diff options
| -rw-r--r-- | keyboards/k_type/i2c_master.c | 145 | ||||
| -rw-r--r-- | keyboards/k_type/i2c_master.h | 127 | ||||
| -rw-r--r-- | keyboards/k_type/is31fl3733.c | 231 | ||||
| -rw-r--r-- | keyboards/k_type/is31fl3733.h | 251 | ||||
| -rw-r--r-- | keyboards/k_type/k_type.c | 201 | ||||
| -rw-r--r-- | keyboards/k_type/keymaps/andrew-fahmy/config.h | 52 | ||||
| -rw-r--r-- | keyboards/k_type/keymaps/andrew-fahmy/keymap.c | 60 | ||||
| -rw-r--r-- | keyboards/k_type/keymaps/andrew-fahmy/rules.mk | 1 | ||||
| -rw-r--r-- | keyboards/k_type/keymaps/rgb/config.h | 25 | ||||
| -rw-r--r-- | keyboards/k_type/keymaps/rgb/keymap.c | 4 | ||||
| -rw-r--r-- | keyboards/k_type/keymaps/rgb/readme.md | 4 | ||||
| -rw-r--r-- | keyboards/k_type/led.c | 53 | ||||
| -rw-r--r-- | keyboards/k_type/mcuconf.h | 3 | ||||
| -rw-r--r-- | keyboards/k_type/rules.mk | 4 |
14 files changed, 103 insertions, 1058 deletions
diff --git a/keyboards/k_type/i2c_master.c b/keyboards/k_type/i2c_master.c deleted file mode 100644 index 72d835a604..0000000000 --- a/keyboards/k_type/i2c_master.c +++ /dev/null @@ -1,145 +0,0 @@ -/* Copyright 2018 Jack Humbert - * Copyright 2018 Yiancar - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -/* This library is only valid for STM32 processors. - * This library follows the convention of the AVR i2c_master library. - * As a result addresses are expected to be already shifted (addr << 1). - * I2CD1 is the default driver which corresponds to pins B6 and B7. This - * can be changed. - * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that - * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used - * but using any other I2C pins should be trivial. - */ -#include "quantum.h" -#include "i2c_master.h" -#include "print.h" -#include <string.h> -#include <hal.h> - -static uint8_t i2c_address; - -I2CDriver *drivers[I2C_COUNT]; - -static const I2CConfig i2cconfig = { -#if defined(USE_I2CV1_CONTRIB) - I2C1_CLOCK_SPEED, -#elif defined(USE_I2CV1) - I2C1_OPMODE, - I2C1_CLOCK_SPEED, - I2C1_DUTY_CYCLE, -#else - // This configures the I2C clock to 400khz assuming a 72Mhz clock - // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html - STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) | STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) | STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH) | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL), 0, 0 -#endif -}; - -static i2c_status_t chibios_to_qmk(const msg_t* status) { - switch (*status) { - case I2C_NO_ERROR: - return I2C_STATUS_SUCCESS; - case I2C_TIMEOUT: - return I2C_STATUS_TIMEOUT; - // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT - default: - return I2C_STATUS_ERROR; - } -} - -__attribute__((weak)) void i2c_init(I2CDriver *driver, ioportid_t scl_port, ioportid_t sda_port, iopadid_t scl_pad, iopadid_t sda_pad) { - static uint8_t index = 0; - if (index < I2C_COUNT) { - - // Try releasing special pins for a short time - palSetPadMode(scl_port, scl_pad, PAL_MODE_INPUT); - palSetPadMode(sda_port, sda_pad, PAL_MODE_INPUT); - - chThdSleepMilliseconds(10); - -#if defined(USE_GPIOV1) - palSetPadMode(scl_port, scl_pad, I2C1_SCL_PAL_MODE); - palSetPadMode(sda_port, sda_pad, I2C1_SDA_PAL_MODE); -#else - palSetPadMode(scl_port, scl_pad, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); - palSetPadMode(sda_port, sda_pad, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); -#endif - - drivers[index++] = driver; - } -} - -i2c_status_t i2c_start(uint8_t index, uint8_t address) { - if(index >= I2C_COUNT) { - return I2C_STATUS_ERROR; - } - i2c_address = address; - i2cStart(drivers[index], &i2cconfig); - return I2C_STATUS_SUCCESS; -} - -i2c_status_t i2c_transmit(uint8_t index, uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) { - if(index >= I2C_COUNT) { - return I2C_STATUS_ERROR; - } - i2c_address = address; - i2cStart(drivers[index], &i2cconfig); - msg_t status = i2cMasterTransmitTimeout(drivers[index], (i2c_address >> 1), data, length, 0, 0, TIME_MS2I(timeout)); - return chibios_to_qmk(&status); -} - -i2c_status_t i2c_receive(uint8_t index, uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) { - if(index >= I2C_COUNT) { - return I2C_STATUS_ERROR; - } - i2c_address = address; - i2cStart(drivers[index], &i2cconfig); - msg_t status = i2cMasterReceiveTimeout(drivers[index], (i2c_address >> 1), data, length, TIME_MS2I(timeout)); - return chibios_to_qmk(&status); -} - -i2c_status_t i2c_writeReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) { - if(index >= I2C_COUNT) { - return I2C_STATUS_ERROR; - } - i2c_address = devaddr; - i2cStart(drivers[index], &i2cconfig); - - uint8_t complete_packet[length + 1]; - for (uint8_t i = 0; i < length; i++) { - complete_packet[i + 1] = data[i]; - } - complete_packet[0] = regaddr; - - msg_t status = i2cMasterTransmitTimeout(drivers[index], (i2c_address >> 1), complete_packet, length + 1, 0, 0, TIME_MS2I(timeout)); - return chibios_to_qmk(&status); -} - -i2c_status_t i2c_readReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) { - if(index >= I2C_COUNT) { - return I2C_STATUS_ERROR; - } - i2c_address = devaddr; - i2cStart(drivers[index], &i2cconfig); - msg_t status = i2cMasterTransmitTimeout(drivers[index], (i2c_address >> 1), ®addr, 1, data, length, TIME_MS2I(timeout)); - return chibios_to_qmk(&status); -} - -void i2c_stop(uint8_t index) { - if(index < I2C_COUNT) { - i2cStop(drivers[index]); - } -} diff --git a/keyboards/k_type/i2c_master.h b/keyboards/k_type/i2c_master.h deleted file mode 100644 index 5a7893fae8..0000000000 --- a/keyboards/k_type/i2c_master.h +++ /dev/null @@ -1,127 +0,0 @@ -/* Copyright 2018 Jack Humbert - * Copyright 2018 Yiancar - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -/* This library follows the convention of the AVR i2c_master library. - * As a result addresses are expected to be already shifted (addr << 1). - * I2CD1 is the default driver which corresponds to pins B6 and B7. This - * can be changed. - * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that - * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. - */ -#pragma once - -#include <ch.h> -#include <hal.h> - -#ifndef I2C_COUNT -# define I2C_COUNT 1 -#endif - -#ifdef I2C1_BANK -# define I2C1_SCL_BANK I2C1_BANK -# define I2C1_SDA_BANK I2C1_BANK -#endif - -#ifndef I2C1_SCL_BANK -# define I2C1_SCL_BANK GPIOB -#endif - -#ifndef I2C1_SDA_BANK -# define I2C1_SDA_BANK GPIOB -#endif - - -#ifdef USE_I2C2 -# ifdef I2C2_BANK -# define I2C2_SCL_BANK I2C2_BANK -# define I2C2_SDA_BANK I2C2_BANK -# endif -# ifndef I2C2_SCL_BANK -# define I2C2_SCL_BANK GPIOC -# endif -# ifndef I2C2_SDA_BANK -# define I2C2_SDA_BANK GPIOC -# endif -#endif - -#ifndef I2C1_SCL -# define I2C1_SCL 6 -#endif -#ifndef I2C1_SDA -# define I2C1_SDA 7 -#endif - -#ifdef USE_I2CV1 -# ifndef I2C1_OPMODE -# define I2C1_OPMODE OPMODE_I2C -# endif -# ifndef I2C1_CLOCK_SPEED -# define I2C1_CLOCK_SPEED 100000 /* 400000 */ -# endif -# ifndef I2C1_DUTY_CYCLE -# define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */ -# endif -#else -// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock -// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html -# ifndef I2C1_TIMINGR_PRESC -# define I2C1_TIMINGR_PRESC 0U -# endif -# ifndef I2C1_TIMINGR_SCLDEL -# define I2C1_TIMINGR_SCLDEL 7U -# endif -# ifndef I2C1_TIMINGR_SDADEL -# define I2C1_TIMINGR_SDADEL 0U -# endif -# ifndef I2C1_TIMINGR_SCLH -# define I2C1_TIMINGR_SCLH 38U -# endif -# ifndef I2C1_TIMINGR_SCLL -# define I2C1_TIMINGR_SCLL 129U -# endif -#endif - -#ifdef USE_GPIOV1 -# ifndef I2C1_SCL_PAL_MODE -# define I2C1_SCL_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN -# endif -# ifndef I2C1_SDA_PAL_MODE -# define I2C1_SDA_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN -# endif -#else -// The default PAL alternate modes are used to signal that the pins are used for I2C -# ifndef I2C1_SCL_PAL_MODE -# define I2C1_SCL_PAL_MODE 4 -# endif -# ifndef I2C1_SDA_PAL_MODE -# define I2C1_SDA_PAL_MODE 4 -# endif -#endif - -typedef int16_t i2c_status_t; - -#define I2C_STATUS_SUCCESS (0) -#define I2C_STATUS_ERROR (-1) -#define I2C_STATUS_TIMEOUT (-2) - -void i2c_init(I2CDriver *driver, ioportid_t scl_port, ioportid_t sda_port, iopadid_t scl_pad, iopadid_t sda_pad); -i2c_status_t i2c_start(uint8_t index, uint8_t address); -i2c_status_t i2c_transmit(uint8_t index, uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout); -i2c_status_t i2c_receive(uint8_t index, uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); -i2c_status_t i2c_writeReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout); -i2c_status_t i2c_readReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout); -void i2c_stop(uint8_t index); diff --git a/keyboards/k_type/is31fl3733.c b/keyboards/k_type/is31fl3733.c deleted file mode 100644 index 8818a622bc..0000000000 --- a/keyboards/k_type/is31fl3733.c +++ /dev/null @@ -1,231 +0,0 @@ -/* Copyright 2017 Jason Williams - * Copyright 2018 Jack Humbert - * Copyright 2018 Yiancar - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "is31fl3733.h" -#include "i2c_master.h" -#include "wait.h" - -// This is a 7-bit address, that gets left-shifted and bit 0 -// set to 0 for write, 1 for read (as per I2C protocol) -// The address will vary depending on your wiring: -// 00 <-> GND -// 01 <-> SCL -// 10 <-> SDA -// 11 <-> VCC -// ADDR1 represents A1:A0 of the 7-bit address. -// ADDR2 represents A3:A2 of the 7-bit address. -// The result is: 0b101(ADDR2)(ADDR1) -#define ISSI_ADDR_DEFAULT 0x50 - -#define ISSI_COMMANDREGISTER 0xFD -#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE -#define ISSI_INTERRUPTMASKREGISTER 0xF0 -#define ISSI_INTERRUPTSTATUSREGISTER 0xF1 - -#define ISSI_PAGE_LEDCONTROL 0x00 // PG0 -#define ISSI_PAGE_PWM 0x01 // PG1 -#define ISSI_PAGE_AUTOBREATH 0x02 // PG2 -#define ISSI_PAGE_FUNCTION 0x03 // PG3 - -#define ISSI_REG_CONFIGURATION 0x00 // PG3 -#define ISSI_REG_GLOBALCURRENT 0x01 // PG3 -#define ISSI_REG_RESET 0x11 // PG3 -#define ISSI_REG_SWPULLUP 0x0F // PG3 -#define ISSI_REG_CSPULLUP 0x10 // PG3 - -#ifndef ISSI_TIMEOUT -# define ISSI_TIMEOUT 100 -#endif - -#ifndef ISSI_PERSISTENCE -# define ISSI_PERSISTENCE 0 -#endif - -// Transfer buffer for TWITransmitData() -uint8_t g_twi_transfer_buffer[20]; - -// These buffers match the IS31FL3733 PWM registers. -// The control buffers match the PG0 LED On/Off registers. -// Storing them like this is optimal for I2C transfers to the registers. -// We could optimize this and take out the unused registers from these -// buffers and the transfers in IS31FL3733_write_pwm_buffer() but it's -// probably not worth the extra complexity. -uint8_t g_pwm_buffer[DRIVER_COUNT][192]; -bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false}; - -uint8_t g_led_control_registers[DRIVER_COUNT][24] = {{0}, {0}}; -bool g_led_control_registers_update_required[DRIVER_COUNT] = {false}; - -bool IS31FL3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t data) { - // If the transaction fails function returns false. - g_twi_transfer_buffer[0] = reg; - g_twi_transfer_buffer[1] = data; - -#if ISSI_PERSISTENCE > 0 - for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) { - if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) { - return false; - } - } -#else - if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) { - return false; - } -#endif - return true; -} - -bool IS31FL3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffer) { - // Assumes PG1 is already selected. - // If any of the transactions fails function returns false. - // Transmit PWM registers in 12 transfers of 16 bytes. - // g_twi_transfer_buffer[] is 20 bytes - - // Iterate over the pwm_buffer contents at 16 byte intervals. - for (int i = 0; i < 192; i += 16) { - g_twi_transfer_buffer[0] = i; - // Copy the data from i to i+15. - // Device will auto-increment register for data after the first byte - // Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer. - for (int j = 0; j < 16; j++) { - g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j]; - } - -#if ISSI_PERSISTENCE > 0 - for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) { - if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) { - return false; - } - } -#else - if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) { - return false; - } -#endif - } - return true; -} - -void IS31FL3733_init(uint8_t bus, uint8_t addr, uint8_t sync) { - // In order to avoid the LEDs being driven with garbage data - // in the LED driver's PWM registers, shutdown is enabled last. - // Set up the mode and other settings, clear the PWM registers, - // then disable software shutdown. - // Sync is passed so set it according to the datasheet. - - // Unlock the command register. - IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); - // Select PG0 - IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL); - // Turn off all LEDs. - for (int i = 0x00; i <= 0x17; i++) { - IS31FL3733_write_register(bus, addr, i, 0x00); - } - // Unlock the command register. - IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); - // Select PG1 - IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM); - // Set PWM on all LEDs to 0 - // No need to setup Breath registers to PWM as that is the default. - for (int i = 0x00; i <= 0xBF; i++) { - IS31FL3733_write_register(bus, addr, i, 0x00); - } - // Unlock the command register. - IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); - // Select PG3 - IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION); - // Set global current to maximum. - IS31FL3733_write_register(bus, addr, ISSI_REG_GLOBALCURRENT, 0xFF); - // Disable software shutdown. - IS31FL3733_write_register(bus, addr, ISSI_REG_CONFIGURATION, (sync << 6) | 0x01); - // Wait 10ms to ensure the device has woken up. - wait_ms(10); -} - -void IS31FL3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { - if (index >= 0 && index < DRIVER_LED_TOTAL) { - is31_led led = g_is31_leds[index]; - - g_pwm_buffer[led.driver][led.r] = red; - g_pwm_buffer[led.driver][led.g] = green; - g_pwm_buffer[led.driver][led.b] = blue; - g_pwm_buffer_update_required[led.driver] = true; - } -} - -void IS31FL3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue) { - for (int i = 0; i < DRIVER_LED_TOTAL; i++) { - IS31FL3733_set_color(i, red, green, blue); - } -} - -void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue) { - is31_led led = g_is31_leds[index]; - - uint8_t control_register_r = led.r / 8; - uint8_t control_register_g = led.g / 8; - uint8_t control_register_b = led.b / 8; - uint8_t bit_r = led.r % 8; - uint8_t bit_g = led.g % 8; - uint8_t bit_b = led.b % 8; - - if (red) { - g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r); - } else { - g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r); - } - if (green) { - g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g); - } else { - g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g); - } - if (blue) { - g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b); - } else { - g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b); - } - - g_led_control_registers_update_required[led.driver] = true; -} - -void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index) { - if (g_pwm_buffer_update_required[index]) { - // Firstly we need to unlock the command register and select PG1. - IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); - IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM); - - // If any of the transactions fail we risk writing dirty PG0, - // refresh page 0 just in case. - if (!IS31FL3733_write_pwm_buffer(index, addr, g_pwm_buffer[index])) { - g_led_control_registers_update_required[index] = true; - } - } - g_pwm_buffer_update_required[index] = false; -} - -void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index) { - if (g_led_control_registers_update_required[index]) { - // Firstly we need to unlock the command register and select PG0 - IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); - IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL); - for (int i = 0; i < 24; i++) { - IS31FL3733_write_register(index, addr, i, g_led_control_registers[index][i]); - } - } - g_led_control_registers_update_required[index] = false; -} diff --git a/keyboards/k_type/is31fl3733.h b/keyboards/k_type/is31fl3733.h deleted file mode 100644 index 272bcdc417..0000000000 --- a/keyboards/k_type/is31fl3733.h +++ /dev/null @@ -1,251 +0,0 @@ -/* Copyright 2017 Jason Williams - * Copyright 2018 Jack Humbert - * Copyright 2018 Yiancar - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include <stdint.h> -#include <stdbool.h> - -typedef struct is31_led { - uint8_t driver : 2; - uint8_t r; - uint8_t g; - uint8_t b; -} __attribute__((packed)) is31_led; - -extern const is31_led g_is31_leds[DRIVER_LED_TOTAL]; - -void IS31FL3733_init(uint8_t bus, uint8_t addr, uint8_t sync); -bool IS31FL3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t data); -bool IS31FL3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffer); - -void IS31FL3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue); -void IS31FL3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue); - -void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue); - -// This should not be called from an interrupt -// (eg. from a timer interrupt). -// Call this while idle (in between matrix scans). -// If the buffer is dirty, it will update the driver with the buffer. -void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index); // index is the driver index -void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index); - -#define A_1 0x00 -#define A_2 0x01 -#define A_3 0x02 -#define A_4 0x03 -#define A_5 0x04 -#define A_6 0x05 -#define A_7 0x06 -#define A_8 0x07 -#define A_9 0x08 -#define A_10 0x09 -#define A_11 0x0A -#define A_12 0x0B -#define A_13 0x0C -#define A_14 0x0D -#define A_15 0x0E -#define A_16 0x0F - -#define B_1 0x10 -#define B_2 0x11 -#define B_3 0x12 -#define B_4 0x13 -#define B_5 0x14 -#define B_6 0x15 -#define B_7 0x16 -#define B_8 0x17 -#define B_9 0x18 -#define B_10 0x19 -#define B_11 0x1A -#define B_12 0x1B -#define B_13 0x1C -#define B_14 0x1D -#define B_15 0x1E -#define B_16 0x1F - -#define C_1 0x20 -#define C_2 0x21 -#define C_3 0x22 -#define C_4 0x23 -#define C_5 0x24 -#define C_6 0x25 -#define C_7 0x26 -#define C_8 0x27 -#define C_9 0x28 -#define C_10 0x29 -#define C_11 0x2A -#define C_12 0x2B -#define C_13 0x2C -#define C_14 0x2D -#define C_15 0x2E -#define C_16 0x2F - -#define D_1 0x30 -#define D_2 0x31 -#define D_3 0x32 -#define D_4 0x33 -#define D_5 0x34 -#define D_6 0x35 -#define D_7 0x36 -#define D_8 0x37 -#define D_9 0x38 -#define D_10 0x39 -#define D_11 0x3A -#define D_12 0x3B -#define D_13 0x3C -#define D_14 0x3D -#define D_15 0x3E -#define D_16 0x3F - -#define E_1 0x40 -#define E_2 0x41 -#define E_3 0x42 -#define E_4 0x43 -#define E_5 0x44 -#define E_6 0x45 -#define E_7 0x46 -#define E_8 0x47 -#define E_9 0x48 -#define E_10 0x49 -#define E_11 0x4A -#define E_12 0x4B -#define E_13 0x4C -#define E_14 0x4D -#define E_15 0x4E -#define E_16 0x4F - -#define F_1 0x50 -#define F_2 0x51 -#define F_3 0x52 -#define F_4 0x53 -#define F_5 0x54 -#define F_6 0x55 -#define F_7 0x56 -#define F_8 0x57 -#define F_9 0x58 -#define F_10 0x59 -#define F_11 0x5A -#define F_12 0x5B -#define F_13 0x5C -#define F_14 0x5D -#define F_15 0x5E -#define F_16 0x5F - -#define G_1 0x60 -#define G_2 0x61 -#define G_3 0x62 -#define G_4 0x63 -#define G_5 0x64 -#define G_6 0x65 -#define G_7 0x66 -#define G_8 0x67 -#define G_9 0x68 -#define G_10 0x69 -#define G_11 0x6A -#define G_12 0x6B -#define G_13 0x6C -#define G_14 0x6D -#define G_15 0x6E -#define G_16 0x6F - -#define H_1 0x70 -#define H_2 0x71 -#define H_3 0x72 -#define H_4 0x73 -#define H_5 0x74 -#define H_6 0x75 -#define H_7 0x76 -#define H_8 0x77 -#define H_9 0x78 -#define H_10 0x79 -#define H_11 0x7A -#define H_12 0x7B -#define H_13 0x7C -#define H_14 0x7D -#define H_15 0x7E -#define H_16 0x7F - -#define I_1 0x80 -#define I_2 0x81 -#define I_3 0x82 -#define I_4 0x83 -#define I_5 0x84 -#define I_6 0x85 -#define I_7 0x86 -#define I_8 0x87 -#define I_9 0x88 -#define I_10 0x89 -#define I_11 0x8A -#define I_12 0x8B -#define I_13 0x8C -#define I_14 0x8D -#define I_15 0x8E -#define I_16 0x8F - -#define J_1 0x90 -#define J_2 0x91 -#define J_3 0x92 -#define J_4 0x93 -#define J_5 0x94 -#define J_6 0x95 -#define J_7 0x96 -#define J_8 0x97 -#define J_9 0x98 -#define J_10 0x99 -#define J_11 0x9A -#define J_12 0x9B -#define J_13 0x9C -#define J_14 0x9D -#define J_15 0x9E -#define J_16 0x9F - -#define K_1 0xA0 -#define K_2 0xA1 -#define K_3 0xA2 -#define K_4 0xA3 -#define K_5 0xA4 -#define K_6 0xA5 -#define K_7 0xA6 -#define K_8 0xA7 -#define K_9 0xA8 -#define K_10 0xA9 -#define K_11 0xAA -#define K_12 0xAB -#define K_13 0xAC -#define K_14 0xAD -#define K_15 0xAE -#define K_16 0xAF - -#define L_1 0xB0 -#define L_2 0xB1 -#define L_3 0xB2 -#define L_4 0xB3 -#define L_5 0xB4 -#define L_6 0xB5 -#define L_7 0xB6 -#define L_8 0xB7 -#define L_9 0xB8 -#define L_10 0xB9 -#define L_11 0xBA -#define L_12 0xBB -#define L_13 0xBC -#define L_14 0xBD -#define L_15 0xBE -#define L_16 0xBF diff --git a/keyboards/k_type/k_type.c b/keyboards/k_type/k_type.c index 567ad28430..ae62f0e723 100644 --- a/keyboards/k_type/k_type.c +++ b/keyboards/k_type/k_type.c @@ -17,8 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "k_type.h" -#include "is31fl3733.h" - #ifdef RGB_MATRIX_ENABLE const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { { 0, B_1, A_1, C_1 }, @@ -47,11 +45,11 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { { 0, E_7, D_7, F_7 }, { 0, E_8, D_8, F_8 }, { 0, E_9, D_9, F_9 }, - { 0, E_10, D_10, F_10 }, - { 0, E_11, D_11, F_11 }, - { 0, E_12, D_12, F_12 }, - { 0, E_13, D_13, F_13 }, - { 0, E_14, D_14, F_14 }, + { 0, E_10, D_1, F_10 }, + { 0, E_11, D_1, F_11 }, + { 0, E_12, D_1, F_12 }, + { 0, E_13, D_1, F_13 }, + { 0, E_14, D_1, F_14 }, { 0, E_15, D_15, F_15 }, { 0, E_16, D_16, F_16 }, @@ -64,11 +62,11 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { { 0, H_7, G_7, I_7 }, { 0, H_8, G_8, I_8 }, { 0, H_9, G_9, I_9 }, - { 0, H_10, G_10, I_10 }, - { 0, H_11, G_11, I_11 }, - { 0, H_12, G_12, I_12 }, - { 0, H_13, G_13, I_13 }, - { 0, H_14, G_14, I_14 }, + { 0, H_10, G_1, I_10 }, + { 0, H_11, G_1, I_11 }, + { 0, H_12, G_1, I_12 }, + { 0, H_13, G_1, I_13 }, + { 0, H_14, G_1, I_14 }, { 0, H_15, G_15, I_15 }, { 0, H_16, G_16, I_16 }, @@ -81,123 +79,106 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { { 0, K_7, J_7, L_7 }, { 0, K_8, J_8, L_8 }, { 0, K_9, J_9, L_9 }, - { 0, K_10, J_10, L_10 }, - { 0, K_11, J_11, L_11 }, - { 0, K_12, J_12, L_12 }, - { 0, K_13, J_13, L_13 }, - { 0, K_14, J_14, L_14 }, + { 0, K_10, J_1, L_10 }, + { 0, K_11, J_1, L_11 }, + { 0, K_12, J_1, L_12 }, + { 0, K_13, J_1, L_13 }, + { 0, K_14, J_1, L_14 }, { 0, K_15, J_15, L_15 }, { 0, K_16, J_16, L_16 }, // Driver 2 is on I2C2 - currently not usable with i2c_master - { 1, B_1, A_1, C_1 }, - { 1, B_2, A_2, C_2 }, - { 1, B_3, A_3, C_3 }, - { 1, B_4, A_4, C_4 }, - { 1, B_5, A_5, C_5 }, - { 1, B_6, A_6, C_6 }, - { 1, B_7, A_7, C_7 }, - { 1, B_8, A_8, C_8 }, - { 1, B_9, A_9, C_9 }, - { 1, B_10, A_10, C_10 }, - { 1, B_11, A_11, C_11 }, - { 1, B_12, A_12, C_12 }, - { 1, B_13, A_13, C_13 }, - { 1, B_14, A_14, C_14 }, - { 1, B_15, A_15, C_15 }, - { 1, B_16, A_16, C_16 }, - - { 1, E_1, D_1, F_1 }, - { 1, E_2, D_2, F_2 }, - { 1, E_3, D_3, F_3 }, - { 1, E_4, D_4, F_4 }, - { 1, E_5, D_5, F_5 }, - { 1, E_6, D_6, F_6 }, - { 1, E_7, D_7, F_7 }, - { 1, E_8, D_8, F_8 }, - { 1, E_9, D_9, F_9 }, - { 1, E_10, D_10, F_10 }, - { 1, E_11, D_11, F_11 }, - { 1, E_12, D_12, F_12 }, - { 1, E_13, D_13, F_13 }, - { 1, E_14, D_14, F_14 }, - { 1, E_15, D_15, F_15 }, - { 1, E_16, D_16, F_16 }, - - { 1, H_1, G_1, I_1 }, - { 1, H_2, G_2, I_2 }, - { 1, H_3, G_3, I_3 }, - { 1, H_4, G_4, I_4 }, - { 1, H_5, G_5, I_5 }, - { 1, H_6, G_6, I_6 }, - { 1, H_7, G_7, I_7 }, - { 1, H_8, G_8, I_8 }, - { 1, H_9, G_9, I_9 }, - { 1, H_10, G_10, I_10 }, - { 1, H_11, G_11, I_11 }, - { 1, H_12, G_12, I_12 }, - { 1, H_13, G_13, I_13 }, - { 1, H_14, G_14, I_14 }, - { 1, H_15, G_15, I_15 }, - { 1, H_16, G_16, I_16 }, - - { 1, K_1, J_1, L_1 }, - { 1, K_2, J_2, L_2 }, - { 1, K_3, J_3, L_3 }, - { 1, K_4, J_4, L_4 }, - { 1, K_5, J_5, L_5 }, - { 1, K_6, J_6, L_6 }, - { 1, K_7, J_7, L_7 } + //{ 1, B_1, A_1, C_1 }, + //{ 1, B_2, A_2, C_2 }, + //{ 1, B_3, A_3, C_3 }, + //{ 1, B_4, A_4, C_4 }, + //{ 1, B_5, A_5, C_5 }, + //{ 1, B_6, A_6, C_6 }, + //{ 1, B_7, A_7, C_7 }, + //{ 1, B_8, A_8, C_8 }, + //{ 1, B_9, A_9, C_9 }, + //{ 1, B_10, A_10, C_10 }, + //{ 1, B_11, A_11, C_11 }, + //{ 1, B_12, A_12, C_12 }, + //{ 1, B_13, A_13, C_13 }, + //{ 1, B_14, A_14, C_14 }, + //{ 1, B_15, A_15, C_15 }, + //{ 1, B_16, A_16, C_16 }, + + //{ 1, E_1, D_1, F_1 }, + //{ 1, E_2, D_2, F_2 }, + //{ 1, E_3, D_3, F_3 }, + //{ 1, E_4, D_4, F_4 }, + //{ 1, E_5, D_5, F_5 }, + //{ 1, E_6, D_6, F_6 }, + //{ 1, E_7, D_7, F_7 }, + //{ 1, E_8, D_8, F_8 }, + //{ 1, E_9, D_9, F_9 }, + //{ 1, E_10, D_1, F_10 }, + //{ 1, E_11, D_1, F_11 }, + //{ 1, E_12, D_1, F_12 }, + //{ 1, E_13, D_1, F_13 }, + //{ 1, E_14, D_1, F_14 }, + //{ 1, E_15, D_15, F_15 }, + //{ 1, E_16, D_16, F_16 }, + + //{ 1, H_1, G_1, I_1 }, + //{ 1, H_2, G_2, I_2 }, + //{ 1, H_3, G_3, I_3 }, + //{ 1, H_4, G_4, I_4 }, + //{ 1, H_5, G_5, I_5 }, + //{ 1, H_6, G_6, I_6 }, + //{ 1, H_7, G_7, I_7 }, + //{ 1, H_8, G_8, I_8 }, + //{ 1, H_9, G_9, I_9 }, + //{ 1, H_10, G_1, I_10 }, + //{ 1, H_11, G_1, I_11 }, + //{ 1, H_12, G_1, I_12 }, + //{ 1, H_13, G_1, I_13 }, + //{ 1, H_14, G_1, I_14 }, + //{ 1, H_15, G_15, I_15 }, + //{ 1, H_16, G_16, I_16 }, + + //{ 1, K_1, J_1, L_1 }, + //{ 1, K_2, J_2, L_2 }, + //{ 1, K_3, J_3, L_3 }, + //{ 1, K_4, J_4, L_4 }, + //{ 1, K_5, J_5, L_5 }, + //{ 1, K_6, J_6, L_6 }, + //{ 1, K_7, J_7, L_7 } }; led_config_t g_led_config = { { // Key Matrix to LED Index - { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 }, - { 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 }, - { 20, 21, 22, 23, 24, 25, 26, 27, 28, NO_LED }, - { 29, NO_LED, 30, 31, 32, 33, 34, 35, 36, 37 }, - { 38, 39, 40, 41, 42, 43, 44, 45, 46, NO_LED }, - { 47, 48, 49, 50, 51, 52, 53, 54, 55, 56 }, - { 57, 58, 59, 60, 61, NO_LED, 62, NO_LED, 63, NO_LED }, - { 64, 65, 66, 67, 68, 69, 70, 71, 72, 73 }, - { NO_LED, 74, NO_LED, 75, 76, 77, 78, 79, 80, 81 }, - { 82, 83, 84, 85, 86, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED } + { 0, 10, 20, 29, 38, 47, 57, NO_LED, NO_LED, NO_LED }, + { 1, 11, 21, NO_LED, 39, 48, 58, NO_LED, NO_LED, NO_LED }, + { 2, 12, 22, 30, 40, 49, 59, NO_LED, NO_LED, NO_LED }, + { 3, 13, 23, 31, 41, 50, 60, NO_LED, NO_LED, NO_LED }, + { 4, 14, 24, 32, 42, 51, 61, NO_LED, NO_LED, NO_LED }, + { 5, 15, 25, 33, 43, 52, NO_LED, NO_LED, NO_LED, NO_LED }, + { 6, 16, 26, 34, 44, 53, 62, NO_LED, NO_LED, NO_LED }, + { 7, 17, 27, 35, 45, 54, NO_LED, NO_LED, NO_LED, NO_LED }, + { 8, 18, 28, 36, 46, 55, 63, NO_LED, NO_LED, NO_LED }, + { 9, 19, NO_LED, 37, NO_LED, 56, NO_LED, NO_LED, NO_LED, NO_LED } }, { // LED Index to Physical Position - // Key LED { 0, 0 }, { 26.35, 0 }, { 39.53, 0 }, { 52.71, 0 }, { 65.88, 0 }, { 79.06, 0 }, { 92.24, 0 }, { 105.41, 0 }, { 118.59, 0 }, { 131.77, 0 }, { 144.94, 0 }, { 158.12, 0 }, { 171.29, 0 }, { 197.65, 0 }, { 210.82, 0 }, { 224, 0 }, { 0, 21.33 }, { 13.18, 21.33 }, { 26.35, 21.33 }, { 39.53, 21.33 }, { 52.71, 21.33 }, { 65.88, 21.33 }, { 79.06, 21.33 }, { 92.24, 21.33 }, { |