Merge remote-tracking branch 'origin/master' into develop

5 files changed, 37 insertions, 29 deletions

diff --git a/layouts/community/split_3x6_3/drashna/chconf.h b/layouts/community/split_3x6_3/drashna/chconf.h
new file mode 100644
index 0000000000..ffcfb19896
--- /dev/null
+++ b/layouts/community/split_3x6_3/drashna/chconf.h
@@ -0,0 +1,9 @@
+
+#define CH_CFG_ST_RESOLUTION                16
+#define CH_CFG_ST_FREQUENCY                 10000
+
+#if __has_include("platforms/chibios/common/configs/chconf.h")
+#    include_next "platforms/chibios/common/configs/chconf.h"
+#else
+#    include_next "chconf.h"
+#endif
diff --git a/layouts/community/split_3x6_3/drashna/config.h b/layouts/community/split_3x6_3/drashna/config.h
index 17d7b9ec73..dd950ce7bc 100644
--- a/layouts/community/split_3x6_3/drashna/config.h
+++ b/layouts/community/split_3x6_3/drashna/config.h
@@ -19,8 +19,10 @@
 /* Select hand configuration */
 
 // #define MASTER_LEFT
-#define MASTER_RIGHT
-// #define EE_HAND
+// #define MASTER_RIGHT
+#define EE_HANDS
+#define SPLIT_MODS_ENABLE
+
 #undef USE_I2C
 #undef SSD1306OLED
 
@@ -40,7 +42,7 @@
 #ifdef RGB_MATRIX_ENABLE
 #    ifdef CONVERT_TO_PROTON_C
 #        undef RGB_DI_PIN
-#        define RGB_DI_PIN PAL_LINE(GPIOA, 3)
+#        define RGB_DI_PIN A3
 #    endif
 #    define RGB_MATRIX_KEYPRESSES  // reacts to keypresses
 // #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
@@ -56,24 +58,24 @@
 #endif
 
 #ifdef CONVERT_TO_PROTON_C
-#    define WS2812_PWM_DRIVER PWMD15                 // default: PWMD2
-#    define WS2812_PWM_CHANNEL 2                    // default: 2
-#    define WS2812_PWM_PAL_MODE 9                   // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
-#    define WS2812_DMA_STREAM STM32_DMA1_STREAM5    // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-#    define WS2812_DMA_CHANNEL 5                    // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-#    define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM15_UP  // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
+#    define WS2812_PWM_DRIVER PWMD2                 // default: PWMD2
+#    define WS2812_PWM_CHANNEL 4                    // default: 2
+#    define WS2812_PWM_PAL_MODE 1                   // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
+#    define WS2812_DMA_STREAM STM32_DMA1_STREAM2    // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+#    define WS2812_DMA_CHANNEL 2                    // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+#    define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM2_UP  // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
 
 #    undef SOFT_SERIAL_PIN
 #    define SOFT_SERIAL_PIN D3
 #    define SERIAL_USART_DRIVER SD1     // USART driver of TX pin. default: SD1
 #    define SERIAL_USART_TX_PAL_MODE 7  // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
 
-
 // #define INIT_EE_HANDS_LEFT
 // #define INIT_EE_HANDS_RIGHT
 #endif
 
-#ifdef AUDIO_ENABLE
+
+#if defined(AUDIO_ENABLE) && !defined(CONVERT_TO_PROTON_C)
 #    define AUDIO_PIN B6
 #    define NO_MUSIC_MODE
 #endif
@@ -88,9 +90,5 @@
 #else
 #    define PRODUCT Drashna Hacked Corne Keyboard
 #endif
-#define OLED_FONT_H "layouts/community/split_3x6_3/drashna/glcdfont.c"
-// #define OLED_FONT_WIDTH 5
-// #define OLED_FONT_HEIGHT 7
 
-#define OLED_DISABLE_TIMEOUT
 #define TAPPING_TERM_PER_KEY
diff --git a/layouts/community/split_3x6_3/drashna/keymap.c b/layouts/community/split_3x6_3/drashna/keymap.c
index 513cc7f7dc..65e05f64b6 100644
--- a/layouts/community/split_3x6_3/drashna/keymap.c
+++ b/layouts/community/split_3x6_3/drashna/keymap.c
@@ -27,14 +27,15 @@ enum crkbd_keycodes { RGBRST = NEW_SAFE_RANGE };
  */
 
 // clang-format off
+#define LAYOUT_split_3x6_3_wrapper(...)      LAYOUT_split_3x6_3(__VA_ARGS__)
 #define LAYOUT_split_3x6_3_base( \
     K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
-    K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
+    K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
     K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A  \
   ) \
   LAYOUT_split_3x6_3_wrapper( \
     KC_ESC,  K01,    K02,     K03,      K04,     K05,                        K06,     K07,     K08,     K09,     K0A,     KC_MINS, \
-    ALT_T(KC_TAB), K11,  K12, K13,      K14,     K15,                        K16,     K17,     K18,     K19,     K1A, RALT_T(KC_QUOT), \
+    ALT_T(KC_TAB), K11,  K12, K13,      K14,     K15,                        K16,     K17,     K18,     K19,     K1A, RALT_T(K1B), \
     OS_LSFT, CTL_T(K21), K22, K23,      K24,     K25,                        K26,     K27,     K28,     K29, RCTL_T(K2A), OS_RSFT, \
                                         RGB_MOD,  KC_SPC,  BK_LWER, DL_RAIS,  KC_ENT,  OS_RGUI                                      \
   )
@@ -121,11 +122,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 #ifdef OLED_DRIVER_ENABLE
 oled_rotation_t oled_init_user(oled_rotation_t rotation) {
-    if (is_keyboard_master()) {
-        return OLED_ROTATION_270;
-    } else {
-        return rotation;
-    }
+    return OLED_ROTATION_270;
 }
 #endif
 
diff --git a/layouts/community/split_3x6_3/drashna/mcuconf.h b/layouts/community/split_3x6_3/drashna/mcuconf.h
index 429e4e1cdd..649af5d1f4 100644
--- a/layouts/community/split_3x6_3/drashna/mcuconf.h
+++ b/layouts/community/split_3x6_3/drashna/mcuconf.h
@@ -19,14 +19,18 @@
 
 // #undef STM32_HSE_ENABLED
 // #define STM32_HSE_ENABLED FALSE
-#undef STM32_GPT_USE_TIM15
-#define STM32_GPT_USE_TIM15                  FALSE
+// #undef STM32_GPT_USE_TIM15
+// #define STM32_GPT_USE_TIM15                  FALSE
 
-#undef STM32_PWM_USE_TIM15
-#define STM32_PWM_USE_TIM15                  TRUE
+#undef STM32_PWM_USE_TIM2
+#define STM32_PWM_USE_TIM2                  TRUE
+#undef STM32_PWM_USE_TIM3
+#define STM32_PWM_USE_TIM3                  FALSE
 
 #undef STM32_SERIAL_USE_USART1
 #define STM32_SERIAL_USE_USART1 TRUE
 
-#undef STM32_PWM_TIM15_IRQ_PRIORITY
-#define STM32_PWM_TIM15_IRQ_PRIORITY         16
+// #undef STM32_PWM_TIM15_IRQ_PRIORITY
+// #define STM32_PWM_TIM15_IRQ_PRIORITY         16
+#undef STM32_ST_USE_TIMER
+#define STM32_ST_USE_TIMER 3
diff --git a/layouts/community/split_3x6_3/drashna/rules.mk b/layouts/community/split_3x6_3/drashna/rules.mk
index 5358cb0ac8..db284f78dc 100644
--- a/layouts/community/split_3x6_3/drashna/rules.mk
+++ b/layouts/community/split_3x6_3/drashna/rules.mk
@@ -29,6 +29,6 @@ endif
 
 ifeq ($(strip $(CTPC)), yes)
     HAPTIC_ENABLE = no
-    WS2812_DRIVER = pwm
+    WS2812_DRIVER = pwm # won't work without a patch to the ctpc mk file
     SERIAL_DRIVER = usart
 endif