Westberrytech pr (#14422)

* Added support for WB32 MCU

* Modified eeprom_wb32.c

* Remove the eeprom_wb32-related code

4 files changed, 56 insertions, 0 deletions

diff --git a/platforms/chibios/drivers/i2c_master.c b/platforms/chibios/drivers/i2c_master.c
index 63e85ae87d..43591d56f8 100644
--- a/platforms/chibios/drivers/i2c_master.c
+++ b/platforms/chibios/drivers/i2c_master.c
@@ -38,6 +38,9 @@ static const I2CConfig i2cconfig = {
     I2C1_OPMODE,
     I2C1_CLOCK_SPEED,
     I2C1_DUTY_CYCLE,
+#elif defined(WB32F3G71xx)
+    I2C1_OPMODE,
+    I2C1_CLOCK_SPEED,
 #else
     // This configures the I2C clock to 400khz assuming a 72Mhz clock
     // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
diff --git a/platforms/chibios/drivers/spi_master.c b/platforms/chibios/drivers/spi_master.c
index c592369dde..dde0bb0597 100644
--- a/platforms/chibios/drivers/spi_master.c
+++ b/platforms/chibios/drivers/spi_master.c
@@ -54,6 +54,7 @@ bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) {
         return false;
     }
 
+#ifndef WB32F3G71xx
     uint16_t roundedDivisor = 2;
     while (roundedDivisor < divisor) {
         roundedDivisor <<= 1;
@@ -62,6 +63,7 @@ bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) {
     if (roundedDivisor < 2 || roundedDivisor > 256) {
         return false;
     }
+#endif
 
 #if defined(K20x) || defined(KL2x)
     spiConfig.tar0 = SPIx_CTARn_FMSZ(7) | SPIx_CTARn_ASC(1);
@@ -135,6 +137,37 @@ bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) {
     }
 
     spiConfig.cpr = (roundedDivisor - 1) >> 1;
+
+#elif defined(WB32F3G71xx)
+    if (!lsbFirst) {
+        osalDbgAssert(lsbFirst != FALSE, "unsupported lsbFirst");
+    }
+
+    if (divisor < 1) {
+        return false;
+    }
+
+    spiConfig.SPI_BaudRatePrescaler = (divisor << 2);
+
+    switch (mode) {
+        case 0:
+            spiConfig.SPI_CPHA = SPI_CPHA_1Edge;
+            spiConfig.SPI_CPOL = SPI_CPOL_Low;
+            break;
+        case 1:
+            spiConfig.SPI_CPHA = SPI_CPHA_2Edge;
+            spiConfig.SPI_CPOL = SPI_CPOL_Low;
+            break;
+        case 2:
+            spiConfig.SPI_CPHA = SPI_CPHA_1Edge;
+            spiConfig.SPI_CPOL = SPI_CPOL_High;
+            break;
+        case 3:
+            spiConfig.SPI_CPHA = SPI_CPHA_2Edge;
+            spiConfig.SPI_CPOL = SPI_CPOL_High;
+            break;
+    }
+
 #else
     spiConfig.cr1 = 0;
 
diff --git a/platforms/chibios/drivers/uart.c b/platforms/chibios/drivers/uart.c
index 297c1892c3..d2ea5d6415 100644
--- a/platforms/chibios/drivers/uart.c
+++ b/platforms/chibios/drivers/uart.c
@@ -18,7 +18,11 @@
 
 #include "quantum.h"
 
+#if defined(WB32F3G71xx)
+static SerialConfig serialConfig = {SERIAL_DEFAULT_BITRATE, SD1_WRDLEN, SD1_STPBIT, SD1_PARITY, SD1_ATFLCT};
+#else
 static SerialConfig serialConfig = {SERIAL_DEFAULT_BITRATE, SD1_CR1, SD1_CR2, SD1_CR3};
+#endif
 
 void uart_init(uint32_t baud) {
     static bool is_initialised = false;
diff --git a/platforms/chibios/drivers/uart.h b/platforms/chibios/drivers/uart.h
index 5bc4875901..603d51037b 100644
--- a/platforms/chibios/drivers/uart.h
+++ b/platforms/chibios/drivers/uart.h
@@ -68,6 +68,22 @@
 #    define SD1_CR3 0
 #endif
 
+#ifndef SD1_WRDLEN
+#    define SD1_WRDLEN 3
+#endif
+
+#ifndef SD1_STPBIT
+#    define SD1_STPBIT 0
+#endif
+
+#ifndef SD1_PARITY
+#    define SD1_PARITY 0
+#endif
+
+#ifndef SD1_ATFLCT
+#    define SD1_ATFLCT 0
+#endif
+
 void uart_init(uint32_t baud);
 
 void uart_write(uint8_t data);