diff options
| -rw-r--r-- | keyboards/melody96/config.h | 58 | ||||
| -rw-r--r-- | keyboards/melody96/keymaps/default/keymap.c | 70 | ||||
| -rw-r--r-- | keyboards/melody96/melody96.c | 1 | ||||
| -rw-r--r-- | keyboards/melody96/melody96.h | 28 | ||||
| -rw-r--r-- | keyboards/melody96/readme.md | 15 | ||||
| -rw-r--r-- | keyboards/melody96/rules.mk | 57 |
6 files changed, 229 insertions, 0 deletions
diff --git a/keyboards/melody96/config.h b/keyboards/melody96/config.h new file mode 100644 index 0000000000..6083dcf751 --- /dev/null +++ b/keyboards/melody96/config.h @@ -0,0 +1,58 @@ +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER YMDK +#define PRODUCT Melody96 +#define DESCRIPTION Melody96 + +/* key matrix size */ +#define MATRIX_ROWS 12 +#define MATRIX_COLS 9 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0, E6, F0, F1, F4, F5, F6, F7 } +#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* number of backlight levels */ +#define BACKLIGHT_PIN B6 +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 5 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* prevent stuck modifiers */ +#define PREVENT_STUCK_MODIFIERS + +#define RGB_DI_PIN E2 +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 18 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif + +#endif diff --git a/keyboards/melody96/keymaps/default/keymap.c b/keyboards/melody96/keymaps/default/keymap.c new file mode 100644 index 0000000000..85b12ced11 --- /dev/null +++ b/keyboards/melody96/keymaps/default/keymap.c @@ -0,0 +1,70 @@ +#include QMK_KEYBOARD_H + +#define _______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_DEL, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), MO(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT), + + LAYOUT( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_TOG, _______, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, + BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + return MACRO_NONE; +} + +void matrix_init_user(void) { +} + +void matrix_scan_user(void) { +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + + if (usb_led & (1 << USB_LED_NUM_LOCK)) { + DDRC |= (1 << 6); PORTC &= ~(1 << 6); + } else { + DDRC &= ~(1 << 6); PORTC &= ~(1 << 6); + } + + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + DDRC |= (1 << 7); PORTC &= ~(1 << 7); + } else { + DDRC &= ~(1 << 7); PORTC &= ~(1 << 7); + } + + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + DDRB |= (1 << 5); PORTB &= ~(1 << 5); + } else { + DDRB &= ~(1 << 5); PORTB &= ~(1 << 5); + } + + if (usb_led & (1 << USB_LED_COMPOSE)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_KANA)) { + + } else { + + } + +} diff --git a/keyboards/melody96/melody96.c b/keyboards/melody96/melody96.c new file mode 100644 index 0000000000..44e813586b --- /dev/null +++ b/keyboards/melody96/melody96.c @@ -0,0 +1 @@ +#include "melody96.h" diff --git a/keyboards/melody96/melody96.h b/keyboards/melody96/melody96.h new file mode 100644 index 0000000000..f60f054cae --- /dev/null +++ b/keyboards/melody96/melody96.h @@ -0,0 +1,28 @@ +#ifndef MELODY96_H +#define MELODY96_H + +#include "quantum.h" + +#define LAYOUT( \ + K050, K051, K052, K053, K054, K055, K056, K057, K058, K118, K117, K115, K114, K113, K116, K112, K111, K110, K063, \ + K040, K041, K042, K043, K044, K045, K046, K047, K048, K108, K107, K105, K104, K103, K106, K102, K101, K100, K064, \ + K030, K031, K032, K033, K034, K035, K036, K037, K038, K098, K097, K095, K094, K084, K096, K092, K091, K090, \ + K020, K021, K022, K023, K024, K025, K026, K027, K028, K088, K087, K085, K093, K086, K082, K081, K080, \ + K010, K011, K012, K013, K014, K015, K016, K017, K018, K078, K077, K075, K074, K073, K076, K072, K071, K070, \ + K000, K001, K002, K006, K008, K007, K005, K004, K003, K066, K062, K061, K060 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008 }, \ + { K010, K011, K012, K013, K014, K015, K016, K017, K018 }, \ + { K020, K021, K022, K023, K024, K025, K026, K027, K028 }, \ + { K030, K031, K032, K033, K034, K035, K036, K037, K038 }, \ + { K040, K041, K042, K043, K044, K045, K046, K047, K048 }, \ + { K050, K051, K052, K053, K054, K055, K056, K057, K058 }, \ + { K060, K061, K062, K063, K064, KC_NO, K066, KC_NO, KC_NO }, \ + { K070, K071, K072, K073, K074, K075, K076, K077, K078 }, \ + { K080, K081, K082, KC_NO, K084, K085, K086, K087, K088 }, \ + { K090, K091, K092, K093, K094, K095, K096, K097, K098 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108 }, \ + { K110, K111, K112, K113, K114, K115, K116, K117, K118 } \ +} + +#endif diff --git a/keyboards/melody96/readme.md b/keyboards/melody96/readme.md new file mode 100644 index 0000000000..b43398dd35 --- /dev/null +++ b/keyboards/melody96/readme.md @@ -0,0 +1,15 @@ +# YMDK Melody96 + + + +96-key Keyboard from YMDK + +Keyboard Maintainer: [superuser41](https://github.com/kaylanm) +Hardware Supported: melody96 +Hardware Availability: [YMDK, group buy closed](https://geekhack.org/index.php?topic=93614.0) + +Make example for this keyboard (after setting up your build environment): + + make melody96:default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/melody96/rules.mk b/keyboards/melody96/rules.mk new file mode 100644 index 0000000000..be0f84b170 --- /dev/null +++ b/keyboards/melody96/rules.mk @@ -0,0 +1,57 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +OPT_DEFS += -DBOOTLOADER_SIZE=4096 +BOOTLOADER = atmel-dfu + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +AUDIO_ENABLE = no +RGBLIGHT_ENABLE = yes |