diff options
| -rw-r--r-- | bootloader.mk | 3 | ||||
| -rw-r--r-- | data/schemas/keyboard.jsonschema | 2 | ||||
| -rw-r--r-- | docs/flashing.md | 26 | ||||
| -rw-r--r-- | keyboards/handwired/onekey/blackpill_f411_tinyuf2/chconf.h | 21 | ||||
| -rwxr-xr-x | keyboards/handwired/onekey/blackpill_f411_tinyuf2/config.h | 31 | ||||
| -rw-r--r-- | keyboards/handwired/onekey/blackpill_f411_tinyuf2/halconf.h | 22 | ||||
| -rwxr-xr-x | keyboards/handwired/onekey/blackpill_f411_tinyuf2/mcuconf.h | 24 | ||||
| -rwxr-xr-x | keyboards/handwired/onekey/blackpill_f411_tinyuf2/readme.md | 9 | ||||
| -rwxr-xr-x | keyboards/handwired/onekey/blackpill_f411_tinyuf2/rules.mk | 10 | ||||
| -rw-r--r-- | platforms/chibios/BLACKPILL_STM32_F411/ld/STM32F411xC_tinyuf2.ld | 89 | ||||
| -rw-r--r-- | platforms/chibios/BLACKPILL_STM32_F411/ld/STM32F411xE_tinyuf2.ld | 89 | ||||
| -rw-r--r-- | quantum/mcu_selection.mk | 7 | ||||
| -rw-r--r-- | tmk_core/chibios.mk | 2 | ||||
| -rw-r--r-- | tmk_core/common/chibios/bootloader.c | 17 |
14 files changed, 349 insertions, 3 deletions
diff --git a/bootloader.mk b/bootloader.mk index fd76446e99..ead52cbe3d 100644 --- a/bootloader.mk +++ b/bootloader.mk @@ -137,3 +137,6 @@ ifeq ($(strip $(BOOTLOADER)), stm32duino) DFU_ARGS = -d 1EAF:0003 -a 2 -R DFU_SUFFIX_ARGS = -v 1EAF -p 0003 endif +ifeq ($(strip $(BOOTLOADER)), tinyuf2) + OPT_DEFS += -DBOOTLOADER_TINYUF2 +endif diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index 3034242fd9..276f66413e 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -34,7 +34,7 @@ }, "bootloader": { "type": "string", - "enum": ["atmel-dfu", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "micronucleus", "qmk-dfu", "stm32-dfu", "stm32duino", "unknown", "USBasp"] + "enum": ["atmel-dfu", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "micronucleus", "qmk-dfu", "stm32-dfu", "stm32duino", "unknown", "USBasp", "tinyuf2"] }, "diode_direction": { "type": "string", diff --git a/docs/flashing.md b/docs/flashing.md index 7804a6bad8..83c97444e1 100644 --- a/docs/flashing.md +++ b/docs/flashing.md @@ -249,3 +249,29 @@ Flashing sequence: 2. Wait for the OS to detect the device 3. Flash a .bin file 4. Reset the device into application mode (may be done automatically) + +## tinyuf2 + +Keyboards may opt into supporting the tinyuf2 bootloader. This is currently only supported on the F411 blackpill. + +The `rules.mk` setting for this bootloader is `tinyuf2`, and can be specified at the keymap or user level. + +To ensure compatibility with the tinyuf2 bootloader, make sure this block is present in your `rules.mk`: + +```make +# Bootloader selection +BOOTLOADER = tinyuf2 +``` + +Compatible flashers: + +* Any application able to copy a file from one place to another, such as _macOS Finder_ or _Windows Explorer_. + +Flashing sequence: + +1. Enter the bootloader using any of the following methods: + * Tap the `RESET` keycode + * Double-tap the `nRST` button on the PCB. +2. Wait for the OS to detect the device +3. Copy the .uf2 file to the new USB disk +4. Wait for the keyboard to become available diff --git a/keyboards/handwired/onekey/blackpill_f411_tinyuf2/chconf.h b/keyboards/handwired/onekey/blackpill_f411_tinyuf2/chconf.h new file mode 100644 index 0000000000..3d9a393638 --- /dev/null +++ b/keyboards/handwired/onekey/blackpill_f411_tinyuf2/chconf.h @@ -0,0 +1,21 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#define CH_CFG_ST_FREQUENCY 10000 + +#include_next <chconf.h> diff --git a/keyboards/handwired/onekey/blackpill_f411_tinyuf2/config.h b/keyboards/handwired/onekey/blackpill_f411_tinyuf2/config.h new file mode 100755 index 0000000000..95e99aacc1 --- /dev/null +++ b/keyboards/handwired/onekey/blackpill_f411_tinyuf2/config.h @@ -0,0 +1,31 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +#define MATRIX_COL_PINS { B0 } +#define MATRIX_ROW_PINS { A7 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN A0 +#define BACKLIGHT_PWM_DRIVER PWMD5 +#define BACKLIGHT_PWM_CHANNEL 1 + +#define RGB_DI_PIN A1 + +#define ADC_PIN A0 diff --git a/keyboards/handwired/onekey/blackpill_f411_tinyuf2/halconf.h b/keyboards/handwired/onekey/blackpill_f411_tinyuf2/halconf.h new file mode 100644 index 0000000000..e15870984f --- /dev/null +++ b/keyboards/handwired/onekey/blackpill_f411_tinyuf2/halconf.h @@ -0,0 +1,22 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#define HAL_USE_I2C TRUE +#define HAL_USE_PWM TRUE + +#include_next <halconf.h> diff --git a/keyboards/handwired/onekey/blackpill_f411_tinyuf2/mcuconf.h b/keyboards/handwired/onekey/blackpill_f411_tinyuf2/mcuconf.h new file mode 100755 index 0000000000..ad8aecdb10 --- /dev/null +++ b/keyboards/handwired/onekey/blackpill_f411_tinyuf2/mcuconf.h @@ -0,0 +1,24 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#include_next "mcuconf.h" + +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE + +#undef STM32_PWM_USE_TIM5 +#define STM32_PWM_USE_TIM5 TRUE diff --git a/keyboards/handwired/onekey/blackpill_f411_tinyuf2/readme.md b/keyboards/handwired/onekey/blackpill_f411_tinyuf2/readme.md new file mode 100755 index 0000000000..ff43658f4c --- /dev/null +++ b/keyboards/handwired/onekey/blackpill_f411_tinyuf2/readme.md @@ -0,0 +1,9 @@ +# f411 blackpill onekey + +Supported Hardware: *STM32F411CEU6 WeAct v1.3*. + +To trigger keypress, short together pins *B0* and *A7*. + +This variant requires the TinyUF2 bootloader to be installed. This can be downloaded from the [tinyuf2 releases page](https://github.com/adafruit/tinyuf2/releases). The F401 blackpill binary works for both F401- and F411-based blackpill devices. + +Double-tap reset to enter bootloader mode. Copy the built uf2 file to the device by dragging the file to the new USB disk.
\ No newline at end of file diff --git a/keyboards/handwired/onekey/blackpill_f411_tinyuf2/rules.mk b/keyboards/handwired/onekey/blackpill_f411_tinyuf2/rules.mk new file mode 100755 index 0000000000..ec38577b2b --- /dev/null +++ b/keyboards/handwired/onekey/blackpill_f411_tinyuf2/rules.mk @@ -0,0 +1,10 @@ +# MCU name +MCU = STM32F411 + +# Build Options +# change yes to no to disable +# +KEYBOARD_SHARED_EP = yes + +# We want to use the tinyuf2 bootloader... +BOOTLOADER = tinyuf2
\ No newline at end of file diff --git a/platforms/chibios/BLACKPILL_STM32_F411/ld/STM32F411xC_tinyuf2.ld b/platforms/chibios/BLACKPILL_STM32_F411/ld/STM32F411xC_tinyuf2.ld new file mode 100644 index 0000000000..82253d3de5 --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F411/ld/STM32F411xC_tinyuf2.ld @@ -0,0 +1,89 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F411xC memory setup. + */ +MEMORY +{ + flash0 (rx) : org = 0x08000000 + 64k, len = 256k - 64k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */ + flash1 (rx) : org = 0x00000000, len = 0 + flash2 (rx) : org = 0x00000000, len = 0 + flash3 (rx) : org = 0x00000000, len = 0 + flash4 (rx) : org = 0x00000000, len = 0 + flash5 (rx) : org = 0x00000000, len = 0 + flash6 (rx) : org = 0x00000000, len = 0 + flash7 (rx) : org = 0x00000000, len = 0 + ram0 (wx) : org = 0x20000000, len = 128k + ram1 (wx) : org = 0x00000000, len = 0 + ram2 (wx) : org = 0x00000000, len = 0 + ram3 (wx) : org = 0x00000000, len = 0 + ram4 (wx) : org = 0x00000000, len = 0 + ram5 (wx) : org = 0x00000000, len = 0 + ram6 (wx) : org = 0x00000000, len = 0 + ram7 (wx) : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash0); +REGION_ALIAS("VECTORS_FLASH_LMA", flash0); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash0); +REGION_ALIAS("XTORS_FLASH_LMA", flash0); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash0); +REGION_ALIAS("TEXT_FLASH_LMA", flash0); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash0); +REGION_ALIAS("RODATA_FLASH_LMA", flash0); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash0); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash0); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld + +/* TinyUF2 bootloader reset support */ +_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */ + diff --git a/platforms/chibios/BLACKPILL_STM32_F411/ld/STM32F411xE_tinyuf2.ld b/platforms/chibios/BLACKPILL_STM32_F411/ld/STM32F411xE_tinyuf2.ld new file mode 100644 index 0000000000..1656c67bf7 --- /dev/null +++ b/platforms/chibios/BLACKPILL_STM32_F411/ld/STM32F411xE_tinyuf2.ld @@ -0,0 +1,89 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F411xE memory setup. + */ +MEMORY +{ + flash0 (rx) : org = 0x08000000 + 64k, len = 512k - 64k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */ + flash1 (rx) : org = 0x00000000, len = 0 + flash2 (rx) : org = 0x00000000, len = 0 + flash3 (rx) : org = 0x00000000, len = 0 + flash4 (rx) : org = 0x00000000, len = 0 + flash5 (rx) : org = 0x00000000, len = 0 + flash6 (rx) : org = 0x00000000, len = 0 + flash7 (rx) : org = 0x00000000, len = 0 + ram0 (wx) : org = 0x20000000, len = 128k + ram1 (wx) : org = 0x00000000, len = 0 + ram2 (wx) : org = 0x00000000, len = 0 + ram3 (wx) : org = 0x00000000, len = 0 + ram4 (wx) : org = 0x00000000, len = 0 + ram5 (wx) : org = 0x00000000, len = 0 + ram6 (wx) : org = 0x00000000, len = 0 + ram7 (wx) : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash0); +REGION_ALIAS("VECTORS_FLASH_LMA", flash0); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash0); +REGION_ALIAS("XTORS_FLASH_LMA", flash0); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash0); +REGION_ALIAS("TEXT_FLASH_LMA", flash0); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash0); +REGION_ALIAS("RODATA_FLASH_LMA", flash0); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash0); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash0); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld + +/* TinyUF2 bootloader reset support */ +_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */ + diff --git a/quantum/mcu_selection.mk b/quantum/mcu_selection.mk index 2e4d250089..437d354fbe 100644 --- a/quantum/mcu_selection.mk +++ b/quantum/mcu_selection.mk @@ -304,7 +304,12 @@ ifneq ($(findstring STM32F411, $(MCU)),) # Linker script to use # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ # or <keyboard_dir>/ld/ - MCU_LDSCRIPT ?= STM32F411xE + ifeq ($(strip $(BOOTLOADER)), tinyuf2) + MCU_LDSCRIPT ?= STM32F411xE_tinyuf2 + FIRMWARE_FORMAT ?= uf2 + else + MCU_LDSCRIPT ?= STM32F411xE + endif # Startup code to use # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ diff --git a/tmk_core/chibios.mk b/tmk_core/chibios.mk index 40595a1e3b..cdf9ba6495 100644 --- a/tmk_core/chibios.mk +++ b/tmk_core/chibios.mk @@ -190,6 +190,8 @@ else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/ld/$(MCU_LDSCRIPT).ld)","") LDSCRIPT = $(KEYBOARD_PATH_2)/ld/$(MCU_LDSCRIPT).ld else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/ld/$(MCU_LDSCRIPT).ld)","") LDSCRIPT = $(KEYBOARD_PATH_1)/ld/$(MCU_LDSCRIPT).ld +else ifneq ("$(wildcard $(TOP_DIR)/platforms/chibios/$(BOARD)/ld/$(MCU_LDSCRIPT).ld)","") + LDSCRIPT = $(TOP_DIR)/platforms/chibios/$(BOARD)/ld/$(MCU_LDSCRIPT).ld else ifneq ("$(wildcard $(TOP_DIR)/platforms/chibios/common/ld/$(MCU_LDSCRIPT).ld)","") LDSCRIPT = $(TOP_DIR)/platforms/chibios/common/ld/$(MCU_LDSCRIPT).ld else ifneq ("$(wildcard $(STARTUPLD_CONTRIB)/$(MCU_LDSCRIPT).ld)","") diff --git a/tmk_core/common/chibios/bootloader.c b/tmk_core/common/chibios/bootloader.c index 4a175a6283..f91ac7d9eb 100644 --- a/tmk_core/common/chibios/bootloader.c +++ b/tmk_core/common/chibios/bootloader.c @@ -13,7 +13,22 @@ # define STM32_BOOTLOADER_DUAL_BANK FALSE #endif -#if STM32_BOOTLOADER_DUAL_BANK +#ifdef BOOTLOADER_TINYUF2 + +# define DBL_TAP_MAGIC 0xf01669ef // From tinyuf2's board_api.h + +// defined by linker script +extern uint32_t _board_dfu_dbl_tap[]; +# define DBL_TAP_REG _board_dfu_dbl_tap[0] + +void bootloader_jump(void) { + DBL_TAP_REG = DBL_TAP_MAGIC; + NVIC_SystemReset(); +} + +void enter_bootloader_mode_if_requested(void) { /* not needed, no two-stage reset */ } + +#elif STM32_BOOTLOADER_DUAL_BANK // Need pin definitions # include "config_common.h" |