diff options
| -rw-r--r-- | keyboards/lets_split/keymaps/OLED_sample/config.h | 17 | ||||
| -rw-r--r-- | keyboards/lets_split/keymaps/OLED_sample/keymap.c | 3 | ||||
| -rw-r--r-- | keyboards/lets_split/keymaps/hexwire/config.h | 49 | ||||
| -rw-r--r-- | keyboards/lets_split/keymaps/hexwire/keymap.c | 12 | ||||
| -rw-r--r-- | keyboards/lets_split/lets_split.h | 14 | ||||
| -rw-r--r-- | keyboards/lets_split/readme.md | 11 | ||||
| -rw-r--r-- | keyboards/lets_split/rev1/rev1.h | 24 | ||||
| -rw-r--r-- | keyboards/lets_split/rev2/rev2.c | 1 | ||||
| -rw-r--r-- | keyboards/lets_split/rev2/rev2.h | 73 | ||||
| -rw-r--r-- | keyboards/lets_split/rules.mk | 14 | ||||
| -rw-r--r-- | keyboards/lets_split/split_util.c | 2 | ||||
| -rw-r--r-- | keyboards/lets_split/ssd1306.c | 3 | ||||
| -rw-r--r-- | keyboards/lets_split/ssd1306.h | 17 |
13 files changed, 120 insertions, 120 deletions
diff --git a/keyboards/lets_split/keymaps/OLED_sample/config.h b/keyboards/lets_split/keymaps/OLED_sample/config.h index 353ea368c6..8389ba111d 100644 --- a/keyboards/lets_split/keymaps/OLED_sample/config.h +++ b/keyboards/lets_split/keymaps/OLED_sample/config.h @@ -27,19 +27,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define TAPPING_FORCE_HOLD #define TAPPING_TERM 100 +#ifdef SUBPROJECT_rev1 + #include "../../rev1/config.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "../../rev2/config.h" +#endif + #undef RGBLED_NUM #define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 6 #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 #define RGBLIGHT_VAL_STEP 17 - - - - -#ifdef SUBPROJECT_rev1 - #include "../../rev1/config.h" -#endif -#ifdef SUBPROJECT_rev2 - #include "../../rev2/config.h" -#endif
\ No newline at end of file diff --git a/keyboards/lets_split/keymaps/OLED_sample/keymap.c b/keyboards/lets_split/keymaps/OLED_sample/keymap.c index 072b825abe..493ebcd3f2 100644 --- a/keyboards/lets_split/keymaps/OLED_sample/keymap.c +++ b/keyboards/lets_split/keymaps/OLED_sample/keymap.c @@ -6,6 +6,9 @@ #ifdef AUDIO_ENABLE #include "audio.h" #endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif extern keymap_config_t keymap_config; diff --git a/keyboards/lets_split/keymaps/hexwire/config.h b/keyboards/lets_split/keymaps/hexwire/config.h index 9c8c6d7f40..e315d8c0c3 100644 --- a/keyboards/lets_split/keymaps/hexwire/config.h +++ b/keyboards/lets_split/keymaps/hexwire/config.h @@ -20,51 +20,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define TAPPING_TERM 150 -#undef RGBLED_NUM -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 8 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 - #ifdef SUBPROJECT_rev1 #include "../../rev1/config.h" - #define COMPACT_KEYMAP( \ - k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ - k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \ - k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \ - k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \ - ) \ - { \ - { KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05 }, \ - { KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15 }, \ - { KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25 }, \ - { KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35 }, \ - { KC_##k40, KC_##k41, KC_##k42, KC_##k43, KC_##k44, KC_##k45 }, \ - { KC_##k50, KC_##k51, KC_##k52, KC_##k53, KC_##k54, KC_##k55 }, \ - { KC_##k60, KC_##k61, KC_##k62, KC_##k63, KC_##k64, KC_##k65 }, \ - { KC_##k70, KC_##k71, KC_##k72, KC_##k73, KC_##k74, KC_##k75 } \ - } #endif #ifdef SUBPROJECT_rev2 #include "../../rev2/config.h" - #define COMPACT_KEYMAP( \ - k00, k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, k40, \ - k10, k11, k12, k13, k14, k15, k55, k54, k53, k52, k51, k50, \ - k20, k21, k22, k23, k24, k25, k65, k64, k63, k62, k61, k60, \ - k30, k31, k32, k33, k34, k35, k75, k74, k73, k72, k71, k70 \ - ) \ - { \ - { KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05 }, \ - { KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15 }, \ - { KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25 }, \ - { KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35 }, \ - { KC_##k40, KC_##k41, KC_##k42, KC_##k43, KC_##k44, KC_##k45 }, \ - { KC_##k50, KC_##k51, KC_##k52, KC_##k53, KC_##k54, KC_##k55 }, \ - { KC_##k60, KC_##k61, KC_##k62, KC_##k63, KC_##k64, KC_##k65 }, \ - { KC_##k70, KC_##k71, KC_##k72, KC_##k73, KC_##k74, KC_##k75 } \ - } -#endif -#ifdef SUBPROJECT_rev2fliphalf - #include "../../rev2fliphalf/config.h" #endif + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 8 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/lets_split/keymaps/hexwire/keymap.c b/keyboards/lets_split/keymaps/hexwire/keymap.c index f8370490d6..fcf3cde758 100644 --- a/keyboards/lets_split/keymaps/hexwire/keymap.c +++ b/keyboards/lets_split/keymaps/hexwire/keymap.c @@ -39,7 +39,7 @@ enum custom_keycodes { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = COMPACT_KEYMAP( + [_QWERTY] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS, //|----+----+----+----+----+----| |----+----+----+----+----+----| @@ -51,7 +51,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //`----+----+----+----+----+----' `----+----+----+----+----+----' ), - [_COLEMAK] = COMPACT_KEYMAP( + [_COLEMAK] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS, //|----+----+----+----+----+----| |----+----+----+----+----+----| @@ -63,7 +63,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //`----+----+----+----+----+----' `----+----+----+----+----+----' ), - [_DVORAK] = COMPACT_KEYMAP( + [_DVORAK] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS, //|----+----+----+----+----+----| |----+----+----+----+----+----| @@ -75,7 +75,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //`----+----+----+----+----+----' `----+----+----+----+----+----' ), - [_LOWER] = COMPACT_KEYMAP( + [_LOWER] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , , //|----+----+----+----+----+----| |----+----+----+----+----+----| @@ -87,7 +87,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //`----+----+----+----+----+----' `----+----+----+----+----+----' ), - [_RAISE] = COMPACT_KEYMAP( + [_RAISE] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. ,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, , //|----+----+----+----+----+----| |----+----+----+----+----+----| @@ -99,7 +99,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //`----+----+----+----+----+----' `----+----+----+----+----+----' ), - [_FN3] = COMPACT_KEYMAP( + [_FN3] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. F12 , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 , //|----+----+----+----+----+----| |----+----+----+----+----+----| diff --git a/keyboards/lets_split/lets_split.h b/keyboards/lets_split/lets_split.h index 0de308c7a9..1892bf2cbd 100644 --- a/keyboards/lets_split/lets_split.h +++ b/keyboards/lets_split/lets_split.h @@ -11,6 +11,20 @@ #include "rev2fliphalf.h" #endif +// Used to create a keymap using only KC_ prefixed keys +#define KC_KEYMAP( \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ + ) \ + KEYMAP( \ + KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \ + KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \ + KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \ + KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \ + ) + #include "quantum.h" #endif
\ No newline at end of file diff --git a/keyboards/lets_split/readme.md b/keyboards/lets_split/readme.md index ecce3f4152..7e5a546022 100644 --- a/keyboards/lets_split/readme.md +++ b/keyboards/lets_split/readme.md @@ -7,6 +7,12 @@ Split keyboard firmware for Arduino Pro Micro or other ATmega32u4 based boards. +## Build Guide + +A build guide for putting together the Let's Split v2 can be found here: [An Overly Verbose Guide to Building a Let's Split Keyboard](https://github.com/nicinabox/lets-split-guide) + +There is additional information there about flashing and adding RGB underglow. + ## First Time Setup Download or clone the whole firmware and navigate to the keyboards/lets_split directory. Once your dev env is setup, you'll be able to generate the default .hex using: @@ -62,8 +68,7 @@ Apart from diodes and key switches for the keyboard matrix in each half, you will need: * 2 Arduino Pro Micro's. You can find theses on aliexpress for ≈3.50USD each. -* 2 TRS sockets -* 1 TRS cable. +* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable Alternatively, you can use any sort of cable and socket that has at least 3 wires. If you want to use I2C to communicate between halves, you will need a @@ -77,7 +82,7 @@ A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and t Wiring ------ -The 3 wires of the TRS cable need to connect GND, VCC, and digital pin 3 (i.e. +The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. PD0 on the ATmega32u4) between the two Pro Micros. Then wire your key matrix to any of the remaining 17 IO pins of the pro micro diff --git a/keyboards/lets_split/rev1/rev1.h b/keyboards/lets_split/rev1/rev1.h index 4667c9fb09..6bf9f0f038 100644 --- a/keyboards/lets_split/rev1/rev1.h +++ b/keyboards/lets_split/rev1/rev1.h @@ -9,20 +9,20 @@ //void promicro_bootloader_jmp(bool program); #define KEYMAP( \ - k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ - k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \ - k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \ - k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ ) \ { \ - { k00, k01, k02, k03, k04, k05 }, \ - { k10, k11, k12, k13, k14, k15 }, \ - { k20, k21, k22, k23, k24, k25 }, \ - { k30, k31, k32, k33, k34, k35 }, \ - { k40, k41, k42, k43, k44, k45 }, \ - { k50, k51, k52, k53, k54, k55 }, \ - { k60, k61, k62, k63, k64, k65 }, \ - { k70, k71, k72, k73, k74, k75 } \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, L35 }, \ + { R00, R01, R02, R03, R04, R05 }, \ + { R10, R11, R12, R13, R14, R15 }, \ + { R20, R21, R22, R23, R24, R25 }, \ + { R30, R31, R32, R33, R34, R35 } \ } #endif
\ No newline at end of file diff --git a/keyboards/lets_split/rev2/rev2.c b/keyboards/lets_split/rev2/rev2.c index 8bfa171d01..20a4c6be1e 100644 --- a/keyboards/lets_split/rev2/rev2.c +++ b/keyboards/lets_split/rev2/rev2.c @@ -37,4 +37,3 @@ void shutdown_user(void) { stop_all_notes(); #endif } - diff --git a/keyboards/lets_split/rev2/rev2.h b/keyboards/lets_split/rev2/rev2.h index 054731366e..0c4e8e7de1 100644 --- a/keyboards/lets_split/rev2/rev2.h +++ b/keyboards/lets_split/rev2/rev2.h @@ -10,62 +10,51 @@ #ifdef USE_I2C #include <stddef.h> #ifdef __AVR__ -#include <avr/io.h> -#include <avr/interrupt.h> -#endif -#ifdef SSD1306OLED -extern bool iota_gfx_init(void); -extern void iota_gfx_task(void); -extern bool iota_gfx_off(void); -extern bool iota_gfx_on(void); -extern void iota_gfx_flush(void); -extern void iota_gfx_write_char(uint8_t c); -extern void iota_gfx_write(const char *data); -extern void iota_gfx_write_P(const char *data); -extern void iota_gfx_clear_screen(void); + #include <avr/io.h> + #include <avr/interrupt.h> #endif #endif //void promicro_bootloader_jmp(bool program); #ifndef FLIP_HALF -//Standard Keymap +// Standard Keymap +// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left) #define KEYMAP( \ - k40, k41, k42, k43, k44, k45, k05, k04, k03, k02, k01, k00, \ - k50, k51, k52, k53, k54, k55, k15, k14, k13, k12, k11, k10, \ - k60, k61, k62, k63, k64, k65, k25, k24, k23, k22, k21, k20, \ - k70, k71, k72, k73, k74, k75, k35, k34, k33, k32, k31, k30 \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ ) \ { \ - { k45, k44, k43, k42, k41, k40 }, \ - { k55, k54, k53, k52, k51, k50 }, \ - { k65, k64, k63, k62, k61, k60 }, \ - { k75, k74, k73, k72, k71, k70 }, \ - { k00, k01, k02, k03, k04, k05 }, \ - { k10, k11, k12, k13, k14, k15 }, \ - { k20, k21, k22, k23, k24, k25 }, \ - { k30, k31, k32, k33, k34, k35 } \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, L35 }, \ + { R05, R04, R03, R02, R01, R00 }, \ + { R15, R14, R13, R12, R11, R10 }, \ + { R25, R24, R23, R22, R21, R20 }, \ + { R35, R34, R33, R32, R31, R30 } \ } - #else -// Keymap with one side flipped +// Keymap with right side flipped +// (TRRS jack on both halves are to the right) #define KEYMAP( \ - k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ - k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \ - k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \ - k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ ) \ { \ - { k00, k01, k02, k03, k04, k05 }, \ - { k10, k11, k12, k13, k14, k15 }, \ - { k20, k21, k22, k23, k24, k25 }, \ - { k30, k31, k32, k33, k34, k35 }, \ - { k45, k44, k43, k42, k41, k40 }, \ - { k55, k54, k53, k52, k51, k50 }, \ - { k65, k64, k63, k62, k61, k60 }, \ - { k75, k74, k73, k72, k71, k70 } \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, L35 }, \ + { R00, R01, R02, R03, R04, R05 }, \ + { R10, R11, R12, R13, R14, R15 }, \ + { R20, R21, R22, R23, R24, R25 }, \ + { R30, R31, R32, R33, R34, R35 } \ } #endif - -#endif
\ No newline at end of file +#endif diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk index ff159e0f06..79860ea35d 100644 --- a/keyboards/lets_split/rules.mk +++ b/keyboards/lets_split/rules.mk @@ -1,7 +1,7 @@ SRC += matrix.c \ i2c.c \ split_util.c \ - serial.c\ + serial.c \ ssd1306.c # MCU name @@ -74,3 +74,15 @@ USE_I2C ?= yes SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes + +avrdude: build + ls /dev/tty* > /tmp/1; \ + echo "Reset your Pro Micro now"; \ + while [[ -z $$USB ]]; do \ + sleep 1; \ + ls /dev/tty* > /tmp/2; \ + USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ + done; \ + avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex + +.PHONY: avrdude diff --git a/keyboards/lets_split/split_util.c b/keyboards/lets_split/split_util.c index 46586fbc00..39639c3b4b 100644 --- a/keyboards/lets_split/split_util.c +++ b/keyboards/lets_split/split_util.c @@ -21,7 +21,7 @@ static void setup_handedness(void) { #ifdef EE_HANDS isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); #else - // I2c_MASTER_RIGHT ish deprecate use MASTER_RIGHT instead since this works for both serial and i2c: + // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) isLeftHand = !has_usb(); #else diff --git a/keyboards/lets_split/ssd1306.c b/keyboards/lets_split/ssd1306.c index 3c7816bb32..76348ab7f2 100644 --- a/keyboards/lets_split/ssd1306.c +++ b/keyboards/lets_split/ssd1306.c @@ -1,8 +1,7 @@ +#include "ssd1306.h" #include "config.h" #include "i2c.h" -#include <stdbool.h> #include <string.h> -#include <stdio.h> #include "print.h" #include "lets_split.h" #include "common/glcdfont.c" diff --git a/keyboards/lets_split/ssd1306.h b/keyboards/lets_split/ssd1306.h new file mode 100644 index 0000000000..b0c74f987e --- /dev/null +++ b/keyboards/lets_split/ssd1306.h @@ -0,0 +1,17 @@ +#ifndef SSD1306_H +#define SSD1306_H + +#include <stdbool.h> +#include <stdio.h> + +bool iota_gfx_init(void); +void iota_gfx_task(void); +bool iota_gfx_off(void); +bool iota_gfx_on(void); +void iota_gfx_flush(void); +void iota_gfx_write_char(uint8_t c); +void iota_gfx_write(const char *data); +void iota_gfx_write_P(const char *data); +void iota_gfx_clear_screen(void); + +#endif |