diff options
| -rw-r--r-- | keyboards/hadron/ver3/chconf.h | 4 | ||||
| -rw-r--r-- | keyboards/hadron/ver3/config.h | 42 | ||||
| -rw-r--r-- | keyboards/hadron/ver3/halconf.h | 2 | ||||
| -rw-r--r-- | keyboards/hadron/ver3/keymaps/default/keymap.c | 10 | ||||
| -rw-r--r-- | keyboards/hadron/ver3/keymaps/ishtob/keymap.c | 10 | ||||
| -rw-r--r-- | keyboards/hadron/ver3/keymaps/readme.md | 7 | ||||
| -rw-r--r-- | keyboards/hadron/ver3/matrix.c | 195 | ||||
| -rw-r--r-- | keyboards/hadron/ver3/mcuconf.h | 2 | ||||
| -rw-r--r-- | keyboards/hadron/ver3/rules.mk | 46 | ||||
| -rw-r--r-- | keyboards/hadron/ver3/ver3.c | 38 | ||||
| -rw-r--r-- | keyboards/hadron/ver3/ver3.h | 9 |
11 files changed, 90 insertions, 275 deletions
diff --git a/keyboards/hadron/ver3/chconf.h b/keyboards/hadron/ver3/chconf.h index 1d9f12ff1f..ce44925f3c 100644 --- a/keyboards/hadron/ver3/chconf.h +++ b/keyboards/hadron/ver3/chconf.h @@ -48,7 +48,7 @@ * @details Frequency of the system timer that drives the system ticks. This * setting also defines the system tick time unit. */ -#define CH_CFG_ST_FREQUENCY 100000 +#define CH_CFG_ST_FREQUENCY 1000 /** * @brief Time delta constant for the tick-less mode. @@ -58,7 +58,7 @@ * The value one is not valid, timeouts are rounded up to * this value. */ -#define CH_CFG_ST_TIMEDELTA 2 +#define CH_CFG_ST_TIMEDELTA 0 /** @} */ diff --git a/keyboards/hadron/ver3/config.h b/keyboards/hadron/ver3/config.h index 1804921825..82081ba437 100644 --- a/keyboards/hadron/ver3/config.h +++ b/keyboards/hadron/ver3/config.h @@ -27,6 +27,28 @@ #define MATRIX_ROWS 5 #define MATRIX_COLS 15 +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#undef MATRIX_ROW_PINS +#undef MATRIX_COL_PINS + +#define MATRIX_ROW_PINS { C15, C14, A10, A9, A8 } +#define MATRIX_COL_PINS { B8, B2, B10, A0, A1, A2, B0, A3, B1, A6, A7, B12, C13, B11, B9 } +#define UNUSED_PINS + +#define NUMBER_OF_ENCODERS 1 +#define ENCODERS_PAD_A { B13 } +#define ENCODERS_PAD_B { B14 } + + //Audio #undef AUDIO_VOICES #undef C6_AUDIO @@ -55,16 +77,6 @@ #define micro_oled_rotate_180 #endif -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 6 @@ -185,13 +197,13 @@ #define ZC_DET_TIME 0 #define AUTO_CAL_TIME 3 -//#define RGBLIGHT_ANIMATIONS +#define RGBLIGHT_ANIMATIONS -//#define RGBLED_NUM 10 -//#define RGB_DI_PIN B5 -//#define DRIVER_LED_TOTAL RGBLED_NUM +#define RGBLED_NUM 10 +#define RGB_DI_PIN B5 +#define DRIVER_LED_TOTAL RGBLED_NUM -//#define RGB_MATRIX_KEYPRESSES +// #define RGB_MATRIX_KEYPRESSES #define SOLENOID_PIN A14 diff --git a/keyboards/hadron/ver3/halconf.h b/keyboards/hadron/ver3/halconf.h index c3e0cbb728..a14ace02b4 100644 --- a/keyboards/hadron/ver3/halconf.h +++ b/keyboards/hadron/ver3/halconf.h @@ -111,7 +111,7 @@ * @brief Enables the PWM subsystem. */ #if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE +#define HAL_USE_PWM TRUE #endif /** diff --git a/keyboards/hadron/ver3/keymaps/default/keymap.c b/keyboards/hadron/ver3/keymaps/default/keymap.c index ac1db2c2ac..9afddba26a 100644 --- a/keyboards/hadron/ver3/keymaps/default/keymap.c +++ b/keyboards/hadron/ver3/keymaps/default/keymap.c @@ -175,19 +175,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Adjust (Lower + Raise) * ,------+------+------+------+------+------------------------------------------------. - * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * | Reset|HPT TG|HPT FB|HPT M+|HPT M-|HPT RS| | | | | |EEP RS| * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. - * | Reset|RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | | | | Del | + * | |RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | | | | Del | * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| * | | | |Aud on|Audoff|AGnorm| | | |AGswap|Qwerty|Colemk| | | | * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | |Voice-|Voice+|Mus on|Musoff| | | | | | | | BL + |BL ST |BL TG | + * | |Voice-|Voice+|Mus on|Musoff| | | | | | |BL - | BL + |BL ST |BL TG | * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | | | | | + * | | | | | | | | | | | |CK RS |CK - |CK + |CK TG | * `--------------------------------------------------------------------------------------------------------' */ [_ADJUST] = LAYOUT( - RESET, HPT_TOG, HPT_FBK, HPT_MODI, HPT_MODD, HPT_RST , _______, _______, _______, _______, _______, _______, \ + RESET, HPT_TOG, HPT_FBK, HPT_MODI, HPT_MODD, HPT_RST , _______, _______, _______, _______, _______, EEP_RST, \ _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, KC_DEL, \ _______, _______, _______, AU_ON, AU_OFF, AG_NORM, _______, _______, _______, AG_SWAP, QWERTY, COLEMAK, _______, _______, _______, \ _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, BL_DEC, BL_INC, BL_STEP, BL_TOGG, \ diff --git a/keyboards/hadron/ver3/keymaps/ishtob/keymap.c b/keyboards/hadron/ver3/keymaps/ishtob/keymap.c index 140d148b7e..51062acc22 100644 --- a/keyboards/hadron/ver3/keymaps/ishtob/keymap.c +++ b/keyboards/hadron/ver3/keymaps/ishtob/keymap.c @@ -153,19 +153,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Adjust (Lower + Raise) * ,------+------+------+------+------+------------------------------------------------. - * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + * | Reset|HPT TG|HPT FB|HPT M+|HPT M-|HPT RS| | | | | |EEP RS| * |------+------+------+------+------+------+------+------+------+------+------+------+--------------------. - * | Reset|RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | | | | Del | + * | |RGB TG|RGB ST|RGBH -|RGBH +|RGBS -|RGBS +|RGBV -|RGBV +| | | | | | Del | * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| * | | | |Aud on|Audoff|AGnorm| | | |AGswap|Qwerty|Colemk| | | | * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | |Voice-|Voice+|Mus on|Musoff| | | | | | | | BL + |BL ST |BL TG | + * | |Voice-|Voice+|Mus on|Musoff| | | | | | |BL - | BL + |BL ST |BL TG | * |------+------+------+------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | | | | | + * | | | | | | | | | | | |CK RS |CK - |CK + |CK TG | * `--------------------------------------------------------------------------------------------------------' */ [_ADJUST] = LAYOUT_wrapper( - _______, HPT_TOG, HPT_FBK, HPT_MODI, HPT_MODD, HPT_RST, _______, _______, _______, _______, _______, _______, \ + _______, HPT_TOG, HPT_FBK, HPT_MODI, HPT_MODD, HPT_RST, _______, _______, _______, _______, _______, EEP_RST, \ RESET, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, KC_DEL, \ _______, MAGIC_TOGGLE_NKRO, _______, AU_ON, AU_OFF, AG_NORM, _______, _______, _______, AG_SWAP, QWERTY, COLEMAK, _______, _______, _______, \ _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, BL_DEC, BL_INC, BL_STEP, BL_TOGG, \ diff --git a/keyboards/hadron/ver3/keymaps/readme.md b/keyboards/hadron/ver3/keymaps/readme.md index 54fb5f6d9e..66bf06b711 100644 --- a/keyboards/hadron/ver3/keymaps/readme.md +++ b/keyboards/hadron/ver3/keymaps/readme.md @@ -17,7 +17,8 @@ When adding your keymap to this list, keep it organised alphabetically (select l * **folder_name** description -# List of Planck keymaps +# List of Hadron keymaps -* **default** default Planck layout -* **cbbrowne** cbbrowne's Planck layout
\ No newline at end of file +* **default** default Hadron layout +* **ishtob** ishtob's Hadron layout +* **sebaslayout** sebaslayout's Hadron layout
\ No newline at end of file diff --git a/keyboards/hadron/ver3/matrix.c b/keyboards/hadron/ver3/matrix.c deleted file mode 100644 index 329d1328ab..0000000000 --- a/keyboards/hadron/ver3/matrix.c +++ /dev/null @@ -1,195 +0,0 @@ -#include <string.h> -#include "hal.h" -#include "timer.h" -#include "wait.h" -#include "printf.h" -#include "backlight.h" -#include "matrix.h" -#include "action.h" -#include "keycode.h" - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_COLS]; -static bool debouncing = false; -static uint16_t debouncing_time = 0; - -static uint8_t encoder_state = 0; -static int8_t encoder_value = 0; -static int8_t encoder_LUT[] = { 0, -1, 1, 0, 1, 0, 0, -1, -1, 0, 0, 1, 0, 1, -1, 0 }; - -__attribute__ ((weak)) -void matrix_init_user(void) {} - -__attribute__ ((weak)) -void matrix_scan_user(void) {} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -void matrix_init(void) { - printf("matrix init\n"); - //debug_matrix = true; - - // encoder setup - palSetPadMode(GPIOB, 13, PAL_MODE_INPUT_PULLUP); - palSetPadMode(GPIOB, 14, PAL_MODE_INPUT_PULLUP); - - encoder_state = (palReadPad(GPIOB, 13) << 0) | (palReadPad(GPIOB, 14) << 1); - - // actual matrix setup - palSetPadMode(GPIOB, 8, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 10, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOA, 0, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOA, 1, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOA, 2, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 0, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOA, 3, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 1, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOA, 6, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOA, 7, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOC, 13, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 11, PAL_MODE_OUTPUT_PUSHPULL); - palSetPadMode(GPIOB, 9, PAL_MODE_OUTPUT_PUSHPULL); - - palSetPadMode(GPIOC, 15, PAL_MODE_INPUT_PULLDOWN); - palSetPadMode(GPIOC, 14, PAL_MODE_INPUT_PULLDOWN); - palSetPadMode(GPIOA, 10, PAL_MODE_INPUT_PULLDOWN); - palSetPadMode(GPIOA, 9, PAL_MODE_INPUT_PULLDOWN); - palSetPadMode(GPIOA, 8, PAL_MODE_INPUT_PULLDOWN); - - - memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t)); - memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_row_t)); - - - matrix_init_quantum(); -} - -__attribute__ ((weak)) -void encoder_update(bool clockwise) { } - -#ifndef ENCODER_RESOLUTION - #define ENCODER_RESOLUTION 4 -#endif - -uint8_t matrix_scan(void) { - // encoder on B13 and B14 - encoder_state <<= 2; - encoder_state |= (palReadPad(GPIOB, 13) << 0) | (palReadPad(GPIOB, 14) << 1); - encoder_value += encoder_LUT[encoder_state & 0xF]; - if (encoder_value >= ENCODER_RESOLUTION) { - encoder_update(0); - } - if (encoder_value <= -ENCODER_RESOLUTION) { // direction is arbitrary here, but this clockwise - encoder_update(1); - } - encoder_value %= ENCODER_RESOLUTION; - - // actual matrix - for (int col = 0; col < MATRIX_COLS; col++) { - matrix_row_t data = 0; - - // strobe col { PB8, PB2, PB10, PA0, PA1, PA2, PB0, PA3, PB1, PA6, PA7, PB1, PA6, PA7, PB12, PC3, PB11, } - switch (col) { - case 0: palSetPad(GPIOB, 8); break; - case 1: palSetPad(GPIOB, 2); break; - case 2: palSetPad(GPIOB, 10); break; - case 3: palSetPad(GPIOA, 0); break; - case 4: palSetPad(GPIOA, 1); break; - case 5: palSetPad(GPIOA, 2); break; - case 6: palSetPad(GPIOB, 0); break; - case 7: palSetPad(GPIOA, 3); break; - case 8: palSetPad(GPIOB, 1); break; - case 9: palSetPad(GPIOA, 6); break; - case 10: palSetPad(GPIOA, 7); break; - case 11: palSetPad(GPIOB, 12); break; - case 12: palSetPad(GPIOC, 13); break; - case 13: palSetPad(GPIOB, 11); break; - case 14: palSetPad(GPIOB, 9); break; - } - - // need wait to settle pin state - wait_us(20); - - // read row data { PC15, PC14, PA10, PA9, PA8 } - data = ( - (palReadPad(GPIOC, 15) << 0 ) | - (palReadPad(GPIOC, 14) << 1 ) | - (palReadPad(GPIOA, 10) << 2 ) | - (palReadPad(GPIOA, 9) << 3 ) | - (palReadPad(GPIOA, 8) << 4 ) - ); - - // unstrobe col { PB8, PB2, PB10, PA0, PA1, PA2, PB0, PA3, PB1, PA6, PA7, PB1, PA6, PA7, PB12, PC3, PB11, } - switch (col) { - case 0: palClearPad(GPIOB, 8); break; - case 1: palClearPad(GPIOB, 2); break; - case 2: palClearPad(GPIOB, 10); break; - case 3: palClearPad(GPIOA, 0); break; - case 4: palClearPad(GPIOA, 1); break; - case 5: palClearPad(GPIOA, 2); break; - case 6: palClearPad(GPIOB, 0); break; - case 7: palClearPad(GPIOA, 3); break; - case 8: palClearPad(GPIOB, 1); break; - case 9: palClearPad(GPIOA, 6); break; - case 10: palClearPad(GPIOA, 7); break; - case 11: palClearPad(GPIOB, 12); break; - case 12: palClearPad(GPIOC, 13); break; - case 13: palClearPad(GPIOB, 11); break; - case 14: palClearPad(GPIOB, 9); break; - } - - if (matrix_debouncing[col] != data) { - matrix_debouncing[col] = data; - debouncing = true; - debouncing_time = timer_read(); - } - } - - if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) { - for (int row = 0; row < MATRIX_ROWS; row++) { - matrix[row] = 0; - for (int col = 0; col < MATRIX_COLS; col++) { - matrix[row] |= ((matrix_debouncing[col] & (1 << row) ? 1 : 0) << col); - } - } - debouncing = false; - } - - matrix_scan_quantum(); - - return 1; -} - -bool matrix_is_on(uint8_t row, uint8_t col) { - return (matrix[row] & (1<<col)); -} - -matrix_row_t matrix_get_row(uint8_t row) { - return matrix[row]; -} - -void matrix_print(void) { - printf("\nr/c 01234567\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - printf("%X0: ", row); - matrix_row_t data = matrix_get_row(row); - for (int col = 0; col < MATRIX_COLS; col++) { - if (data & (1<<col)) - printf("1"); - else - printf("0"); - } - printf("\n"); - } -} diff --git a/keyboards/hadron/ver3/mcuconf.h b/keyboards/hadron/ver3/mcuconf.h index d0776b0463..94d761cfba 100644 --- a/keyboards/hadron/ver3/mcuconf.h +++ b/keyboards/hadron/ver3/mcuconf.h @@ -225,7 +225,7 @@ * ST driver system settings. */ #define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 +#define STM32_ST_USE_TIMER 3 /* * UART driver system settings. diff --git a/keyboards/hadron/ver3/rules.mk b/keyboards/hadron/ver3/rules.mk index 2a86623157..599fb53fae 100644 --- a/keyboards/hadron/ver3/rules.mk +++ b/keyboards/hadron/ver3/rules.mk @@ -1,57 +1,25 @@ -# project specific files -SRC = matrix.c - -## chip/board settings -# - the next two should match the directories in -# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) -MCU_FAMILY = STM32 -MCU_SERIES = STM32F3xx - -# Linker script to use -# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ -# or <this_dir>/ld/ -MCU_LDSCRIPT = STM32F303xC - -# Startup code to use -# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ -MCU_STARTUP = stm32f3xx - -# Board: it should exist either in <chibios>/os/hal/boards/ -# or <this_dir>/boards -BOARD = GENERIC_STM32_F303XC +# projecct specific files # Cortex version -MCU = cortex-m4 - -# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 -ARMV = 7 - -USE_FPU = yes - -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB -# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000 -OPT_DEFS = - -# Options to pass to dfu-util when flashing -DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave +MCU = STM32F303 # Build Options # comment out to disable the options. # BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration +COMMAND_ENABLE = yes # Commands for debug and configuration #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover -CUSTOM_MATRIX = yes # Custom matrix file +CUSTOM_MATRIX = no # Custom matrix file AUDIO_ENABLE = yes RGBLIGHT_ENABLE = no +RGB_MATRIX_ENABLE = no #WS2812 once arm_rgb is implemented HAPTIC_ENABLE += DRV2605L QWIIC_ENABLE += MICRO_OLED +ENCODER_ENABLER = yes # SERIAL_LINK_ENABLE = yes diff --git a/keyboards/hadron/ver3/ver3.c b/keyboards/hadron/ver3/ver3.c index 37169fe2f3..e99ed11a77 100644 --- a/keyboards/hadron/ver3/ver3.c +++ b/keyboards/hadron/ver3/ver3.c @@ -16,9 +16,36 @@ #include "ver3.h" #include "qwiic.h" #include "action_layer.h" -#include "matrix.h" #include "haptic.h" +#ifdef RGB_MATRIX_ENABLE +#include "rgblight.h" + +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + /*{row | col << 4} + | {x=0..224, y=0..64} + | | modifier + | | | */ + {{1|(13<<4)}, {195, 3}, 0}, + {{4|(13<<4)}, {195, 16}, 0}, + {{4|(10<<4)}, {150, 16}, 0}, + {{4|(7<<4)}, {105, 16}, 0}, + {{4|(4<<4)}, {60, 16}, 0}, + {{4|(1<<4)}, {15, 16}, 0}, + {{1|(1<<4)}, {15, 3}, 0}, + {{1|(4<<4)}, {60, 3}, 0}, + {{1|(7<<4)}, {105, 3}, 0}, + {{1|(10<<4)}, {150, 3}, 0} +}; + +#endif + +uint8_t *o_fb; + +uint16_t counterst = 0; + + + #ifdef QWIIC_MICRO_OLED_ENABLE /* screen off after this many milliseconds */ @@ -41,7 +68,7 @@ void draw_ui(void) { send_command(DISPLAYON); /* Layer indicator is 41 x 10 pixels */ -#define LAYER_INDICATOR_X 0 +#define LAYER_INDICATOR_X 5 #define LAYER_INDICATOR_Y 0 draw_string(LAYER_INDICATOR_X + 1, LAYER_INDICATOR_Y + 2, "LAYER", PIXEL_ON, NORM, 0); @@ -49,7 +76,7 @@ void draw_ui(void) { draw_char(LAYER_INDICATOR_X + 34, LAYER_INDICATOR_Y + 2, layer + 0x30, PIXEL_ON, XOR, 0); /* Matrix display is 19 x 9 pixels */ -#define MATRIX_DISPLAY_X 0 +#define MATRIX_DISPLAY_X 5 #define MATRIX_DISPLAY_Y 18 for (uint8_t x = 0; x < MATRIX_ROWS; x++) { @@ -184,5 +211,10 @@ if (queue_for_send) { send_command(DISPLAYOFF); /* 0xAE */ } #endif + if (counterst == 0) { + //testPatternFB(o_fb); + } + counterst = (counterst + 1) % 1024; + //rgblight_task(); matrix_scan_user(); } diff --git a/keyboards/hadron/ver3/ver3.h b/keyboards/hadron/ver3/ver3.h index 516f7b9a1b..95926469bf 100644 --- a/keyboards/hadron/ver3/ver3.h +++ b/keyboards/hadron/ver3/ver3.h @@ -1,4 +1,4 @@ -/* Copyright 2018 Jack Humbert <jack.humb@gmail.com> +/* Copyright 2018 ishtob * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -13,9 +13,6 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef VER3_H -#define VER3_H +#pragma once -#include "hadron.h" - -#endif
\ No newline at end of file +#include "hadron.h"
\ No newline at end of file |