diff options
| -rw-r--r-- | keyboards/atreus/atreus.h | 2 | ||||
| -rw-r--r-- | keyboards/atreus/feather/config.h | 40 | ||||
| -rw-r--r-- | keyboards/atreus/feather/feather.c | 16 | ||||
| -rw-r--r-- | keyboards/atreus/feather/feather.h | 17 | ||||
| -rw-r--r-- | keyboards/atreus/feather/readme.md | 60 | ||||
| -rw-r--r-- | keyboards/atreus/feather/rules.mk | 21 | ||||
| -rw-r--r-- | keyboards/atreus/keymaps/clash/keymap.c | 41 |
7 files changed, 197 insertions, 0 deletions
diff --git a/keyboards/atreus/atreus.h b/keyboards/atreus/atreus.h index a3d3507759..f4e7ba7f39 100644 --- a/keyboards/atreus/atreus.h +++ b/keyboards/atreus/atreus.h @@ -22,6 +22,8 @@ #include "astar.h" #elif KEYBOARD_atreus_astar_mirrored #include "astar_mirrored.h" +#elif KEYBOARD_atreus_feather + #include "feather.h" #elif KEYBOARD_atreus_teensy2 #include "teensy2.h" #elif KEYBOARD_atreus_promicro diff --git a/keyboards/atreus/feather/config.h b/keyboards/atreus/feather/config.h new file mode 100644 index 0000000000..72c9cd716b --- /dev/null +++ b/keyboards/atreus/feather/config.h @@ -0,0 +1,40 @@ +/* Copyright 2019 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +// #define MATRIX_ROW_PINS { D0, D1, D3, D2 } +// #define MATRIX_COL_PINS { D7, C6, B5, B4, E6, D4, B6, F6, F7, D6, B7 } +#define MATRIX_ROW_PINS { B7, D6, C7, F5 } +#define MATRIX_COL_PINS { D7, B5, D1, D0, C6, B6, F0, D2, D3, F4, F1 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +#define OUTPUT_AUTO_ENABLE diff --git a/keyboards/atreus/feather/feather.c b/keyboards/atreus/feather/feather.c new file mode 100644 index 0000000000..ceebc51c23 --- /dev/null +++ b/keyboards/atreus/feather/feather.c @@ -0,0 +1,16 @@ +/* Copyright 2019 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "feather.h" diff --git a/keyboards/atreus/feather/feather.h b/keyboards/atreus/feather/feather.h new file mode 100644 index 0000000000..bf74ceb17f --- /dev/null +++ b/keyboards/atreus/feather/feather.h @@ -0,0 +1,17 @@ +/* Copyright 2019 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once diff --git a/keyboards/atreus/feather/readme.md b/keyboards/atreus/feather/readme.md new file mode 100644 index 0000000000..f584da22c0 --- /dev/null +++ b/keyboards/atreus/feather/readme.md @@ -0,0 +1,60 @@ +# Bluetreus - a conversion of an Atreus to use a Bluetooth microcontroller + +I have created a keymap for this with Bluetooth control on layer 2 so that you +can switch the keyboard between auto, USB only, and Bluetooth only. I'm +working on fixing turning on auto by default, but have still not succeeded. + +To build it and flash it, do: + +``` +make atreus/feather:clash:flash +``` + +## Wiring it up +Physically, SDA to pin 13 on the new board are connected to what 9-1 were +connected to on the old board. Pin 0 from the old board is brought over to the +other side with a jumper wire to pin a2. TX, RX, A5, A4, A3 on the new board +connect to what a0 to 12 connected to on the old board. GND attaches to g. +You have to bend some of the pins at about a 45 degree angle to make them line up. +Here's a side view of what the most bent pins look like: + +Here's a top view, USB port down, wireless antenna up. Note: the USB port orientation is opposite what it used to be. + + +### New board: +This is an [Adafruit Feather BLE](https://learn.adafruit.com/adafruit-feather-32u4-bluefruit-le/pinouts) + +|QMK | Screen Print | Feather |SCREEN|QMK REF | +|----|--------------|-------------|------|---------| +| D1 | SDA | RADIO | dfu | | +| D0 | SCL | | 1/TX | D3 | +| C6 | 5 | | 0/RX | D2 | +| D7 | 6 | | MISO | B3/Blue | +| B5 | 9 | | MOSI | B2/Blue | +| B6 | 10 | | SCK | B1/Blue | +| B7 | 11 | | A5 | F0 | +| D6 | 12 | | a4 | F1 | +| C7 | 13 | | a3 | F4 | +| | usb | | a2 | F5 | +| | e0 | | a1 | F6 | +| | bat | | a0 | | +| | Battery | | GND | | +| | Connector | | ARf | | +| | | | | USB PORT | 3V | | +| | v v | | RST | | + +### Old board: +This is an A Star, non-flipped + +|QMK| Scrn | A | Scrn|QMK | +|---|------|-----|-----|----| +| b5| 9 | USB | a0 | F7 | +| b4| 8 | port| a1 | F6 | +| e6| 7 | | 10 | B6 | +| d7| 6 | | 11 | B7 | +| c6| 5 | | 12 | D6 | +| d4| 4 | | rst | RST| +| d0| 3 | | 3v | x | +| d1| 2 | | 5v | x | +| d3| 1 | | g | G | +| d2| 0 | | v | x | diff --git a/keyboards/atreus/feather/rules.mk b/keyboards/atreus/feather/rules.mk new file mode 100644 index 0000000000..e40b103acb --- /dev/null +++ b/keyboards/atreus/feather/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency +F_CPU = 8000000 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BLUETOOTH = AdafruitBLE +CONSOLE_ENABLE = no diff --git a/keyboards/atreus/keymaps/clash/keymap.c b/keyboards/atreus/keymaps/clash/keymap.c new file mode 100644 index 0000000000..3a8b5bf479 --- /dev/null +++ b/keyboards/atreus/keymaps/clash/keymap.c @@ -0,0 +1,41 @@ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QW 0 +#define _RS 1 +#define _LW 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QW] = LAYOUT( /* Qwerty */ + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P , + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN , + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH , + KC_ESC, KC_TAB, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, MO(_RS), KC_MINS, KC_QUOT, KC_ENT + ), + + /* + * ! @ up { } || pgup 7 8 9 * + * # left down right $ || pgdn 4 5 6 + + * [ ] ( ) & || ` 1 2 3 \ + * lower insert super shift del ctrl || alt space fn . 0 = + */ + [_RS] = LAYOUT( /* [> RAISE <] */ + KC_EXLM, KC_AT, KC_UP, KC_LCBR, KC_RCBR, KC_PGUP, KC_7, KC_8, KC_9, KC_ASTR , + KC_HASH, KC_LEFT, KC_DOWN, KC_RGHT, KC_DLR, KC_PGDN, KC_4, KC_5, KC_6, KC_PLUS , + KC_LBRC, KC_RBRC, KC_LPRN, KC_RPRN, KC_AMPR, KC_GRV, KC_1, KC_2, KC_3, KC_BSLS , + TG(_LW), KC_INS, KC_LGUI, KC_LSFT, KC_DEL, KC_LCTL, KC_LALT, KC_SPC, KC_TRNS, KC_DOT, KC_0, KC_EQL ), + /* + * insert home mup end pgup || mouse1 F7 F8 F9 F10 + * USB mlft mdwn mrght pgdn || mouse2 F4 F5 F6 F11 + * Blue volup reset || mouse3 F1 F2 F3 F12 + * auto voldn super shift bksp ctrl || alt space L0 prtsc scroll pause + */ + [_LW] = LAYOUT( /* [> LOWER <] */ + KC_INS, KC_HOME, KC_MS_U, KC_END, KC_PGUP, KC_BTN1, KC_F7, KC_F8, KC_F9, KC_F10 , + OUT_USB, KC_MS_L, KC_MS_D, KC_MS_R, KC_PGDN, KC_BTN2, KC_F4, KC_F5, KC_F6, KC_F11 , + OUT_BT, KC_VOLU, KC_NO, KC_NO, RESET, KC_BTN3, KC_F1, KC_F2, KC_F3, KC_F12 , + OUT_AUTO, KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC, TO(_QW), KC_PSCR, KC_SLCK, KC_PAUS ) +}; |