 0 deletions
diff --git a/keyboards/ymdk/bface/README.md b/keyboards/ymdk/bface/README.md
new file mode 100644
index 0000000000..f6a703bece
--- /dev/null
+++ b/keyboards/ymdk/bface/README.md
@@ -0,0 +1,55 @@
+# The YMDK "Bface" PCB
+
+![ymdk_bface](https://i.imgur.com/qhFxN0g.jpg)
+
+A 60% keyboard that runs ps2avrgb natively and fits the popular GH60 form factor. Another "bfake" or clone of the original B.face PCB by [Winkeyless](https://winkeyless.kr/product/b-face-x2-pcb/). This PCB has slightly different switch matrix than the origninal B.face, and is also different than the bfake. It commonly comes as the PCB in 60% keyboard kits sold by YMDK on Aliexpress.
+
+Keyboard Maintainer: QMK Community
+Hardware Supported: White Bface Mini USB PCB with no RGB.
+Hardware Availability: [Shenzhen YMD Tech Co. (YMDK) on Aliexpress](https://www.aliexpress.com/item/32799437588.html)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make ymdk/bface:default
+
+Flashing:
+
+ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
+
+This board has a pair of jumper holes on the left edge of the PCB marked "Jb", near TAB and CAPS LOCK. If you short the contacts with tweezers or wire the board will enter into the bootloader and you can flash it.
+
+Windows:
+1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
+2. Place your keyboard into reset.
+3. Press the `Find Device` button and ensure that your keyboard is found.
+4. Press the `Open .hex File` button and locate the `.hex` file you created.
+5. Press the `Flash Device` button and wait for the process to complete.
+
+macOS:
+1. Install homebrew by typing the following:
+ ```
+ /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+ ```
+2. Install `crosspack-avr`.
+ ```
+ brew cask install crosspack-avr
+ ```
+3. Install the following packages:
+ ```
+ brew install python
+ pip3 install pyusb
+ brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+ ```
+
+4. Place your keyboard into reset by shorting the jumper on the left edge of the PCB..
+5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file.
+
+Another method for Mac or Linux:
+After installing `bootloadHID`, you can use the `./util/atmega32a_program.py` program included in QMK. You will need to have `python` and the `pyusb` library installed.
+
+Then you can run this to compile the firmware and flash the board without using the jumper:
+```
+make ymdk/bface:default:program
+```
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/ymdk/bface/bface.c b/keyboards/ymdk/bface/bface.c
new file mode 100644
index 0000000000..8622fd5238
--- /dev/null
+++ b/keyboards/ymdk/bface/bface.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2019 Ethan Durrant (emdarcher)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "quantum.h"
+
+
+void keyboard_pre_init_kb(void){
+ //init the CAPS LOCK LED pin as an output
+ setPinOutput(D1);
+ //init the Backlight Pin as an output
+ setPinOutput(D4);
+ //call any user initialization code
+ keyboard_pre_init_user();
+}
+
+void led_set_kb(uint8_t usb_led){
+ //control the caps lock LED
+ if(IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)){
+ //set led pin to high
+ writePinHigh(D1);
+ } else {
+ //set to low
+ writePinLow(D1);
+ }
+ //call any user LED functions
+ led_set_user(usb_led);
+}
+
diff --git a/keyboards/ymdk/bface/bface.h b/keyboards/ymdk/bface/bface.h
new file mode 100644
index 0000000000..5f1c9578b6
--- /dev/null
+++ b/keyboards/ymdk/bface/bface.h
@@ -0,0 +1,69 @@
+/*
+Copyright 2019 Ethan Durrant (emdarcher)
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_all(\
+ K04, K14, K24, K34, K44, K54, K64, K74, K84, K94, KA4, KB4, KC4, KD4, KE4, \
+ K03, K13, K23, K33, K43, K53, K63, K73, K83, K93, KA3, KB3, KC3, KD3, \
+ K02, K12, K22, K32, K42, K52, K62, K72, K82, K92, KA2, KB2, KC2, KD2, \
+ K01, K11, K21, K31, K41, K51, K61, K71, K81, K91, KA1, KB1, KC1, KD1, KE1, \
+ K00, K10, K20, K30, K70, K80, K90, KA0, KB0, KC0, KD0 \
+){ \
+ { K00, K10, K20, K30, KC_NO, KC_NO, KC_NO,K70, K80, K90, KA0, KB0, KC0, KD0, KC_NO }, \
+ { K01, K11, K21, K31, K41, K51, K61, K71, K81, K91, KA1, KB1, KC1, KD1, KE1 }, \
+ { K02, K12, K22, K32, K42, K52, K62, K72, K82, K92, KA2, KB2, KC2, KD2, KC_NO }, \
+ { K03, K13, K23, K33, K43, K53, K63, K73, K83, K93, KA3, KB3, KC3, KD3, KC_NO }, \
+ { K04, K14, K24, K34, K44, K54, K64, K74, K84, K94, KA4, KB4, KC4, KD4, KE4 }, \
+}
+// 0 1 2 3 4 5 6 7 8 9 A B C D E
+// A0 A1 A2 A3 A4 A5 A6 A7 C7 C6 C5 C4 C3 C2 D7
+
+#define LAYOUT_60_ansi(\
+ K04, K14, K24, K34, K44, K54, K64, K74, K84, K94, KA4, KB4, KC4, KE4, \
+ K03, K13, K23, K33, K43, K53, K63, K73, K83, K93, KA3, KB3, KC3, KD3, \
+ K02, K12, K22, K32, K42, K52, K62, K72, K82, K92, KA2, KB2, KD2, \
+ K01, K21, K31, K41, K51, K61, K71, K81, K91, KA1, KB1, KD1, \
+ K00, K10, K20, K70, K90, KA0, KC0, KD0 \
+){ \
+ { K00, K10, K20, KC_NO, KC_NO, KC_NO, KC_NO, K70, KC_NO, K90, KA0, KC_NO, KC0, KD0, KC_NO }, \
+ { K01, KC_NO, K21, K31, K41, K51, K61, K71, K81, K91, KA1, KB1, KC_NO, KD1, KC_NO }, \
+ { K02, K12, K22, K32, K42, K52, K62, K72, K82, K92, KA2, KB2, KC_NO, KD2, KC_NO }, \
+ { K03, K13, K23, K33, K43, K53, K63, K73, K83, K93, KA3, KB3, KC3, KD3, KC_NO }, \
+ { K04, K14, K24, K34, K44, K54, K64, K74, K84, K94, KA4, KB4, KC4, KC_NO, KE4 }, \
+}
+// 0 1 2 3 4 5 6 7 8 9 A B C D E
+// A0 A1 A2 A3 A4 A5 A6 A7 C7 C6 C5 C4 C3 C2 D7
+
+#define LAYOUT_60_ansi_split_rshift(\
+ K04, K14, K24, K34, K44, K54, K64, K74, K84, K94, KA4, KB4, KC4, KE4, \
+ K03, K13, K23, K33, K43, K53, K63, K73, K83, K93, KA3, KB3, KC3, KD3, \
+ K02, K12, K22, K32, K42, K52, K62, K72, K82, K92, KA2, KB2, KD2, \
+ K01, K21, K31, K41, K51, K61, K71, K81, K91, KA1, KB1, KD1, KE1, \
+ K00, K10, K20, K70, K90, KA0, KC0, KD0 \
+){ \
+ { K00, K10, K20, KC_NO, KC_NO, KC_NO, KC_NO, K70, KC_NO, K90, KA0, KC_NO, KC0, KD0, KC_NO }, \
+ { K01, KC_NO, K21, K31, K41, K51, K61, K71, K81, K91, KA1, KB1, KC_NO, KD1, KE1 }, \
+ { K02, K12, K22, K32, K42, K52, K62, K72, K82, K92, KA2, KB2, KC_NO, KD2, KC_NO }, \
+ { K03, K13, K23, K33, K43, K53, K63, K73, K83, K93, KA3, KB3, KC3, KD3, KC_NO }, \
+ { K04, K14, K24, K34, K44, K54, K64, K74, K84, K94, KA4, KB4, KC4, KC_NO, KE4 }, \
+}
+// 0 1 2 3 4 5 6 7 8 9 A B C D E
+// A0 A1 A2 A3 A4 A5 A6 A7 C7 C6 C5 C4 C3 C2 D7
+
diff --git a/keyboards/ymdk/bface/config.h b/keyboards/ymdk/bface/config.h
new file mode 100644
index 0000000000..8eaa1188ee
--- /dev/null
+++ b/keyboards/ymdk/bface/config.h
@@ -0,0 +1,41 @@
+/*
+Copyright 2019 Ethan Durrant (emdarcher)
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define VENDOR_ID 0x20A0
+#define PRODUCT_ID 0x422D
+// You can edit those at usbconfig.h about line 250. These values will
+// unforunatly be ignored so far
+#define MANUFACTURER YMDK
+#define PRODUCT bface
+
+/* matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+// 0 1 2 3 4 5 6 7 8 9 A B C D E
+#define MATRIX_ROW_PINS { B7, B6, B5, B4, B3}
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7}
+#define UNUSED_PINS
+
+#define NO_UART 1
+
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_LEVELS 6
+
+
diff --git a/keyboards/ymdk/bface/info.json b/keyboards/ymdk/bface/info.json
new file mode 100644
index 0000000000..4e6e831595
--- /dev/null
+++ b/keyboards/ymdk/bface/info.json
@@ -0,0 +1,20 @@
+{
+ "keyboard_name": "YMDK Bface",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 15,
+ "height": 5,
+ "layouts": {
+ "LAYOUT_all": {
+ "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0},{"x":13, "y":0}, {"label":"Backspace", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2},{"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"x":0, "y":3},{"x":1, "y":3}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"x":12, "y":3},{"x":13, "y":3}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.75}, {"x":1.75, "y":4, "w":1.25}, {"x":3, "y":4, "w":1.25}, {"x":4.25, "y":4, "w":1.25},{"x":5.5, "y":4, "w":3}, {"x":8.5, "y":4, "w":1.25}, {"x":9.75, "y":4, "w":1.25}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}]
+ },
+
+ "LAYOUT_60_ansi": {
+ "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+ },
+
+ "LAYOUT_60_ansi_split_rshift": {
+ "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+ }
+ }
+}
diff --git a/keyboards/ymdk/bface/keymaps/default/config.h b/keyboards/ymdk/bface/keymaps/default/config.h
new file mode 100644
index 0000000000..e1a6eb1a2b
--- /dev/null
+++ b/keyboards/ymdk/bface/keymaps/default/config.h
@@ -0,0 +1,3 @@
+#pragma once
+
+#define GRAVE_ESC_ALT_OVERRIDE
diff --git a/keyboards/ymdk/bface/keymaps/default/keymap.c b/keyboards/ymdk/bface/keymaps/default/keymap.c
new file mode 100644
index 0000000000..9d2a2c9a0e
--- /dev/null
+++ b/keyboards/ymdk/bface/keymaps/default/keymap.c
@@ -0,0 +1,60 @@
+/*
+Copyright 2019 Ethan Durrant (emdarcher)
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+
+#define _FL 1
+#define _CL 2
+#define KC_X0 LT(_CL, KC_CAPS)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ //Base Layer
+ [0] = LAYOUT_60_ansi(
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS,
+ KC_X0, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT,
+ KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,MO(_FL),KC_MENU,KC_RCTL
+ ),
+ //FN Layer
+ [_FL] = LAYOUT_60_ansi(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PGUP,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_HOME,KC_PGDN, KC_END,KC_TRNS,KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS, BL_DEC,BL_TOGG, BL_INC,KC_MPLY,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS, KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
+ ),
+ //CAPS LOCK layer
+ [_CL] = LAYOUT_60_ansi(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_UP,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN,KC_RIGHT,KC_TRNS,KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
+ ),
+ /* You can copy this layer as base for a new fn layer * /
+ [n] = LAYOUT_60_ansi(
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
+ ),
+ */
+};
+
diff --git a/keyboards/ymdk/bface/keymaps/default/readme.md b/keyboards/ymdk/bface/keymaps/default/readme.md
new file mode 100644
index 0000000000..33c32a5117
--- /dev/null
+++ b/keyboards/ymdk/bface/keymaps/default/readme.md
@@ -0,0 +1,11 @@
+# Default Keymap
+
+Base Layer:
+![base](https://i.imgur.com/O7rNtDs.jpg)
+
+Standard ANSI 60% Layout.
+
+- GESC for ESC key.
+- FN layer with media and navigation controls.
+- CAPS LOCK layer (when held down) that has arrows mapped to IJKL keys.
+- FN+V = Backlight Toggle, FN+C = Backlight Decrease, FN+B = Backlight Increase
diff --git a/keyboards/ymdk/bface/keymaps/emdarcher/config.h b/keyboards/ymdk/bface/keymaps/emdarcher/config.h
new file mode 100644
index 0000000000..e1a6eb1a2b
--- /dev/null
+++ b/keyboards/ymdk/bface/keymaps/emdarcher/config.h
@@ -0,0 +1,3 @@
+#pragma once
+
+#define GRAVE_ESC_ALT_OVERRIDE
diff --git a/keyboards/ymdk/bface/keymaps/emdarcher/keymap.c b/keyboards/ymdk/bface/keymaps/emdarcher/keymap.c
new file mode 100644
index 0000000000..86cacfce50
--- /dev/null
+++ b/keyboards/ymdk/bface/keymaps/emdarcher/keymap.c
@@ -0,0 +1,69 @@
+/*
+Copyright 2019 Ethan Durrant (emdarcher)
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+
+#define _FL 1
+#define _CL 2
+#define _AL 3
+#define KC_X0 LT(_CL, KC_CAPS)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ //Base layer
+ [0] = LAYOUT_60_ansi_split_rshift(
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS,
+ KC_X0, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP,
+ KC_LCTL, KC_LALT,KC_LGUI, KC_SPC, MO(_FL),MO(_AL),KC_RCTL, KC_DOWN
+ ),
+ //FN Layer
+ [_FL] = LAYOUT_60_ansi_split_rshift(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MRWD,KC_MFFD,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MPLY,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS, KC_TRNS,KC_PGUP,
+ KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_PGDN
+ ),
+ //CAPS LOCK Layer
+ [_CL] = LAYOUT_60_ansi_split_rshift(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN, KC_UP,KC_RIGHT,KC_TRNS,KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_HOME,
+ KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_END
+ ),
+ //Alt layer
+ [_AL] = LAYOUT_60_ansi_split_rshift(
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_UP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN,KC_RIGHT,KC_TRNS,KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS
+ ),
+ /* You can copy this layer as base for a new fn layer * /
+ [n] = LAYOUT_60_ansi_split_rshift(
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS
+ ),
+ */
+};
+
diff --git a/keyboards/ymdk/bface/keymaps/emdarcher/readme.md b/keyboards/ymdk/bface/keymaps/emdarcher/readme.md
new file mode 100644
index 0000000000..7cba92fab6
--- /dev/null
+++ b/keyboards/ymdk/bface/keymaps/emdarcher/readme.md
@@ -0,0 +1,14 @@
+# emdarcher's keymap
+
+Base Layer:
+![base](https://i.imgur.com/ie5aF7d.jpg)
+
+Uses a tweaked 60% ANSI layout with split right shift and up/down keys in the bottom right. Resulted from being used to 65% boards with arrow keys in bottom right and using the up/down arrows a lot in terminal.
+
+- Page Up/Down, and Home/End have been mapped to the up/down keys on different layers.
+- The Caps Lock Layer uses VIM style directions on HJKL keys.
+- LGUI moved to Mac Command Key location
+- FN2 layer that has arrows on IJKL for one-handed arrow key control.
+- Added Print Screen, Scroll Lock, and Pause keys on P,[,] keys to add Mac screen brightness control.
+ * On Mac, Scroll Lock is Brightness Down and Pause is Brightness Up, so with this FN+[ = brighness down, FN+] = brightness up
+- Has Mac Fast-forward and Rewind keys mapped for changing media tracks. FN+; = Rewind, FN+' = Fast-forward
diff --git a/keyboards/ymdk/bface/rules.mk b/keyboards/ymdk/bface/rules.mk
new file mode 100644
index 0000000000..8f1f83f78e
--- /dev/null
+++ b/keyboards/ymdk/bface/rules.mk
@@ -0,0 +1,33 @@
+# Copyright 2019 Ethan Durrant (emdarcher)
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# MCU name
+MCU = atmega32a
+
+# build options
+BOOTMAGIC_ENABLE = no
+MOUSEKEY_ENABLE = yes
+EXTRAKEY_ENABLE = yes
+CONSOLE_ENABLE = no
+COMMAND_ENABLE = yes
+BACKLIGHT_ENABLE = yes
+BACKLIGHT_CUSTOM_DRIVER = no
+BACKLIGHT_BREATHING = no
+RGBLIGHT_ENABLE = no
+RGBLIGHT_CUSTOM_DRIVER = no
+
+OPT_DEFS = -DDEBUG_LEVEL=0
+BOOTLOADER = bootloadHID
+
diff --git a/keyboards/ymdk/bface/usbconfig.h b/keyboards/ymdk/bface/usbconfig.h
new file mode 100644
index 0000000000..c9d0fe4d97
--- /dev/null
+++ b/keyboards/ymdk/bface/usbconfig.h
@@ -0,0 +1,393 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#pragma once
+
+#include "config.h"
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT 3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT 2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC 0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT 4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT 1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER 3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT 0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE 0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL 1
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED 0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+#define USB_CFG_MAX_BUS_POWER 500
+/* Set this variable to the maximum USB bus power consumption of your device.
+ * The value is in milliamperes. [It will be divided by two since USB
+ * communicates power requirements in units of 2 mA.]
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE 1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ 0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL 0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE 0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS 0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF 1
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ * in YL, TCNT0
+ * sts timer0Snapshot, YL
+ * endm
+ * #endif
+ * #define USB_SOF_HOOK myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every