diff options
| -rw-r--r-- | bootloader.mk | 4 | ||||
| -rw-r--r-- | docs/config_options.md | 1 | ||||
| -rw-r--r-- | docs/flashing.md | 25 | ||||
| -rw-r--r-- | keyboards/gingham/rules.mk | 4 | ||||
| -rw-r--r-- | tmk_core/avr.mk | 4 | ||||
| -rw-r--r-- | tmk_core/common/avr/bootloader.c | 77 |
6 files changed, 78 insertions, 37 deletions
diff --git a/bootloader.mk b/bootloader.mk index 4bcf183fb7..9d73063d0f 100644 --- a/bootloader.mk +++ b/bootloader.mk @@ -76,6 +76,10 @@ ifeq ($(strip $(BOOTLOADER)), bootloadHID) OPT_DEFS += -DBOOTLOADER_BOOTLOADHID BOOTLOADER_SIZE = 4096 endif +ifeq ($(strip $(BOOTLOADER)), USBasp) + OPT_DEFS += -DBOOTLOADER_USBASP + BOOTLOADER_SIZE = 4096 +endif ifdef BOOTLOADER_SIZE OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE)) diff --git a/docs/config_options.md b/docs/config_options.md index eb0a441ccc..33cb8da9bd 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -289,6 +289,7 @@ This is a [make](https://www.gnu.org/software/make/manual/make.html) file that i * `halfkay` * `caterina` * `bootloadHID` + * `USBasp` ## Feature Options diff --git a/docs/flashing.md b/docs/flashing.md index 3b4582f005..833b9dd629 100644 --- a/docs/flashing.md +++ b/docs/flashing.md @@ -119,6 +119,31 @@ Flashing sequence: 3. Flash a .hex file 4. Reset the device into application mode (may be done automatically) +## USBasploader + +USBasploader is a bootloader developed by matrixstorm. It is used in some non-USB AVR chips such as the ATmega328P, which run V-USB. + +To ensure compatibility with the USBasploader bootloader, make sure this block is present in your `rules.mk`: + + # Bootloader + # This definition is optional, and if your keyboard supports multiple bootloaders of + # different sizes, comment this out, and the correct address will be loaded + # automatically (+60). See bootloader.mk for all options. + BOOTLOADER = USBasp + +Compatible flashers: + +* [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (recommended GUI) +* [avrdude](http://www.nongnu.org/avrdude/) with the `usbasp` programmer +* [AVRDUDESS](https://github.com/zkemble/AVRDUDESS) + +Flashing sequence: + +1. Press the `RESET` keycode, or keep the boot pin shorted to GND while quickly shorting RST to GND +2. Wait for the OS to detect the device +3. Flash a .hex file +4. Reset the device into application mode (may be done automatically) + ## STM32 All STM32 chips come preloaded with a factory bootloader that cannot be modified nor deleted. Some STM32 chips have bootloaders that do not come with USB programming (e.g. STM32F103) but the process is still the same. diff --git a/keyboards/gingham/rules.mk b/keyboards/gingham/rules.mk index b66b071295..83f424ba03 100644 --- a/keyboards/gingham/rules.mk +++ b/keyboards/gingham/rules.mk @@ -49,7 +49,7 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT # atmega32a bootloadHID # # This uses usbaspbootloader -# BOOTLOADER = atmel-dfu +BOOTLOADER = USBasp # If you don't know the bootloader type, then you can specify the # Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line @@ -58,8 +58,6 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT # Atmel DFU loader 4096 # LUFA bootloader 4096 # USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 # Flash program via avrdude, but default command is not suitable. # You can use plaid:default:program diff --git a/tmk_core/avr.mk b/tmk_core/avr.mk index 6bf86d58a8..670e141bfd 100644 --- a/tmk_core/avr.mk +++ b/tmk_core/avr.mk @@ -245,6 +245,10 @@ avrdude-split-left: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware avrdude-split-right: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware $(call EXEC_AVRDUDE,eeprom-righthand.eep) +usbasp: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware + avrdude -p $(MCU) -c usbasp -U flash:w:$(BUILD_DIR)/$(TARGET).hex + + # Convert hex to bin. bin: $(BUILD_DIR)/$(TARGET).hex $(OBJCOPY) -Iihex -Obinary $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin diff --git a/tmk_core/common/avr/bootloader.c b/tmk_core/common/avr/bootloader.c index 3cdcd2e426..29036f7c5a 100644 --- a/tmk_core/common/avr/bootloader.c +++ b/tmk_core/common/avr/bootloader.c @@ -65,6 +65,13 @@ #define BOOT_SIZE_1024 0b010 #define BOOT_SIZE_2048 0b000 +//compatibility between ATMega8 and ATMega88 +#if !defined (MCUCSR) + #if defined (MCUSR) + #define MCUCSR MCUSR + #endif +#endif + /** \brief Entering the Bootloader via Software * * http://www.fourwalledcubicle.com/files/LUFA/Doc/120730/html/_page__software_bootloader_start.html @@ -149,6 +156,39 @@ void bootloader_jump(void) { while(1) {} // wait for watchdog timer to trigger + #elif defined(BOOTLOADER_USBASP) + // Taken with permission of Stephan Baerwolf from https://github.com/tinyusbboard/API/blob/master/apipage.c + wdt_enable(WDTO_15MS); + wdt_reset(); + asm volatile ( + "cli \n\t" + "ldi r29 , %[ramendhi] \n\t" + "ldi r28 , %[ramendlo] \n\t" + #if (FLASHEND>131071) + "ldi r18 , %[bootaddrhi] \n\t" + "st Y+, r18 \n\t" + #endif + "ldi r18 , %[bootaddrme] \n\t" + "st Y+, r18 \n\t" + "ldi r18 , %[bootaddrlo] \n\t" + "st Y+, r18 \n\t" + "out %[mcucsrio], __zero_reg__ \n\t" + "bootloader_startup_loop%=: \n\t" + "rjmp bootloader_startup_loop%= \n\t" + : + : [mcucsrio] "I" (_SFR_IO_ADDR(MCUCSR)), + #if (FLASHEND>131071) + [ramendhi] "M" (((RAMEND - 2) >> 8) & 0xff), + [ramendlo] "M" (((RAMEND - 2) >> 0) & 0xff), + [bootaddrhi] "M" ((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >>16) & 0xff), + #else + [ramendhi] "M" (((RAMEND - 1) >> 8) & 0xff), + [ramendlo] "M" (((RAMEND - 1) >> 0) & 0xff), + #endif + [bootaddrme] "M" ((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 8) & 0xff), + [bootaddrlo] "M" ((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 0) & 0xff) + ); + #else // Assume remaining boards are DFU, even if the flag isn't set #if !(defined(__AVR_ATmega32A__) || defined(__AVR_ATmega328P__)) // no USB - maybe BOOTLOADER_BOOTLOADHID instead though? @@ -172,24 +212,19 @@ void bootloader_jump(void) { } -#ifdef __AVR_ATmega32A__ - // MCUSR is actually called MCUCSR in ATmega32A - #define MCUSR MCUCSR -#endif - /* this runs before main() */ void bootloader_jump_after_watchdog_reset(void) __attribute__ ((used, naked, section (".init3"))); void bootloader_jump_after_watchdog_reset(void) { #ifndef BOOTLOADER_HALFKAY - if ((MCUSR & (1<<WDRF)) && reset_key == BOOTLOADER_RESET_KEY) { + if ((MCUCSR & (1<<WDRF)) && reset_key == BOOTLOADER_RESET_KEY) { reset_key = 0; // My custom USBasploader requires this to come up. - MCUSR = 0; + MCUCSR = 0; // Seems like Teensy halfkay loader requires clearing WDRF and disabling watchdog. - MCUSR &= ~(1<<WDRF); + MCUCSR &= ~(1<<WDRF); wdt_disable(); @@ -202,29 +237,3 @@ void bootloader_jump_after_watchdog_reset(void) } #endif } - - -#if 0 - /* - * USBaspLoader - I'm not sure if this is used at all in any projects - * would love to support it if it is -Jack - */ -#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__) - // This makes custom USBasploader come up. - MCUSR = 0; - - // initialize ports - PORTB = 0; PORTC= 0; PORTD = 0; - DDRB = 0; DDRC= 0; DDRD = 0; - - // disable interrupts - EIMSK = 0; EECR = 0; SPCR = 0; - ACSR = 0; SPMCSR = 0; WDTCSR = 0; PCICR = 0; - TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; - ADCSRA = 0; TWCR = 0; UCSR0B = 0; -#endif - - // This is compled into 'icall', address should be in word unit, not byte. - ((void (*)(void))(BOOTLOADER_START/2))(); -} -#endif |