Move converter specific tmk_core protocols (#14743)

6 files changed, 0 insertions, 1544 deletions

diff --git a/tmk_core/protocol/adb.c b/tmk_core/protocol/adb.c
deleted file mode 100644
index 367f1b09fa..0000000000
--- a/tmk_core/protocol/adb.c
+++ /dev/null
@@ -1,535 +0,0 @@
-/*
-Copyright 2011-19 Jun WAKO <wakojun@gmail.com>
-Copyright 2013 Shay Green <gblargg@gmail.com>
-
-This software is licensed with a Modified BSD License.
-All of this is supposed to be Free Software, Open Source, DFSG-free,
-GPL-compatible, and OK to use in both free and proprietary applications.
-Additions and corrections to this file are welcome.
-
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright
-  notice, this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
-  notice, this list of conditions and the following disclaimer in
-  the documentation and/or other materials provided with the
-  distribution.
-
-* Neither the name of the copyright holders nor the names of
-  contributors may be used to endorse or promote products derived
-  from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#include <stdbool.h>
-#include <util/delay.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include "adb.h"
-#include "print.h"
-
-// GCC doesn't inline functions normally
-#define data_lo() (ADB_DDR |= (1 << ADB_DATA_BIT))
-#define data_hi() (ADB_DDR &= ~(1 << ADB_DATA_BIT))
-#define data_in() (ADB_PIN & (1 << ADB_DATA_BIT))
-
-#ifdef ADB_PSW_BIT
-static inline void psw_lo(void);
-static inline void psw_hi(void);
-static inline bool psw_in(void);
-#endif
-
-static inline void     attention(void);
-static inline void     place_bit0(void);
-static inline void     place_bit1(void);
-static inline void     send_byte(uint8_t data);
-static inline uint16_t wait_data_lo(uint16_t us);
-static inline uint16_t wait_data_hi(uint16_t us);
-
-void adb_host_init(void) {
-    ADB_PORT &= ~(1 << ADB_DATA_BIT);
-    data_hi();
-#ifdef ADB_PSW_BIT
-    psw_hi();
-#endif
-}
-
-#ifdef ADB_PSW_BIT
-bool adb_host_psw(void) { return psw_in(); }
-#endif
-
-/*
- * Don't call this in a row without the delay, otherwise it makes some of poor controllers
- * overloaded and misses strokes. Recommended interval is 12ms.
- *
- * Thanks a lot, blargg!
- * <http://geekhack.org/index.php?topic=14290.msg1068919#msg1068919>
- * <http://geekhack.org/index.php?topic=14290.msg1070139#msg1070139>
- */
-uint16_t adb_host_kbd_recv(void) { return adb_host_talk(ADB_ADDR_KEYBOARD, ADB_REG_0); }
-
-#ifdef ADB_MOUSE_ENABLE
-__attribute__((weak)) void adb_mouse_init(void) { return; }
-
-__attribute__((weak)) void adb_mouse_task(void) { return; }
-
-uint16_t adb_host_mouse_recv(void) { return adb_host_talk(ADB_ADDR_MOUSE, ADB_REG_0); }
-#endif
-
-// This sends Talk command to read data from register and returns length of the data.
-uint8_t adb_host_talk_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len) {
-    for (int8_t i = 0; i < len; i++) buf[i] = 0;
-
-    cli();
-    attention();
-    send_byte((addr << 4) | ADB_CMD_TALK | reg);
-    place_bit0();  // Stopbit(0)
-    // TODO: Service Request(Srq):
-    // Device holds low part of comannd stopbit for 140-260us
-    //
-    // Command:
-    // ......._     ______________________    ___ ............_     -------
-    //         |   |                      |  |   |             |   |
-    // Command |   |                      |  |   | Data bytes  |   |
-    // ........|___|  |     140-260       |__|   |_............|___|
-    //         |stop0 | Tlt Stop-to-Start |start1|             |stop0 |
-    //
-    // Command without data:
-    // ......._     __________________________
-    //         |   |
-    // Command |   |
-    // ........|___|  |     140-260       |
-    //         |stop0 | Tlt Stop-to-Start |
-    //
-    // Service Request:
-    // ......._                     ______    ___ ............_     -------
-    //         |     140-260       |      |  |   |             |   |
-    // Command |  Service Request  |      |  |   | Data bytes  |   |
-    // ........|___________________|      |__|   |_............|___|
-    //         |stop0 |                   |start1|             |stop0 |
-    // ......._                     __________
-    //         |     140-260       |
-    // Command |  Service Request  |
-    // ........|___________________|
-    //         |stop0 |
-    // This can be happened?
-    // ......._     ______________________    ___ ............_                   -----
-    //         |   |                      |  |   |             |    140-260      |
-    // Command |   |                      |  |   | Data bytes  | Service Request |
-    // ........|___|  |     140-260       |__|   |_............|_________________|
-    //         |stop0 | Tlt Stop-to-Start |start1|             |stop0 |
-    //
-    // "Service requests are issued by the devices during a very specific time at the
-    // end of the reception of the command packet.
-    // If a device in need of service issues a service request, it must do so within
-    // the 65 µs of the Stop Bit’s low time and maintain the line low for a total of 300 µs."
-    //
-    // "A device sends a Service Request signal by holding the bus low during the low
-    // portion of the stop bit of any command or data transaction. The device must lengthen
-    // the stop by a minimum of 140 J.lS beyond its normal duration, as shown in Figure 8-15."
-    // http://ww1.microchip.com/downloads/en/AppNotes/00591b.pdf
-    if (!wait_data_hi(500)) {  // Service Request(310us Adjustable Keyboard): just ignored
-        xprintf("R");
-        sei();
-        return 0;
-    }
-    if (!wait_data_lo(500)) {  // Tlt/Stop to Start(140-260us)
-        sei();
-        return 0;  // No data from device(not error);
-    }
-
-    // start bit(1)
-    if (!wait_data_hi(40)) {
-        xprintf("S");
-        sei();
-        return 0;
-    }
-    if (!wait_data_lo(100)) {
-        xprintf("s");
-        sei();
-        return 0;
-    }
-
-    uint8_t n = 0;  // bit count
-    do {
-        //
-        // |<- bit_cell_max(130) ->|
-        // |        |<-   lo     ->|
-        // |        |       |<-hi->|
-        //           _______
-        // |        |       |
-        // | 130-lo | lo-hi |
-        // |________|       |
-        //
-        uint8_t lo = (uint8_t)wait_data_hi(130);
-        if (!lo) goto error;  // no more bit or after stop bit
-
-        uint8_t hi = (uint8_t)wait_data_lo(lo);
-        if (!hi) goto error;  // stop bit extedned by Srq?
-
-        if (n / 8 >= len) continue;  // can't store in buf
-
-        buf[n / 8] <<= 1;
-        if ((130 - lo) < (lo - hi)) {
-            buf[n / 8] |= 1;
-        }
-    } while (++n);
-
-error:
-    sei();
-    return n / 8;
-}
-
-uint16_t adb_host_talk(uint8_t addr, uint8_t reg) {
-    uint8_t len;
-    uint8_t buf[8];
-    len = adb_host_talk_buf(addr, reg, buf, 8);
-    if (len != 2) return 0;
-    return (buf[0] << 8 | buf[1]);
-}
-
-void adb_host_listen_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len) {
-    cli();
-    attention();
-    send_byte((addr << 4) | ADB_CMD_LISTEN | reg);
-    place_bit0();  // Stopbit(0)
-    // TODO: Service Request
-    _delay_us(200);  // Tlt/Stop to Start
-    place_bit1();    // Startbit(1)
-    for (int8_t i = 0; i < len; i++) {
-        send_byte(buf[i]);
-        // xprintf("%02X ", buf[i]);
-    }
-    place_bit0();  // Stopbit(0);
-    sei();
-}
-
-void adb_host_listen(uint8_t addr, uint8_t reg, uint8_t data_h, uint8_t data_l) {
-    uint8_t buf[2] = {data_h, data_l};
-    adb_host_listen_buf(addr, reg, buf, 2);
-}
-
-void adb_host_flush(uint8_t addr) {
-    cli();
-    attention();
-    send_byte((addr << 4) | ADB_CMD_FLUSH);
-    place_bit0();    // Stopbit(0)
-    _delay_us(200);  // Tlt/Stop to Start
-    sei();
-}
-
-// send state of LEDs
-void adb_host_kbd_led(uint8_t led) {
-    // Listen Register2
-    //  upper byte: not used
-    //  lower byte: bit2=ScrollLock, bit1=CapsLock, bit0=NumLock
-    adb_host_listen(ADB_ADDR_KEYBOARD, ADB_REG_2, 0, led & 0x07);
-}
-
-#ifdef ADB_PSW_BIT
-static inline void psw_lo() {
-    ADB_DDR |= (1 << ADB_PSW_BIT);
-    ADB_PORT &= ~(1 << ADB_PSW_BIT);
-}
-static inline void psw_hi() {
-    ADB_PORT |= (1 << ADB_PSW_BIT);
-    ADB_DDR &= ~(1 << ADB_PSW_BIT);
-}
-static inline bool psw_in() {
-    ADB_PORT |= (1 << ADB_PSW_BIT);
-    ADB_DDR &= ~(1 << ADB_PSW_BIT);
-    return ADB_PIN & (1 << ADB_PSW_BIT);
-}
-#endif
-
-static inline void attention(void) {
-    data_lo();
-    _delay_us(800 - 35);  // bit1 holds lo for 35 more
-    place_bit1();
-}
-
-static inline void place_bit0(void) {
-    data_lo();
-    _delay_us(65);
-    data_hi();
-    _delay_us(35);
-}
-
-static inline void place_bit1(void) {
-    data_lo();
-    _delay_us(35);
-    data_hi();
-    _delay_us(65);
-}
-
-static inline void send_byte(uint8_t data) {
-    for (int i = 0; i < 8; i++) {
-        if (data & (0x80 >> i))
-            place_bit1();
-        else
-            place_bit0();
-    }
-}
-
-// These are carefully coded to take 6 cycles of overhead.
-// inline asm approach became too convoluted
-static inline uint16_t wait_data_lo(uint16_t us) {
-    do {
-        if (!data_in()) break;
-        _delay_us(1 - (6 * 1000000.0 / F_CPU));
-    } while (--us);
-    return us;
-}
-
-static inline uint16_t wait_data_hi(uint16_t us) {
-    do {
-        if (data_in()) break;
-        _delay_us(1 - (6 * 1000000.0 / F_CPU));
-    } while (--us);
-    return us;
-}
-
-/*
-ADB Protocol
-============
-
-Resources
----------
-ADB - The Untold Story: Space Aliens Ate My Mouse
-    http://developer.apple.com/legacy/mac/library/#technotes/hw/hw_01.html
-ADB Manager
-    http://developer.apple.com/legacy/mac/library/documentation/mac/pdf/Devices/ADB_Manager.pdf
-    Service request(5-17)
-Apple IIgs Hardware Reference Second Edition [Chapter6 p121]
-    ftp://ftp.apple.asimov.net/pub/apple_II/documentation/Apple%20IIgs%20Hardware%20Reference.pdf
-ADB Keycode
-    http://72.0.193.250/Documentation/macppc/adbkeycodes/
-    http://m0115.web.fc2.com/m0115.jpg
-    [Inside Macintosh volume V, pages 191-192]
-    http://www.opensource.apple.com/source/IOHIDFamily/IOHIDFamily-421.18.3/IOHIDFamily/Cosmo_USB2ADB.c
-ADB Signaling
-    http://kbdbabel.sourceforge.net/doc/kbd_signaling_pcxt_ps2_adb.pdf
-ADB Overview & History
-    http://en.wikipedia.org/wiki/Apple_Desktop_Bus
-Microchip Application Note: ADB device(with code for PIC16C)
-    http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1824&appnote=en011062
-AVR ATtiny2131 ADB to PS/2 converter(Japanese)
-    http://hp.vector.co.jp/authors/VA000177/html/KeyBoardA5DEA5CBA5A2II.html
-
-
-Pinouts
--------
-    ADB female socket from the front:
-    __________
-    |        | <--- top
-    | 4o  o3 |
-    |2o    o1|
-    |   ==   |
-    |________| <--- bottom
-      |    |   <--- 4pins
-
-
-    ADB female socket from bottom:
-
-    ========== <--- front
-    |        |
-    |        |
-    |2o    o1|
-    |4o    o3|
-    ---------- <--- back
-
-    1: Data
-    2: Power SW(low when press Power key)
-    3: Vcc(5V)
-    4: GND
-
-
-Commands
---------
-    ADB command is 1byte and consists of 4bit-address, 2bit-command
-    type and 2bit-register. The commands are always sent by Host.
-
-    Command format:
-    7 6 5 4 3 2 1 0
-    | | | |------------ address
-            | |-------- command type
-                | |---- register
-
-    bits                commands
-    ------------------------------------------------------
-    - - - - 0 0 0 0     Send Reset(reset all devices)
-    A A A A 0 0 0 1     Flush(reset a device)
-    - - - - 0 0 1 0     Reserved
-    - - - - 0 0 1 1     Reserved
-    - - - - 0 1 - -     Reserved
-    A A A A 1 0 R R     Listen(write to a device)
-    A A A A 1 1 R R     Talk(read from a device)
-
-    The command to read keycodes from keyboard is 0x2C which
-    consist of keyboard address 2 and Talk against register 0.
-
-    Address:
-    2:  keyboard
-    3:  mice
-
-    Registers:
-    0: application(keyboard uses this to store its data.)
-    1: application
-    2: application(keyboard uses this for LEDs and state of modifiers)
-    3: status and command
-
-
-Communication
--------------
-    This is a minimum information for keyboard communication.
-    See "Resources" for detail.
-
-    Signaling:
-
-    ~~~~____________~~||||||||||||__~~~~~_~~|||||||||||||||__~~~~
-
-        |800us     |  |7 Command 0|  |   |  |15-64  Data  0|Stopbit(0)
-        +Attention |              |  |   +Startbit(1)
-                   +Startbit(1)   |  +Tlt(140-260us)
-                                  +stopbit(0)
-
-    Bit cells:
-
-    bit0: ______~~~
-          65    :35us
-
-    bit1: ___~~~~~~
-          35 :65us
-
-    bit0 low time: 60-70% of bit cell(42-91us)
-    bit1 low time: 30-40% of bit cell(21-52us)
-    bit cell time: 70-130us
-    [from Apple IIgs Hardware Reference Second Edition]
-
-    Criterion for bit0/1:
-    After 55us if line is low/high then bit is 0/1.
-
-    Attention & start bit:
-    Host asserts low in 560-1040us then places start bit(1).
-
-    Tlt(Stop to Start):
-    Bus stays high in 140-260us then device places start bit(1).
-
-    Global reset:
-    Host asserts low in 2.8-5.2ms. All devices are forced to reset.
-
-    Service request from device(Srq):
-    Device can request to send at commad(Global only?) stop bit.
-    Requesting device keeps low for 140-260us at stop bit of command.
-
-
-Keyboard Data(Register0)
-    This 16bit data can contains two keycodes and two released flags.
-    First keycode is palced in upper byte. When one keyocode is sent,
-    lower byte is 0xFF.
-    Release flag is 1 when key is released.
-
-    1514 . . . . . 8 7 6 . . . . . 0
-     | | | | | | | | | +-+-+-+-+-+-+-   Keycode2
-     | | | | | | | | +---------------   Released2(1 when the key is released)
-     | +-+-+-+-+-+-+-----------------   Keycode1
-     +-------------------------------   Released1(1 when the key is released)
-
-    Keycodes:
-    Scancode consists of 7bit keycode and 1bit release flag.
-    Device can send two keycodes at once. If just one keycode is sent
-    keycode1 contains it and keyocode2 is 0xFF.
-
-    Power switch:
-    You can read the state from PSW line(active low) however
-    the switch has a special scancode 0x7F7F, so you can
-    also read from Data line. It uses 0xFFFF for release scancode.
-
-Keyboard LEDs & state of keys(Register2)
-    This register hold current state of three LEDs and nine keys.
-    The state of LEDs can be changed by sending Listen command.
-
-    1514 . . . . . . 7 6 5 . 3 2 1 0
-     | | | | | | | | | | | | | | | +-   LED1(NumLock)
-     | | | | | | | | | | | | | | +---   LED2(CapsLock)
-     | | | | | | | | | | | | | +-----   LED3(ScrollLock)
-     | | | | | | | | | | +-+-+-------   Reserved
-     | | | | | | | | | +-------------   ScrollLock
-     | | | | | | | | +---------------   NumLock
-     | | | | | | | +-----------------   Apple/Command
-     | | | | | | +-------------------   Option
-     | | | | | +---------------------   Shift
-     | | | | +-----------------------   Control
-     | | | +-------------------------   Reset/Power
-     | | +---------------------------   CapsLock
-     | +-----------------------------   Delete
-     +-------------------------------   Reserved
-
-Address, Handler ID and bits(Register3)
-    1514131211 . . 8 7 . . . . . . 0
-     | | | | | | | | | | | | | | | |
-     | | | | | | | | +-+-+-+-+-+-+-+-   Handler ID
-     | | | | +-+-+-+-----------------   Address
-     | | | +-------------------------   0
-     | | +---------------------------   Service request enable(1 = enabled)
-     | +-----------------------------   Exceptional event(alwyas 1 if not used)
-     +-------------------------------   0
-
-ADB Bit Cells
-    bit cell time: 70-130us
-    low part of bit0: 60-70% of bit cell
-    low part of bit1: 30-40% of bit cell
-
-       bit cell time         70us        130us
-       --------------------------------------------
-       low  part of bit0     42-49       78-91
-       high part of bit0     21-28       39-52
-       low  part of bit1     21-28       39-52
-       high part of bit1     42-49       78-91
-
-
-    bit0:
-       70us bit cell:
-         ____________~~~~~~
-         42-49        21-28
-
-       130us bit cell:
-         ____________~~~~~~
-         78-91        39-52
-
-    bit1:
-       70us bit cell:
-         ______~~~~~~~~~~~~
-         21-28        42-49
-
-       130us bit cell:
-         ______~~~~~~~~~~~~
-         39-52        78-91
-
-    [from Apple IIgs Hardware Reference Second Edition]
-
-Keyboard Handle ID
-    Apple Standard Keyboard M0116:      0x01
-    Apple Extended Keyboard M0115:      0x02
-    Apple Extended Keyboard II M3501:   0x02
-    Apple Adjustable Keybaord:          0x10
-
-    http://lxr.free-electrons.com/source/drivers/macintosh/adbhid.c?v=4.4#L802
-
-END_OF_ADB
-*/
diff --git a/tmk_core/protocol/adb.h b/tmk_core/protocol/adb.h
deleted file mode 100644
index fe8becc2d5..0000000000
--- a/tmk_core/protocol/adb.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
-Copyright 2011-19 Jun WAKO <wakojun@gmail.com>
-
-This software is licensed with a Modified BSD License.
-All of this is supposed to be Free Software, Open Source, DFSG-free,
-GPL-compatible, and OK to use in both free and proprietary applications.
-Additions and corrections to this file are welcome.
-
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright
-  notice, this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
-  notice, this list of conditions and the following disclaimer in
-  the documentation and/or other materials provided with the
-  distribution.
-
-* Neither the name of the copyright holders nor the names of
-  contributors may be used to endorse or promote products derived
-  from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-*/
-
-#pragma once
-
-#include <stdint.h>
-#include <stdbool.h>
-
-#if !(defined(ADB_PORT) && defined(ADB_PIN) && defined(ADB_DDR) && defined(ADB_DATA_BIT))
-#    error "ADB port setting is required in config.h"
-#endif
-
-#define ADB_POWER 0x7F
-#define ADB_CAPS 0x39
-
-/* ADB commands */
-// Default Address
-#define ADB_ADDR_0 0
-#define ADB_ADDR_DONGLE 1
-#define ADB_ADDR_KEYBOARD 2
-#define ADB_ADDR_MOUSE 3
-#define ADB_ADDR_TABLET 4
-#define ADB_ADDR_APPLIANCE 7
-#define ADB_ADDR_8 8
-#define ADB_ADDR_9 9
-#define ADB_ADDR_10 10
-#define ADB_ADDR_11 11
-#define ADB_ADDR_12 12
-#define ADB_ADDR_13 13
-#define ADB_ADDR_14 14
-#define ADB_ADDR_15 15
-// for temporary purpose, do not use for polling
-#define ADB_ADDR_TMP 15
-#define ADB_ADDR_MOUSE_POLL 10
-// Command Type
-#define ADB_CMD_RESET 0
-#define ADB_CMD_FLUSH 1
-#define ADB_CMD_LISTEN 8
-#define ADB_CMD_TALK 12
-// Register
-#define ADB_REG_0 0
-#define ADB_REG_1 1
-#define ADB_REG_2 2
-#define ADB_REG_3 3
-
-/* ADB keyboard handler id */
-#define ADB_HANDLER_STD 0x01        /* IIGS, M0116 */
-#define ADB_HANDLER_AEK 0x02        /* M0115, M3501 */
-#define ADB_HANDLER_AEK_RMOD 0x03   /* M0115, M3501, alternate mode enableing right modifiers */
-#define ADB_HANDLER_STD_ISO 0x04    /* M0118, ISO swapping keys */
-#define ADB_HANDLER_AEK_ISO 0x05    /* M0115, M3501, ISO swapping keys */
-#define ADB_HANDLER_M1242_ANSI 0x10 /* Adjustable keyboard */
-#define ADB_HANDLER_CLASSIC1_MOUSE 0x01
-#define ADB_HANDLER_CLASSIC2_MOUSE 0x02
-#define ADB_HANDLER_EXTENDED_MOUSE 0x04
-#define ADB_HANDLER_TURBO_MOUSE 0x32
-
-// ADB host
-void     adb_host_init(void);
-bool     adb_host_psw(void);
-uint16_t adb_host_talk(uint8_t addr, uint8_t reg);
-uint8_t  adb_host_talk_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len);
-void     adb_host_listen(uint8_t addr, uint8_t reg, uint8_t data_h, uint8_t data_l);
-void     adb_host_listen_buf(uint8_t addr, uint8_t reg, uint8_t *buf, uint8_t len);
-void     adb_host_flush(uint8_t addr);
-void     adb_host_kbd_led(uint8_t led);
-uint16_t adb_host_kbd_recv(void);
-uint16_t adb_host_mouse_recv(void);
-
-// ADB Mouse
-void adb_mouse_task(void);
-void adb_mouse_init(void);
diff --git a/tmk_core/protocol/m0110.c b/tmk_core/protocol/m0110.c
deleted file mode 100644
index 64f2fa50ab..0000000000
--- a/tmk_core/protocol/m0110.c
+++ /dev/null
@@ -1,583 +0,0 @@
-/*
-Copyright 2011,2012 Jun WAKO <wakojun@gmail.com>
-
-This software is licensed with a Modified BSD License.
-All of this is supposed to be Free Software, Open Source, DFSG-free,
-GPL-compatible, and OK to use in both free and proprietary applications.
-Additions and corrections to this file are welcome.
-
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright
-  notice, this list of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright
-  notice, this list of conditions and the following disclaimer in
-  the documentation and/or other materials provided with the
-  distribution.
-
-* Neither the name of the copyright holders nor the names of
-  contributors may be used to endorse or promote products derived
-  from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-*/
-/* M0110A Support was contributed by skagon@github */
-
-#include <stdbool.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include "m0110.h"
-#include "debug.h"
-
-static inline uint8_t  raw2scan(uint8_t raw);
-static inline uint8_t  inquiry(void);
-static inline uint8_t  instant(void);
-static inline void     clock_lo(void);
-static inline void     clock_hi(void);
-static inline bool     clock_in(void);
-static inline void     data_lo(void);
-static inline void     data_hi(void);
-static inline bool     data_in(void);
-static inline uint16_t wait_clock_lo(uint16_t us);
-static inline uint16_t wait_clock_hi(uint16_t us);
-static inline uint16_t wait_data_lo(uint16_t us);
-static inline uint16_t wait_data_hi(uint16_t us);
-static inline void     idle(void);
-static inline void     request(void);
-
-#define WAIT_US(stat, us, err)  \
-    do {                        \
-        if (!wait_##stat(us)) { \
-            m0110_error = err;  \
-            goto ERROR;         \
-        }                       \
-    } while (0)
-
-#define WAIT_MS(stat, ms, err)       \
-    do {                             \
-        uint16_t _ms = ms;           \
-        while (_ms) {                \
-            if (wait_##stat(1000)) { \
-                break;               \
-            }                        \
-            _ms--;                   \
-        }                            \
-        if (_ms == 0) {              \
-            m0110_error = err;       \
-            goto ERROR;              \
-        }                            \
-    } while (0)
-
-#define KEY(raw) ((raw)&0x7f)
-#define IS_BREAK(raw) (((raw)&0x80) == 0x80)
-
-uint8_t m0110_error = 0;
-
-void m0110_init(void) {
-    idle();
-    _delay_ms(1000);
-
-    /* Not needed to initialize in fact.
-        uint8_t data;
-        m0110_send(M0110_MODEL);
-        data = m0110_recv();
-        print("m0110_init model: "); print_hex8(data); print("\n");
-
-        m0110_send(M0110_TEST);
-        data = m0110_recv();
-        print("m0110_init test: "); print_hex8(data); print("\n");
-    */
-}
-
-uint8_t m0110_send(uint8_t data) {
-    m0110_error = 0;
-
-    request();
-    WAIT_MS(clock_lo, 250, 1);  // keyboard may block long time
-    for (uint8_t bit = 0x80; bit; bit >>= 1) {
-        WAIT_US(clock_lo, 250, 3);
-        if (data & bit) {
-            data_hi();
-        } else {
-            data_lo();
-        }
-        WAIT_US(clock_hi, 200, 4);
-    }
-    _delay_us(100);  // hold last bit for 80us
-    idle();
-    return 1;
-ERROR:
-    print("m0110_send err: ");
-    print_hex8(m0110_error);
-    print("\n");
-    _delay_ms(500);
-    idle();
-    return 0;
-}
-
-uint8_t m0110_recv(void) {
-    uint8_t data = 0;
-    m0110_error  = 0;
-
-    WAIT_MS(clock_lo, 250, 1);  // keyboard may block long time
-    for (uint8_t i = 0; i < 8; i++) {
-        data <<= 1;
-        WAIT_US(clock_lo, 200, 2);
-        WAIT_US(clock_hi, 200, 3);
-        if (data_in()) {
-            data |= 1;
-        }
-    }
-    idle();
-    return data;
-ERROR:
-    print("m0110_recv err: ");
-    print_hex8(m0110_error);
-    print("\n");
-    _delay_ms(500);
-    idle();
-    return 0xFF;
-}
-
-/*
-Handling for exceptional case of key combinations for M0110A
-
-Shift and Calc/Arrow key could be operated simultaneously:
-
-    Case Shift   Arrow   Events          Interpret
-    -------------------------------------------------------------------
-    1    Down    Down    71, 79, DD      Calc(d)*a *b
-    2    Down    Up      71, 79, UU      Arrow&Calc(u)*a
-    3    Up      Down    F1, 79, DD      Shift(u) *c
-    4    Up      Up      F1, 79, UU      Shift(u) and Arrow&Calc(u)*a
-
-    Case Shift   Calc    Events          Interpret
-    -------------------------------------------------------------------
-    5(1) Down    Down    71, 71, 79, DD  Shift(d) and Cacl(d)
-    6(2) Down    Up      F1, 71, 79, UU  Shift(u) and Arrow&Calc(u)*a
-    7(1) Up      Down    F1, 71, 79, DD  Shift(u) and Calc(d)
-    8(4) Up      Up      F1, F1, 79, UU  Shift(ux2) and Arrow&Calc(u)*a
-
-During Calc key is hold:
-    Case Shift   Arrow   Events          Interpret
-    -------------------------------------------------------------------
-    A(3) ----    Down    F1, 79, DD      Shift(u) *c
-    B    ----    Up      79, UU          Arrow&Calc(u)*a
-    C    Down    ----    F1, 71          Shift(u) and Shift(d)
-    D    Up      ----    F1              Shift(u)
-    E    Hold    Down    79, DD          Normal
-    F    Hold    Up      79, UU          Arrow&Calc(u)*a
-    G(1) Down    Down    F1, 71, 79, DD  Shift(u)*b and Calc(d)*a
-    H(2) Down    Up      F1, 71, 79, UU  Shift(u) and Arrow&Calc(u)*a
-    I(3) Up      Down    F1, F1, 79, DD  Shift(ux2) *c
-    J(4) Up      Up      F1, 79, UU      Shift(u) and Arrow&Calc(u)*a
-
-    Case Shift   Calc    Events          Interpret
-    -------------------------------------------------------------------
-    K(1) ----    Down    71, 79, DD      Calc(d)*a
-    L(4) ----    Up      F1, 79, UU      Shift(u) and Arrow&Calc(u)*a
-    M(1) Hold    Down    71, 79, DD      Calc(d)*a
-    N    Hold    Up      79, UU          Arrow&Calc(u)*a
-
-    Where DD/UU indicates part of Keypad Down/Up event.
-    *a: Impossible to distinguish btween Arrow and Calc event.
-    *b: Shift(d) event is ignored.
-    *c: Arrow/Calc(d) event is ignored.
-*/
-uint8_t m0110_recv_key(void) {
-    static uint8_t keybuf  = 0x00;
-    static uint8_t keybuf2 = 0x00;
-    static uint8_t rawbuf  = 0x00;
-    uint8_t        raw, raw2, raw3;
-
-    if (keybuf) {
-        raw    = keybuf;
-        keybuf = 0x00;
-        return raw;
-    }
-    if (keybuf2) {
-        raw     = keybuf2;
-        keybuf2 = 0x00;
-        return raw;
-    }
-
-    if (rawbuf) {
-        raw    = rawbuf;
-        rawbuf = 0x00;
-    } else {
-        raw = instant();  // Use INSTANT for better response. Should be INQUIRY ?
-    }
-    switch (KEY(raw)) {
-        case M0110_KEYPAD:
-            raw2 = instant();
-            switch (KEY(raw2)) {
-                case M0110_ARROW_UP:
-                case M0110_ARROW_DOWN:
-                case M0110_ARROW_LEFT:
-                case M0110_ARROW_RIGHT:
-                    if (IS_BREAK(raw2)) {
-                        // Case B,F,N:
-                        keybuf = (raw2scan(raw2) | M0110_CALC_OFFSET);  // Calc(u)
-                        return (raw2scan(raw2) | M0110_KEYPAD_OFFSET);  // Arrow(u)
-                    }
-                    break;
-            }
-            // Keypad or Arrow
-            return (raw2scan(raw2) | M0110_KEYPAD_OFFSET);
-            break;
-        case M0110_SHIFT:
-            raw2 = instant();
-            switch (KEY(raw2)) {
-                case M0110_SHIFT:
-                    // Case: 5-8,C,G,H
-                    rawbuf = raw2;
-                    return raw2scan(raw);  // Shift(d/u)
-                    break;
-                case M0110_KEYPAD:
-                    // Shift + Arrow, Calc, or etc.
-                    raw3 = instant();
-                    switch (KEY(raw3)) {
-                        case M0110_ARROW_UP:
-                        case M0110_ARROW_DOWN:
-                        case M0110_ARROW_LEFT:
-                        case M0110_ARROW_RIGHT:
-                            if (IS_BREAK(raw)) {
-                                if (IS_BREAK(raw3)) {
-                                    // Case 4:
-                                    print("(4)\n");
-                                    keybuf2 = raw2scan(raw);                         // Shift(u)
-                                    keybuf  = (raw2scan(raw3) | M0110_CALC_OFFSET);  // Calc(u)
-                                    return (raw2scan(raw3) | M0110_KEYPAD_OFFSET);   // Arrow(u)
-                                } else {
-                                    // Case 3:
-                                    print("(3)\n");
-                                    return (raw2scan(raw));  // Shift(u)
-                                }
-                            } else {
-                                if (IS_BREAK(raw3)) {
-                                    // Case 2:
-                                    print("(2)\n");
-                                    keybuf = (raw2scan(raw3) | M0110_CALC_OFFSET);  // Calc(u)
-                                    return (raw2scan(raw3) | M0110_KEYPAD_OFFSET);  // Arrow(u)
-                                } else {
-                                    // Case 1:
-                                    print("(1)\n");
-                                    return (raw2scan(raw3) | M0110_CALC_OFFSET);  // Calc(d)
-                                }
-                            }
-                            break;
-                        default:
-                            // Shift + Keypad
-                            keybuf = (raw2scan(raw3) | M0110_KEYPAD_OFFSET);
-                            return raw2scan(raw);  // Shift(d/u)
-                            break;
-                    }
-                    break;
-                default:
-                    // Shift + Normal keys
-                    keybuf = raw2scan(raw2);
-                    return raw2scan(raw);  // Shift(d/u)
-                    break;
-            }
-            break;
-        default:
-            // Normal keys
-            return raw2scan(raw);
-            break;
-    }
-}
-
-static inline uint8_t raw2scan(uint8_t raw) { return (raw == M0110_NULL) ? M0110_NULL : ((raw == M0110_ERROR) ? M0110_ERROR : (((raw & 0x80) | ((raw & 0x7F) >> 1)))); }
-
-static inline uint8_t inquiry(void) {
-    m0110_send(M0110_INQUIRY);
-    return m0110_recv();
-}
-
-static inline uint8_t instant(void) {
-    m0110_send(M0110_INSTANT);
-    uint8_t data = m0110_recv();
-    if (data != M0110_NULL) {
-        debug_hex(data);
-        debug(" ");
-    }
-    return data;
-}
-
-static inline void clock_lo() {
-    M0110_CLOCK_PORT &= ~(1 << M0110_CLOCK_BIT);
-    M0110_CLOCK_DDR |= (1 << M0110_CLOCK_BIT);
-}
-static inline void clock_hi() {
-    /* input with pull up */
-    M0110_CLOCK_DDR &= ~(1 << M0110_CLOCK_BIT);
-    M0110_CLOCK_PORT |= (1 << M0110_CLOCK_BIT);
-}
-static inline bool clock_in() {
-    M0110_CLOCK_DDR &= ~(1 << M0110_CLOCK_BIT);
-    M0110_CLOCK_PORT |= (1 << M0110_CLOCK_BIT);
-    _delay_us(1);
-    return M0110_CLOCK_PIN & (1 << M0110_CLOCK_BIT);
-}
-stati