diff options
| -rw-r--r-- | keyboards/hs60/config.h | 139 | ||||
| -rw-r--r-- | keyboards/hs60/hs60.c | 338 | ||||
| -rw-r--r-- | keyboards/hs60/hs60.h | 39 | ||||
| -rw-r--r-- | keyboards/hs60/keymaps/default/keymap.c | 46 | ||||
| -rw-r--r-- | keyboards/hs60/keymaps/default/readme.md | 6 | ||||
| -rw-r--r-- | keyboards/hs60/readme.md | 16 | ||||
| -rw-r--r-- | keyboards/hs60/rules.mk | 76 |
7 files changed, 660 insertions, 0 deletions
diff --git a/keyboards/hs60/config.h b/keyboards/hs60/config.h new file mode 100644 index 0000000000..185b31cf61 --- /dev/null +++ b/keyboards/hs60/config.h @@ -0,0 +1,139 @@ +/* +Copyright 2018 Yiancar + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0257 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Yiancar-Designs +#define PRODUCT HS60 +#define DESCRIPTION GH60 compatible, tool free RGB keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { B0, B1, B2, B3, F7 } +#define MATRIX_COL_PINS { F1, F4, F5, E6, F0, B7, D2, D3, D5, D4, D6, D7, B4, B5 } +#define UNUSED_PINS { B6, C6, C7, F6 } + +/* bootloader configuration */ + +#define QMK_ESC_OUTPUT B5 // usually COL +#define QMK_ESC_INPUT B2 // usually ROW + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* Backlight options */ + +//This is experimental do not enable yet +//#define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot) + +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended +#define RGB_MATRIX_SKIP_FRAMES 0 + +#define DRIVER_ADDR_1 0b1110100 +#define DRIVER_ADDR_2 0b1110101 + +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 30 +#define DRIVER_2_LED_TOTAL 32 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL + +#endif diff --git a/keyboards/hs60/hs60.c b/keyboards/hs60/hs60.c new file mode 100644 index 0000000000..b4820af273 --- /dev/null +++ b/keyboards/hs60/hs60.c @@ -0,0 +1,338 @@ +/* Copyright 2018 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "hs60.h" +#include "config.h" + +// Please ignore this is for upcoming features +/*#ifdef RAW_ENABLE + +void raw_hid_receive( uint8_t *data, uint8_t length ) +{ + uint8_t command = data[0]; + switch ( command ) + { + case id_protocol_version: + { + msg_protocol_version *msg = (msg_protocol_version*)&data[1]; + msg->version = PROTOCOL_VERSION; + break; + } +#if USE_KEYMAPS_IN_EEPROM + case id_keymap_keycode_load: + { + msg_keymap_keycode_load *msg = (msg_keymap_keycode_load*)&data[1]; + msg->keycode = keymap_keycode_load( msg->layer, msg->row, msg->column ); + break; + } + case id_keymap_keycode_save: + { + msg_keymap_keycode_save *msg = (msg_keymap_keycode_save*)&data[1]; + keymap_keycode_save( msg->layer, msg->row, msg->column, msg->keycode); + break; + } + case id_keymap_default_save: + { + keymap_default_save(); + break; + } +#endif // USE_KEYMAPS_IN_EEPROM + case id_backlight_config_set_values: + { + msg_backlight_config_set_values *msg = (msg_backlight_config_set_values*)&data[1]; + backlight_config_set_values(msg); + backlight_config_save(); + break; + } + case id_backlight_config_set_alphas_mods: + { + msg_backlight_config_set_alphas_mods *msg = (msg_backlight_config_set_alphas_mods*)&data[1]; + backlight_config_set_alphas_mods( msg->alphas_mods ); + backlight_config_save(); + break; + } + case id_backlight_set_key_color: + { + msg_backlight_set_key_color *msg = (msg_backlight_set_key_color*)&data[1]; + backlight_set_key_color(msg->row, msg->column, msg->hsv); + break; + } + case id_system_get_state: + { + msg_system_state *msg = (msg_system_state*)&data[1]; + msg->value = backlight_get_tick(); + break; + } + default: + { + // Unhandled message. + data[0] = id_unhandled; + break; + } + } + + // Return same buffer with values changed + raw_hid_send( data, length ); + +} + +#endif*/ + +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, C1_1, C3_2, C4_2}, //A1 + {0, C1_2, C2_2, C4_3}, //A2 + {0, C1_3, C2_3, C3_3}, //A3 + {0, C1_4, C2_4, C3_4}, //A4 + {0, C1_5, C2_5, C3_5}, //A5 + {0, C1_6, C2_6, C3_6}, //A6 + {0, C1_7, C2_7, C3_7}, //A7 + {0, C1_8, C2_8, C3_8}, //A8 + {0, C9_1, C8_1, C7_1}, //A9 + {0, C9_2, C8_2, C7_2}, //A10 + {0, C9_3, C8_3, C7_3}, //A11 + {0, C9_4, C8_4, C7_4}, //A12 + {0, C9_5, C8_5, C7_5}, //A13 + {0, C9_6, C8_6, C7_6}, //A14 + {0, C9_7, C8_7, C6_6}, //A15 + {0, C9_8, C7_7, C6_7}, //A16 + + {0, C1_9, C3_10, C4_10}, //B1 + {0, C1_10, C2_10, C4_11}, //B2 + {0, C1_11, C2_11, C3_11}, //B3 + {0, C1_12, C2_12, C3_12}, //B4 + {0, C1_13, C2_13, C3_13}, //B5 + {0, C1_14, C2_14, C3_14}, //B6 + {0, C1_15, C2_15, C3_15}, //B7 + {0, C1_16, C2_16, C3_16}, //B8 + {0, C9_9, C8_9, C7_9}, //B9 + {0, C9_10, C8_10, C7_10}, //B10 + {0, C9_11, C8_11, C7_11}, //B11 + {0, C9_12, C8_12, C7_12}, //B12 + {0, C9_13, C8_13, C7_13}, //B13 + {0, C9_14, C8_14, C7_14}, //B14 + + {1, C1_1, C3_2, C4_2}, //C1 + {1, C1_2, C2_2, C4_3}, //C2 + {1, C1_3, C2_3, C3_3}, //C3 + {1, C1_4, C2_4, C3_4}, //C4 + {1, C1_5, C2_5, C3_5}, //C5 + {1, C1_6, C2_6, C3_6}, //C6 + {1, C1_7, C2_7, C3_7}, //C7 + {1, C1_8, C2_8, C3_8}, //C8 + {1, C9_1, C8_1, C7_1}, //C9 + {1, C9_2, C8_2, C7_2}, //C10 + {1, C9_3, C8_3, C7_3}, //C11 + {1, C9_4, C8_4, C7_4}, //C12 + {1, C9_5, C8_5, C7_5}, //C13 + {1, C9_6, C8_6, C7_6}, //C14 + {1, C9_7, C8_7, C6_6}, //C15 + {1, C9_8, C7_7, C6_7}, //C16 + + {1, C1_9, C3_10, C4_10}, //D1 + {1, C1_10, C2_10, C4_11}, //D2 + {1, C1_11, C2_11, C3_11}, //D3 + {1, C1_12, C2_12, C3_12}, //D4 + {1, C1_13, C2_13, C3_13}, //D5 + {1, C1_14, C2_14, C3_14}, //D6 + {1, C1_15, C2_15, C3_15}, //D7 + {1, C1_16, C2_16, C3_16}, //D8 + {1, C9_9, C8_9, C7_9}, //D9 + {1, C9_10, C8_10, C7_10}, //D10 + {1, C9_11, C8_11, C7_11}, //D11 + {1, C9_12, C8_12, C7_12}, //D12 + {1, C9_13, C8_13, C7_13}, //D13 + {1, C9_14, C8_14, C7_14}, //D14 + {1, C9_15, C8_15, C6_14}, //D15 + {1, C9_16, C7_15, C6_15} //D16 +}; + +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { +// +// C7, C6, C5, C4, C3, C2, C1, A7, A6, A5, A4, A3, A2, A1, +// C8, C9, C10, C11, C12, C13, C14, A8, A9, A10, A11, A12, A13, ---, +// D4, D5, D6, D7, D8, C16, C15, B5, B6, B7, B8, A16, A15, A14, +// D3, D2, D1, D9, D10, D11, D12, B4, B3, B2, B1, B9, ---, B10, +// D16, D15, D14, ---, ---, ---, D13, ---, ---, ---, B14, B13, B12, B11 +/* {row | col << 4} + * | {x=0..224, y=0..64} + * | | modifier + * | | | */ + {{0|(13<<4)}, {224, 0}, 1}, //A1-A16 + {{0|(12<<4)}, {204, 0}, 0}, + {{0|(11<<4)}, {187, 0}, 0}, + {{0|(10<<4)}, {170, 0}, 0}, + {{0|(9<<4)}, {153, 0}, 0}, + {{0|(8<<4)}, {136, 0}, 0}, + {{0|(7<<4)}, {119, 0}, 0}, + {{1|(7<<4)}, {119, 16}, 0}, + {{1|(8<<4)}, {136, 16}, 0}, + {{1|(9<<4)}, {153, 16}, 0}, + {{1|(10<<4)}, {170, 16}, 0}, + {{1|(11<<4)}, {187, 16}, 0}, + {{1|(12<<4)}, {204, 16}, 0}, + {{2|(13<<4)}, {224, 8}, 1}, + {{2|(12<<4)}, {204, 32}, 0}, + {{2|(11<<4)}, {187, 32}, 0}, + + {{3|(10<<4)}, {170, 48}, 0}, //B1-B14 + {{3|(9<<4)}, {153, 48}, 0}, + {{3|(8<<4)}, {136, 48}, 0}, + {{3|(7<<4)}, {119, 48}, 0}, + {{2|(7<<4)}, {119, 32}, 0}, + {{2|(8<<4)}, {136, 32}, 0}, + {{2|(9<<4)}, {153, 32}, 0}, + {{2|(10<<4)}, {170, 32}, 0}, + {{3|(11<<4)}, {187, 48}, 0}, + {{3|(13<<4)}, {214, 48}, 1}, + {{4|(13<<4)}, {224, 64}, 1}, + {{4|(12<<4)}, {204, 64}, 1}, + {{4|(11<<4)}, {187, 64}, 1}, + {{4|(10<<4)}, {170, 64}, 1}, + + {{0|(6<<4)}, {102, 0}, 0}, //C1-C16 + {{0|(5<<4)}, { 85, 0}, 0}, + {{0|(4<<4)}, { 68, 0}, 0}, + {{0|(3<<4)}, { 51, 0}, 0}, + {{0|(2<<4)}, { 34, 0}, 0}, + {{0|(1<<4)}, { 17, 0}, 0}, + {{0|(0<<4)}, { 0, 0}, 1}, + {{1|(0<<4)}, { 0, 16}, 1}, + {{1|(1<<4)}, { 17, 16}, 0}, + {{1|(2<<4)}, { 34, 16}, 0}, + {{1|(3<<4)}, { 51, 16}, 0}, + {{1|(4<<4)}, { 68, 16}, 0}, + {{1|(5<<4)}, { 85, 16}, 0}, + {{1|(6<<4)}, {102, 16}, 0}, + {{2|(6<<4)}, {102, 32}, 0}, + {{2|(5<<4)}, { 85, 32}, 0}, + + {{3|(2<<4)}, { 32, 48}, 0}, //D1-D16 + {{3|(1<<4)}, { 17, 48}, 0}, + {{3|(0<<4)}, { 0, 48}, 1}, + {{2|(0<<4)}, { 0, 32}, 1}, + {{2|(1<<4)}, { 17, 32}, 0}, + {{2|(2<<4)}, { 34, 32}, 0}, + {{2|(3<<4)}, { 51, 32}, 0}, + {{2|(4<<4)}, { 68, 32}, 0}, + {{3|(3<<4)}, { 51, 48}, 0}, + {{3|(4<<4)}, { 68, 48}, 0}, + {{3|(5<<4)}, { 85, 48}, 0}, + {{3|(6<<4)}, {102, 48}, 0}, + {{4|(3<<4)}, {102, 64}, 0}, + {{4|(2<<4)}, { 34, 68}, 1}, + {{4|(1<<4)}, { 17, 68}, 1}, + {{4|(0<<4)}, { 0, 68}, 1} +}; + +void bootmagic_lite(void) +{ + // The lite version of TMK's bootmagic made by Wilba. + // 100% less potential for accidentally making the + // keyboard do stupid things. + + // We need multiple scans because debouncing can't be turned off. + matrix_scan(); + wait_ms(DEBOUNCING_DELAY); + matrix_scan(); + + // If the Esc and space bar are held down on power up, + // reset the EEPROM valid state and jump to bootloader. + // Assumes Esc is at [0,0] and spacebar is at [4,6]. + // This isn't very generalized, but we need something that doesn't + // rely on user's keymaps in firmware or EEPROM. + if ( ( matrix_get_row(0) & (1<<0) ) && + ( matrix_get_row(4) & (1<<6) ) ) + { + // Set the TMK/QMK EEPROM state as invalid. + eeconfig_disable(); + //eeprom_set_valid(false); + // Jump to bootloader. + bootloader_jump(); + } +} + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + bootmagic_lite(); + + // Please ignore this is for upcoming features + // If the EEPROM has the magic, the data is good. + // OK to load from EEPROM. + /*if (eeprom_is_valid()) + { + backlight_config_load(); + + // TODO: do something to "turn on" keymaps in EEPROM? + } + else + { + // If the EEPROM has not been saved before, or is out of date, + // save the default values to the EEPROM. Default values + // come from construction of the zeal_backlight_config instance. + backlight_config_save(); + + // Clear the LED colors stored in EEPROM + for ( int row=0; row < MATRIX_ROWS; row++ ) + { + HSV hsv; + for ( int column=0; column < MATRIX_COLS; column++ ) + { + hsv.h = rand() & 0xFF; + hsv.s = rand() & 0x7F; + hsv.v = 255; + backlight_set_key_color( row, column, hsv ); + } + } + #ifdef USE_KEYMAPS_IN_EEPROM + keymap_default_save(); + #endif + // Save the magic number last, in case saving was interrupted + eeprom_set_valid(true); + }*/ + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + //backlight_set_indicator_state(usb_led); +} + +void suspend_power_down_kb(void) +{ + rgb_matrix_set_suspend_state(true); +} + +void suspend_wakeup_init_kb(void) +{ + rgb_matrix_set_suspend_state(false); +}
\ No newline at end of file diff --git a/keyboards/hs60/hs60.h b/keyboards/hs60/hs60.h new file mode 100644 index 0000000000..b6de3b1511 --- /dev/null +++ b/keyboards/hs60/hs60.h @@ -0,0 +1,39 @@ +/* Copyright 2018 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef HS60_H +#define HS60_H + +#define XXX KC_NO + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. + +#define LAYOUT_60_iso( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \ + { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D } \ +} + +#endif diff --git a/keyboards/hs60/keymaps/default/keymap.c b/keyboards/hs60/keymaps/default/keymap.c new file mode 100644 index 0000000000..2a5e823618 --- /dev/null +++ b/keyboards/hs60/keymaps/default/keymap.c @@ -0,0 +1,46 @@ +/* Copyright 2018 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +//This is the ISO version of the PCB + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_60_iso( /* Base */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,\ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1) , KC_APP, KC_RCTL), + +[1] = LAYOUT_60_iso( /* FN */ + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\ + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET , \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS,\ + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +}; + +void matrix_init_user(void) { + //user initialization +} + +void matrix_scan_user(void) { + //user matrix +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +}
\ No newline at end of file diff --git a/keyboards/hs60/keymaps/default/readme.md b/keyboards/hs60/keymaps/default/readme.md new file mode 100644 index 0000000000..cf1ac7a969 --- /dev/null +++ b/keyboards/hs60/keymaps/default/readme.md @@ -0,0 +1,6 @@ +The default keymap for ISO HS60 +=============================== + + + +Default layer is normal ISO and Fn layer is used for RGB functions, Volume control and arrow cluster
\ No newline at end of file diff --git a/keyboards/hs60/readme.md b/keyboards/hs60/readme.md new file mode 100644 index 0000000000..15ecac6cd9 --- /dev/null +++ b/keyboards/hs60/readme.md @@ -0,0 +1,16 @@ +HS60 +==== + +[HS60](https://mechboards.co.uk/wp-content/uploads/2018/04/IMG_20180420_140353.jpg) + +This is a standard fixed layout 60% PCB. It comes in two varians, ISO and ANSI and support full per-key RGB. + +Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar) +Hardware Supported: HS60 ISO and ANSI PCBs with Atmega 32u4 +Hardware Availability: https://mechboards.co.uk/shop/all/hs60-pcb/ + +Make example for this keyboard (after setting up your build environment): + + make hs60:default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/hs60/rules.mk b/keyboards/hs60/rules.mk new file mode 100644 index 0000000000..050a1293ef --- /dev/null +++ b/keyboards/hs60/rules.mk @@ -0,0 +1,76 @@ +# MCU name +#MCU = at90usb1286 +MCU = atmega32u4 + +# project specific files +#SRC = + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Boot Section +BOOTLOADER = qmk-dfu + +# Do not put the microcontroller into power saving mode +# when we get USB suspend event. We want it to keep updating +# backlight effects. +OPT_DEFS += -DNO_SUSPEND_POWER_DOWN + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +RGB_MATRIX_ENABLE = yes # Use RGB matrix + +LAYOUTS = 60_iso # Define standard layouts + +# Experimental features for zealcmd please do no enable +#RAW_ENABLE = yes +#USE_KEYMAPS_IN_EEPROM = yes |