summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--keyboards/readme.md1
-rw-r--r--keyboards/ymdk_np21/README.md17
-rw-r--r--keyboards/ymdk_np21/backlight.c212
-rw-r--r--keyboards/ymdk_np21/backlight_custom.h15
-rw-r--r--keyboards/ymdk_np21/breathing_custom.h140
-rw-r--r--keyboards/ymdk_np21/config.h54
-rw-r--r--keyboards/ymdk_np21/i2c.c104
-rw-r--r--keyboards/ymdk_np21/i2c.h25
-rw-r--r--keyboards/ymdk_np21/keymaps/default/keymap.c47
-rw-r--r--keyboards/ymdk_np21/matrix.c118
-rw-r--r--keyboards/ymdk_np21/rules.mk59
-rw-r--r--keyboards/ymdk_np21/usbconfig.h397
-rw-r--r--keyboards/ymdk_np21/ymdk_np21.c80
-rw-r--r--keyboards/ymdk_np21/ymdk_np21.h43
14 files changed, 1312 insertions, 0 deletions
diff --git a/keyboards/readme.md b/keyboards/readme.md
index b81d5841ee..35900f611f 100644
--- a/keyboards/readme.md
+++ b/keyboards/readme.md
@@ -60,3 +60,4 @@ These keyboards are part of the QMK repository, but their manufacturers are not
* [WhiteFox](/keyboards/whitefox) — A 65% keyboard designed as a partnership by matt3o, Massdrop and Input Club
* [Vision Division](/keyboards/vision_division) — Full Size / Split Linear Keyboard by IBNobody.
* [XD75](/keyboards/xd75) — 15x5 ortholinear keyboard by XIUDI.
+* [YMDK NP21](/keyboards/ymdk_np21) — ps2avrGB based number pad (numpad) sold by YMDK on Aliexpress.
diff --git a/keyboards/ymdk_np21/README.md b/keyboards/ymdk_np21/README.md
new file mode 100644
index 0000000000..79e3386f09
--- /dev/null
+++ b/keyboards/ymdk_np21/README.md
@@ -0,0 +1,17 @@
+# YMDK NP21
+
+![kp21 — full grid layout](https://ae01.alicdn.com/kf/HTB1d.txfHsTMeJjSszhq6AGCFXaF.jpg?size=35021&height=662&width=1000&hash=62b3a453686e2154dc51a7af67495e28)
+
+ps2avrGB based number-pad sold fully assembled by YMDK on Aliexpress.
+
+Keyboard Maintainer: [QMK Community](https://github.com/qmk)
+Hardware Supported: Atmega32A
+Hardware Availability: [AliExpress](https://www.aliexpress.com/item/21-Key-NPKC-Programmable-Cherry-MX-Kailh-Gateron-Switches-Mechanical-Keyboard-Numpad-Free-shipping/32812732361.html)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make ymdk_np21:default:program
+
+Plugging the board in while pressing 'Top Left Key' (USB on top) will force it to boot bootloader without loading the firmware.
+
+The code for NP21 is a minor edit of jj40.
diff --git a/keyboards/ymdk_np21/backlight.c b/keyboards/ymdk_np21/backlight.c
new file mode 100644
index 0000000000..079c410ff5
--- /dev/null
+++ b/keyboards/ymdk_np21/backlight.c
@@ -0,0 +1,212 @@
+/**
+ * Backlighting code for PS2AVRGB boards (ATMEGA32A)
+ * Kenneth A. (github.com/krusli | krusli.me)
+ */
+
+#include "backlight.h"
+#include "quantum.h"
+
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+
+#include "backlight_custom.h"
+#include "breathing_custom.h"
+
+// DEBUG
+#include <stdlib.h>
+#include <stdio.h>
+
+// Port D: digital pins of the AVR chipset
+#define NUMLOCK_PORT (1 << 1) // 1st pin of Port D (digital)
+#define CAPSLOCK_PORT (1 << 2) // 2nd pin
+#define BACKLIGHT_PORT (1 << 4) // 4th pin
+#define SCROLLLOCK_PORT (1 << 6) // 6th pin
+
+#define TIMER_CLK_DIV64 0x03 ///< Timer clocked at F_CPU/64
+#define TIMER1PRESCALE TIMER_CLK_DIV64 ///< timer 1 prescaler default
+
+#define TIMER_PRESCALE_MASK 0x07 ///< Timer Prescaler Bit-Mask
+
+#define PWM_MAX 0xFF
+#define TIMER_TOP 255 // 8 bit PWM
+
+extern backlight_config_t backlight_config;
+
+/**
+ * References
+ * Port Registers: https://www.arduino.cc/en/Reference/PortManipulation
+ * TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b
+ * Timers: http://www.avrbeginners.net/architecture/timers/timers.html
+ * 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/
+ * PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware
+ */
+
+// @Override
+// turn LEDs on and off depending on USB caps/num/scroll lock states.
+void led_set_user(uint8_t usb_led) {
+ if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+ // turn on
+ DDRD |= NUMLOCK_PORT;
+ PORTD |= NUMLOCK_PORT;
+ } else {
+ // turn off
+ DDRD &= ~NUMLOCK_PORT;
+ PORTD &= ~NUMLOCK_PORT;
+ }
+
+ if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+ DDRD |= CAPSLOCK_PORT;
+ PORTD |= CAPSLOCK_PORT;
+ } else {
+ DDRD &= ~CAPSLOCK_PORT;
+ PORTD &= ~CAPSLOCK_PORT;
+ }
+
+ if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+ DDRD |= SCROLLLOCK_PORT;
+ PORTD |= SCROLLLOCK_PORT;
+ } else {
+ DDRD &= ~SCROLLLOCK_PORT;
+ PORTD &= ~SCROLLLOCK_PORT;
+ }
+}
+
+#ifdef BACKLIGHT_ENABLE
+
+// sets up Timer 1 for 8-bit PWM
+void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE
+ // default 8 bit mode
+ TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH
+ TCCR1A |= (1 << 0); // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW
+
+ // clear output compare value A
+ // outb(OCR1AH, 0);
+ // outb(OCR1AL, 0);
+
+ // clear output comparator registers for B
+ OCR1BH = 0; // outb(OCR1BH, 0);
+ OCR1BL = 0; // outb(OCR1BL, 0);
+}
+
+bool is_init = false;
+void timer1Init(void) {
+ // timer1SetPrescaler(TIMER1PRESCALE)
+ // set to DIV/64
+ (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE;
+
+ // reset TCNT1
+ TCNT1H = 0; // outb(TCNT1H, 0);
+ TCNT1L = 0; // outb(TCNT1L, 0);
+
+ // TOIE1: Timer Overflow Interrupt Enable (Timer 1);
+ TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1);
+
+ is_init = true;
+}
+
+void timer1UnInit(void) {
+ // set prescaler back to NONE
+ (TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00; // TIMERRTC_CLK_STOP
+
+ // disable timer overflow interrupt
+ TIMSK &= ~_BV(TOIE1); // overflow bit?
+
+ setPWM(0);
+
+ is_init = false;
+}
+
+
+// handle TCNT1 overflow
+//! Interrupt handler for tcnt1 overflow interrupt
+ISR(TIMER1_OVF_vect, ISR_NOBLOCK)
+{
+ // sei();
+ // handle breathing here
+ #ifdef BACKLIGHT_BREATHING
+ if (is_breathing()) {
+ custom_breathing_handler();
+ }
+ #endif
+
+ // TODO call user defined function
+}
+
+// enable timer 1 PWM
+// timer1PWMBOn()
+void timer1PWMBEnable(void) {
+ // turn on channel B (OC1B) PWM output
+ // set OC1B as non-inverted PWM
+ TCCR1A |= _BV(COM1B1);
+ TCCR1A &= ~_BV(COM1B0);
+}
+
+// disable timer 1 PWM
+// timer1PWMBOff()
+void timer1PWMBDisable(void) {
+ TCCR1A &= ~_BV(COM1B1);
+ TCCR1A &= ~_BV(COM1B0);
+}
+
+void enableBacklight(void) {
+ DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output
+ PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high
+}
+
+void disableBacklight(void) {
+ // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input
+ PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low
+}
+
+void startPWM(void) {
+ timer1Init();
+ timer1PWMBEnable();
+ enableBacklight();
+}
+
+void stopPWM(void) {
+ timer1UnInit();
+ disableBacklight();
+ timer1PWMBDisable();
+}
+
+void b_led_init_ports(void) {
+ /* turn backlight on/off depending on user preference */
+ #if BACKLIGHT_ON_STATE == 0
+ // DDRx register: sets the direction of Port D
+ // DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input
+ PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low
+ #else
+ DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output
+ PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high
+ #endif
+
+ timer1PWMSetup();
+ startPWM();
+
+ #ifdef BACKLIGHT_BREATHING
+ breathing_enable();
+ #endif
+}
+
+void b_led_set(uint8_t level) {
+ if (level > BACKLIGHT_LEVELS) {
+ level = BACKLIGHT_LEVELS;
+ }
+
+ setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS));
+}
+
+// called every matrix scan
+void b_led_task(void) {
+ // do nothing for now
+}
+
+void setPWM(uint16_t xValue) {
+ if (xValue > TIMER_TOP) {
+ xValue = TIMER_TOP;
+ }
+ OCR1B = xValue; // timer1PWMBSet(xValue);
+}
+
+#endif // BACKLIGHT_ENABLE
diff --git a/keyboards/ymdk_np21/backlight_custom.h b/keyboards/ymdk_np21/backlight_custom.h
new file mode 100644
index 0000000000..7210be840e
--- /dev/null
+++ b/keyboards/ymdk_np21/backlight_custom.h
@@ -0,0 +1,15 @@
+/**
+ * Backlighting code for PS2AVRGB boards (ATMEGA32A)
+ * Kenneth A. (github.com/krusli | krusli.me)
+ */
+
+#ifndef BACKLIGHT_CUSTOM_H
+#define BACKLIGHT_CUSTOM_H
+
+#include <avr/pgmspace.h>
+void b_led_init_ports(void);
+void b_led_set(uint8_t level);
+void b_led_task(void);
+void setPWM(uint16_t xValue);
+
+#endif // BACKLIGHT_CUSTOM_H
diff --git a/keyboards/ymdk_np21/breathing_custom.h b/keyboards/ymdk_np21/breathing_custom.h
new file mode 100644
index 0000000000..71416b1b45
--- /dev/null
+++ b/keyboards/ymdk_np21/breathing_custom.h
@@ -0,0 +1,140 @@
+/**
+ * Breathing effect code for PS2AVRGB boards (ATMEGA32A)
+ * Works in conjunction with `backlight.c`.
+ *
+ * Code adapted from `quantum.c` to register with the existing TIMER1 overflow
+ * handler in `backlight.c` instead of setting up its own timer.
+ * Kenneth A. (github.com/krusli | krusli.me)
+ */
+
+#ifdef BACKLIGHT_ENABLE
+#ifdef BACKLIGHT_BREATHING
+
+#include "backlight_custom.h"
+
+#ifndef BREATHING_PERIOD
+#define BREATHING_PERIOD 6
+#endif
+
+#define breathing_min() do {breathing_counter = 0;} while (0)
+#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0)
+
+// TODO make this share code with quantum.c
+
+#define BREATHING_NO_HALT 0
+#define BREATHING_HALT_OFF 1
+#define BREATHING_HALT_ON 2
+#define BREATHING_STEPS 128
+
+static uint8_t breathing_period = BREATHING_PERIOD;
+static uint8_t breathing_halt = BREATHING_NO_HALT;
+static uint16_t breathing_counter = 0;
+
+static bool breathing = false;
+
+bool is_breathing(void) {
+ return breathing;
+}
+
+// See http://jared.geek.nz/2013/feb/linear-led-pwm
+static uint16_t cie_lightness(uint16_t v) {
+ if (v <= 5243) // if below 8% of max
+ return v / 9; // same as dividing by 900%
+ else {
+ uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
+ // to get a useful result with integer division, we shift left in the expression above
+ // and revert what we've done again after squaring.
+ y = y * y * y >> 8;
+ if (y > 0xFFFFUL) // prevent overflow
+ return 0xFFFFU;
+ else
+ return (uint16_t) y;
+ }
+}
+
+void breathing_enable(void) {
+ breathing = true;
+ breathing_counter = 0;
+ breathing_halt = BREATHING_NO_HALT;
+ // interrupt already registered
+}
+
+void breathing_pulse(void) {
+ if (get_backlight_level() == 0)
+ breathing_min();
+ else
+ breathing_max();
+ breathing_halt = BREATHING_HALT_ON;
+ // breathing_interrupt_enable();
+ breathing = true;
+}
+
+void breathing_disable(void) {
+ breathing = false;
+ // backlight_set(get_backlight_level());
+ b_led_set(get_backlight_level()); // custom implementation of backlight_set()
+}
+
+void breathing_self_disable(void)
+{
+ if (get_backlight_level() == 0)
+ breathing_halt = BREATHING_HALT_OFF;
+ else
+ breathing_halt = BREATHING_HALT_ON;
+}
+
+void breathing_toggle(void) {
+ if (is_breathing())
+ breathing_disable();
+ else
+ breathing_enable();
+}
+
+void breathing_period_set(uint8_t value)
+{
+ if (!value)
+ value = 1;
+ breathing_period = value;
+}
+
+void breathing_period_default(void) {
+ breathing_period_set(BREATHING_PERIOD);
+}
+
+void breathing_period_inc(void)
+{
+ breathing_period_set(breathing_period+1);
+}
+
+void breathing_period_dec(void)
+{
+ breathing_period_set(breathing_period-1);
+}
+
+/* To generate breathing curve in python:
+ * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
+ */
+static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+
+// Use this before the cie_lightness function.
+static inline uint16_t scale_backlight(uint16_t v) {
+ return v / BACKLIGHT_LEVELS * get_backlight_level();
+}
+
+void custom_breathing_handler(void) {
+ uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS;
+ // resetting after one period to prevent ugly reset at overflow.
+ breathing_counter = (breathing_counter + 1) % (breathing_period * 244);
+ uint8_t index = breathing_counter / interval % BREATHING_STEPS;
+
+ if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
+ ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
+ {
+ // breathing_interrupt_disable();
+ }
+
+ setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U)));
+}
+
+#endif // BACKLIGHT_BREATHING
+#endif // BACKLIGHT_ENABLE
diff --git a/keyboards/ymdk_np21/config.h b/keyboards/ymdk_np21/config.h
new file mode 100644
index 0000000000..2b358113d4
--- /dev/null
+++ b/keyboards/ymdk_np21/config.h
@@ -0,0 +1,54 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "config_common.h"
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#define VENDOR_ID 0x20A0
+#define PRODUCT_ID 0x422D
+// TODO: share these strings with usbconfig.h
+// Edit usbconfig.h to change these.
+#define MANUFACTURER ymdk
+#define PRODUCT np21
+
+/* matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 15
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_LEVELS 12
+// #define BACKLIGHT_BREATHING // works, but BL_TOGG might not work
+
+#define TAPPING_TOGGLE 3
+
+#define NO_UART 1
+
+/* RGB underglow */
+// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards.
+// The same pin is used on the JJ40, at least.
+#define RGBLED_NUM 5
+#define RGB_DI_PIN E2 // NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0.
+#define RGBLIGHT_ANIMATIONS
+
+/* key combination for command */
+#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+#endif
diff --git a/keyboards/ymdk_np21/i2c.c b/keyboards/ymdk_np21/i2c.c
new file mode 100644
index 0000000000..c27f3e3d17
--- /dev/null
+++ b/keyboards/ymdk_np21/i2c.c
@@ -0,0 +1,104 @@
+/*
+Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include <util/twi.h>
+
+#include "i2c.h"
+
+void i2c_set_bitrate(uint16_t bitrate_khz) {
+ uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
+ if (bitrate_div >= 16) {
+ bitrate_div = (bitrate_div - 16) / 2;
+ }
+ TWBR = bitrate_div;
+}
+
+void i2c_init(void) {
+ // set pull-up resistors on I2C bus pins
+ PORTC |= 0b11;
+
+ i2c_set_bitrate(400);
+
+ // enable TWI (two-wire interface)
+ TWCR |= (1 << TWEN);
+
+ // enable TWI interrupt and slave address ACK
+ TWCR |= (1 << TWIE);
+ TWCR |= (1 << TWEA);
+}
+
+uint8_t i2c_start(uint8_t address) {
+ // reset TWI control register
+ TWCR = 0;
+
+ // begin transmission and wait for it to end
+ TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
+ while (!(TWCR & (1<<TWINT)));
+
+ // check if the start condition was successfully transmitted
+ if ((TWSR & 0xF8) != TW_START) {
+ return 1;
+ }
+
+ // transmit address and wait
+ TWDR = address;
+ TWCR = (1<<TWINT) | (1<<TWEN);
+ while (!(TWCR & (1<<TWINT)));
+
+ // check if the device has acknowledged the READ / WRITE mode
+ uint8_t twst = TW_STATUS & 0xF8;
+ if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
+ return 1;
+ }
+
+ return 0;
+}
+
+void i2c_stop(void) {
+ TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+}
+
+uint8_t i2c_write(uint8_t data) {
+ TWDR = data;
+
+ // transmit data and wait
+ TWCR = (1<<TWINT) | (1<<TWEN);
+ while (!(TWCR & (1<<TWINT)));
+
+ if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
+ return 1;
+ }
+
+ return 0;
+}
+
+uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
+ if (i2c_start(address)) {
+ return 1;
+ }
+
+ for (uint16_t i = 0; i < length; i++) {
+ if (i2c_write(data[i])) {
+ return 1;
+ }
+ }
+
+ i2c_stop();
+
+ return 0;
+}
diff --git a/keyboards/ymdk_np21/i2c.h b/keyboards/ymdk_np21/i2c.h
new file mode 100644
index 0000000000..27c9d3d050
--- /dev/null
+++ b/keyboards/ymdk_np21/i2c.h
@@ -0,0 +1,25 @@
+/*
+Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __I2C_H__
+#define __I2C_H__
+
+void i2c_init(void);
+void i2c_set_bitrate(uint16_t bitrate_khz);
+uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
+
+#endif
diff --git a/keyboards/ymdk_np21/keymaps/default/keymap.c b/keyboards/ymdk_np21/keymaps/default/keymap.c
new file mode 100644
index 0000000000..e79d326b7c
--- /dev/null
+++ b/keyboards/ymdk_np21/keymaps/default/keymap.c
@@ -0,0 +1,47 @@
+#include "ymdk_np21.h"
+#include "action_layer.h"
+
+#define _NP 0
+#define _BL 1
+
+enum custom_keycodes {
+ NP = SAFE_RANGE,
+ BL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty
+ * ,-----------------------------------------.
+ * | 0 | 1 | 4 | 7 | NUM | ESC |
+ * |------+------+------+------+------+------|
+ * | . | 2 | 5 | 8 | / | TAB |---,
+ * |------+------+------+------+------+------|USB|
+ * | DOT | 3 | 6 | 9 | * | BS |---'
+ * |------+------+------+------+------+------|
+ * | Enter| Enter| + | + | - | FN |
+ * `-----------------------------------------'
+ */
+[_NP] = KEYMAP( \
+ KC_KP_0, KC_KP_1, KC_KP_4, KC_KP_7, KC_NUMLOCK, KC_ESC, \
+ KC_DOT, KC_KP_2, KC_KP_5, KC_KP_8, KC_KP_SLASH, KC_TAB, \
+ KC_KP_DOT, KC_KP_3, KC_KP_6, KC_KP_9, KC_KP_ASTERISK, KC_BSPACE, \
+ KC_KP_ENTER, KC_KP_ENTER, KC_KP_PLUS, KC_KP_PLUS, KC_KP_MINUS, MO(_BL) \
+),
+/* Qwerty
+ * ,---------------------------------------------.
+ * | BL_BRTG | | | | | |
+ * |---------+--------+---------+--------+---+---|
+ * | | BL_OFF | BL_TOGG | BL_ON | | |---,
+ * |---------+--------+---------+--------+---+---|USB|
+ * | | | | | | |---'
+ * |---------+--------+---------+--------+---+---|
+ * | BL_DEC | BL_DEC | BL_INC | BL_INC | | |
+ * `---------------------------------------------'
+ */
+[_BL] = KEYMAP( \
+ BL_BRTG, _______, _______, _______, _______, _______, \
+ _______, BL_OFF, BL_TOGG, BL_ON, _______, _______, \
+ _______, _______, _______, _______, _______, _______, \
+ BL_DEC, BL_DEC, BL_INC, BL_INC, _______, _______ \
+)
+};
diff --git a/keyboards/ymdk_np21/matrix.c b/keyboards/ymdk_np21/matrix.c
new file mode 100644
index 0000000000..a9e9cb5397
--- /dev/null
+++ b/keyboards/ymdk_np21/matrix.c
@@ -0,0 +1,118 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include <util/delay.h>
+
+#include "matrix.h"
+
+#ifndef DEBOUNCE
+# define DEBOUNCE 5
+#endif
+
+static uint8_t debouncing = DEBOUNCE;
+
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+void matrix_set_row_status(uint8_t row);
+uint8_t bit_reverse(uint8_t x);
+
+void matrix_init(void) {
+ // all outputs for rows high
+ DDRB = 0xFF;
+ PORTB = 0xFF;
+ // all inputs for columns
+ DDRA = 0x00;
+ DDRC &= ~(0x111111<<2);
+ DDRD &= ~(1<<PIND7);
+ // all columns are pulled-up
+ PORTA = 0xFF;
+ PORTC |= (0b111111<<2);
+ PORTD |= (1<<PIND7);
+
+ // initialize matrix state: all keys off
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ matrix[row] = 0x00;
+ matrix_debouncing[row] = 0x00;
+ }
+
+ matrix_init_quantum(); // missing from original port by Luiz
+}
+
+uint8_t matrix_scan(void) {
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ matrix_set_row_status(row);
+ _delay_us(5);
+
+ matrix_row_t cols = (
+ // cols 0..7, PORTA 0 -> 7
+ (~PINA) & 0xFF
+ ) | (
+ // cols 8..13, PORTC 7 -> 0
+ bit_reverse((~PINC) & 0xFF) << 8
+ ) | (
+ // col 14, PORTD 7
+ ((~PIND) & (1 << PIND7)) << 7
+ );
+
+ if (matrix_debouncing[row] != cols) {
+ matrix_debouncing[row] = cols;
+ debouncing = DEBOUNCE;
+ }
+ }
+
+ if (debouncing) {
+ if (--debouncing) {
+ _delay_ms(1);
+ } else {
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ matrix[i] = matrix_debouncing[i];
+ }
+ }
+ }
+
+ matrix_scan_quantum(); // also missing in original PS2AVRGB implementation
+
+ return 1;
+}
+
+void matrix_scan_kb(void) {
+ // Looping keyboard code goes here
+ // This runs every cycle (a lot)
+ matrix_scan_user();
+};
+
+// declarations
+void matrix_set_row_status(uint8_t row) {
+ DDRB = (1 << row);
+ PORTB = ~(1 << row);
+}
+
+uint8_t bit_reverse(uint8_t x) {
+ x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
+ x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
+ x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
+ return x;
+}
+
+inline matrix_row_t matrix_get_row(uint8_t row) {
+ return matrix[row];
+}
+
+void matrix_print(void) {
+}
diff --git a/keyboards/ymdk_np21/rules.mk b/keyboards/ymdk_np21/rules.mk
new file mode 100644
index 0000000000..670967fbd9
--- /dev/null
+++ b/keyboards/ymdk_np21/rules.mk
@@ -0,0 +1,59 @@
+# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# MCU name
+MCU = atmega32a
+PROTOCOL = VUSB
+
+# unsupported features for now
+NO_UART = yes
+NO_SUSPEND_POWER_DOWN = yes
+
+# processor frequency
+F_CPU = 12000000
+
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = bootloadHID
+
+# build options
+BOOTMAGIC_ENABLE = no
+MOUSEKEY_ENABLE = no
+EXTRAKEY_ENABLE = yes
+CONSOLE_ENABLE = no
+COMMAND_ENABLE = yes
+
+BACKLIGHT_ENABLE = yes
+BACKLIGHT_CUSTOM_DRIVER = yes
+
+RGBLIGHT_ENABLE = yes
+RGBLIGHT_CUSTOM_DRIVER = yes
+# DISABLE_WS2812 = no
+
+KEY_LOCK_ENABLE = yes
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+OPT_DEFS = -DDEBUG_LEVEL=0
+
+# custom matrix setup
+CUSTOM_MATRIX = yes
+SRC = matrix.c i2c.c backlight.c
+
+# programming options
+PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
diff --git a/keyboards/ymdk_np21/usbconfig.h b/keyboards/ymdk_np21/usbconfig.h
new file mode 100644
index 0000000000..ad97e7f0a3
--- /dev/null
+++ b/keyboards/ymdk_np21/usbconfig.h
@@ -0,0 +1,397 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#ifndef __usbconfig_h_included__
+#define __usbconfig_h_included__
+
+#include "config.h"
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT 3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT 2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC 0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT 4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT 1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER 3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT 0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE 0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL 1
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED 0