diff options
9 files changed, 298 insertions, 0 deletions
diff --git a/keyboards/wilba_tech/rama_works_kara/config.h b/keyboards/wilba_tech/rama_works_kara/config.h new file mode 100644 index 0000000000..724098257b --- /dev/null +++ b/keyboards/wilba_tech/rama_works_kara/config.h @@ -0,0 +1,123 @@ +/* Copyright 2021 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "config_common.h" + +// USB Device descriptor parameter +#define VENDOR_ID 0x5241 // "RA" +#define PRODUCT_ID 0x4B52 // "KR" +#define DEVICE_VER 0x0001 +#define MANUFACTURER RAMA WORKS +#define PRODUCT RAMA WORKS KARA + +// key matrix size +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +// M60-A PCB default pin-out +#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } +#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } +#define UNUSED_PINS + +// IS31FL3731 driver +#define DRIVER_COUNT 2 +#define DRIVER_LED_TOTAL 72 + +// COL2ROW or ROW2COL +#define DIODE_DIRECTION COL2ROW + +// Set 0 if debouncing isn't needed +#define DEBOUNCE 5 + +// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap +#define LOCKING_SUPPORT_ENABLE +// Locking resynchronize hack +#define LOCKING_RESYNC_ENABLE + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +// disable debug print +//#define NO_DEBUG + +// disable print +//#define NO_PRINT + +// disable action features +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#define RGB_BACKLIGHT_ENABLED 1 + +// This conditionally compiles the backlight code for M60-A specifics +#define RGB_BACKLIGHT_M60_A + +// enable/disable LEDs based on layout +// they aren't really used if RGB_BACKLIGHT_M60_A defined +#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1 +#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 +#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1 +#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1 +#define RGB_BACKLIGHT_USE_ISO_ENTER 0 +#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 1 + +// disable backlight when USB suspended (PC sleep/hibernate/shutdown) +#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0 + +// disable backlight after timeout in minutes, 0 = no timeout +#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 + +// the default brightness +#define RGB_BACKLIGHT_BRIGHTNESS 255 + +// the default effect (RGB test) +#define RGB_BACKLIGHT_EFFECT 255 + +// the default effect speed (0-3) +#define RGB_BACKLIGHT_EFFECT_SPEED 0 + +// the default color1 and color2 +#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } +#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } + +// These define which keys in the matrix are alphas/mods +// Used for backlight effects so colors are different for +// alphas vs. mods +// Each value is for a row, bit 0 is column 0 +// Alpha=0 Mod=1 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0010000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001 +#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011100000000111 + +#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } +#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } + +// Backlight config starts after VIA's EEPROM usage, +// dynamic keymaps start after this. +#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31 + +// VIA lighting is handled by the keyboard-level code +#define VIA_CUSTOM_LIGHTING_ENABLE diff --git a/keyboards/wilba_tech/rama_works_kara/info.json b/keyboards/wilba_tech/rama_works_kara/info.json new file mode 100644 index 0000000000..c064f9c298 --- /dev/null +++ b/keyboards/wilba_tech/rama_works_kara/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "RAMA WORKS KARA", + "url": "http://rama.works", + "maintainer": "Wilba", + "width": 15, + "height": 5, + "layouts": { + "LAYOUT_60_hhkb": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}] + } + } +}
\ No newline at end of file diff --git a/keyboards/wilba_tech/rama_works_kara/keymaps/default/keymap.c b/keyboards/wilba_tech/rama_works_kara/keymaps/default/keymap.c new file mode 100644 index 0000000000..15f654de0c --- /dev/null +++ b/keyboards/wilba_tech/rama_works_kara/keymaps/default/keymap.c @@ -0,0 +1,55 @@ +/* Copyright 2021 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +// Default layout for RAMA WORKS KARA +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + // Default layer + [0] = LAYOUT_60_hhkb( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, FN_MO13, + KC_LGUI, KC_LALT, KC_SPC, KC_RALT, FN_MO23), + + // Fn1 Layer + [1] = LAYOUT_60_hhkb( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + // Fn2 Layer + [2] = LAYOUT_60_hhkb( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + // Fn3 Layer + [3] = LAYOUT_60_hhkb( + KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +}; + + diff --git a/keyboards/wilba_tech/rama_works_kara/keymaps/via/keymap.c b/keyboards/wilba_tech/rama_works_kara/keymaps/via/keymap.c new file mode 100644 index 0000000000..1f9d213f05 --- /dev/null +++ b/keyboards/wilba_tech/rama_works_kara/keymaps/via/keymap.c @@ -0,0 +1 @@ +#include "../default/keymap.c"
\ No newline at end of file diff --git a/keyboards/wilba_tech/rama_works_kara/keymaps/via/rules.mk b/keyboards/wilba_tech/rama_works_kara/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/wilba_tech/rama_works_kara/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/wilba_tech/rama_works_kara/rama_works_kara.c b/keyboards/wilba_tech/rama_works_kara/rama_works_kara.c new file mode 100644 index 0000000000..787a854925 --- /dev/null +++ b/keyboards/wilba_tech/rama_works_kara/rama_works_kara.c @@ -0,0 +1,18 @@ +/* Copyright 2021 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef RGB_BACKLIGHT_M60_A +#error RGB_BACKLIGHT_M60_A not defined +#endif diff --git a/keyboards/wilba_tech/rama_works_kara/rama_works_kara.h b/keyboards/wilba_tech/rama_works_kara/rama_works_kara.h new file mode 100644 index 0000000000..c3e06f8521 --- /dev/null +++ b/keyboards/wilba_tech/rama_works_kara/rama_works_kara.h @@ -0,0 +1,37 @@ +/* Copyright 2021 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" +#include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h" +#include "via.h" + +#define XXX KC_NO + +#define LAYOUT_60_hhkb( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K41, K42, K47, K4B, K4C \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { XXX, K41, K42, XXX, XXX, XXX, XXX, K47, XXX, XXX, XXX, K4B, K4C, XXX } \ +} + diff --git a/keyboards/wilba_tech/rama_works_kara/readme.md b/keyboards/wilba_tech/rama_works_kara/readme.md new file mode 100644 index 0000000000..967cfd5e7f --- /dev/null +++ b/keyboards/wilba_tech/rama_works_kara/readme.md @@ -0,0 +1,13 @@ +# RAMA WORKS KARA + +KARA is a keyboard PCB supporting HHKB layout and daughterboard USB-C. [More info at RAMA WORKS](https://rama.works/kara/) + +* Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582) +* Hardware Supported: RAMA WORKS KARA PCB +* Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/) + +Make example for this keyboard (after setting up your build environment): + + make wilba_tech/rama_works_kara:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/wilba_tech/rama_works_kara/rules.mk b/keyboards/wilba_tech/rama_works_kara/rules.mk new file mode 100644 index 0000000000..8af9101d35 --- /dev/null +++ b/keyboards/wilba_tech/rama_works_kara/rules.mk @@ -0,0 +1,38 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Do not put the microcontroller into power saving mode +# when we get USB suspend event. We want it to keep updating +# backlight effects. +OPT_DEFS += -DNO_SUSPEND_POWER_DOWN + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output + +CIE1931_CURVE = yes + +LAYOUTS = 60_hhkb + +# project specific files +SRC = keyboards/wilba_tech/wt_main.c \ + keyboards/wilba_tech/wt_rgb_backlight.c \ + quantum/color.c \ + drivers/issi/is31fl3731.c \ + drivers/avr/i2c_master.c |