Bocaj - Third Annual Refactor (Redux) (#10295)

* Reset everything to upstream, reapply Bocaj changes

* Bocaj - address PR comments

* Just in time changes

* Bocaj - Several adjustments after using the layout for a while

1 files changed, 109 insertions, 0 deletions

diff --git a/layouts/community/ortho_4x12/bocaj/config.h b/layouts/community/ortho_4x12/bocaj/config.h
new file mode 100644
index 0000000000..2f5b731984
--- /dev/null
+++ b/layouts/community/ortho_4x12/bocaj/config.h
@@ -0,0 +1,109 @@
+#pragma once
+
+#define LEADER_TIMEOUT 250
+#define LEADER_PER_KEY_TIMING
+
+#if defined(RGBLIGHT_ENABLE) && !defined(RGBLED_NUM)
+#    if defined(KEYBOARD_planck_light)
+#        define RGB_DI_PIN A0
+#        define RGBLED_NUM 13  // Number of LEDs
+#    endif
+#    define RGBLIGHT_HUE_STEP 12
+#    define RGBLIGHT_SAT_STEP 12
+#    define RGBLIGHT_VAL_STEP 12
+#    define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
+#    define RGBLIGHT_EFFECT_SNAKE_LENGTH 2
+#    ifdef RGB_MATRIX_ENABLE
+#        define RGBLIGHT_DISABLE_KEYCODES
+#    endif
+#endif  // RGBLIGHT_ENABLE
+
+#ifdef RGB_MATRIX_ENABLE
+#    define RGB_MATRIX_KEYPRESSES  // reacts to keypresses (will slow down matrix scan by a lot)
+// #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened)
+#    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+// #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+// #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
+#    undef RGB_MATRIX_LED_PROCESS_LIMIT
+#    undef RGB_MATRIX_LED_FLUSH_LIMIT
+#endif
+
+#if defined(KEYBOARD_planck_ez)
+#    undef PRODUCT
+#    define PRODUCT Bocaj Hacked Planck EZ
+#endif
+
+#define EEPROM_I2C_RM24C512C
+
+#define ENCODER_DIRECTION_FLIP
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+
+// #define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
+
+#define FB_ERM_LRA 1     /* For ERM:0 or LRA:1*/
+#define FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
+#define FB_LOOPGAIN 1    /* For  Low:0, Medium:1, High:2, Very High:3 */
+
+/* default 3V ERM vibration motor voltage and library*/
+#if FB_ERM_LRA == 0
+#    define RATED_VOLTAGE 3
+#    define V_RMS 2.3
+#    define V_PEAK 3.30
+/* Library Selection */
+#    define LIB_SELECTION 4 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
+
+/* default 2V LRA voltage and library */
+#elif FB_ERM_LRA == 1
+#    define RATED_VOLTAGE 2
+#    define V_RMS 2.0
+#    define V_PEAK 2.85
+#    define F_LRA 200
+/* Library Selection */
+#    define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
+
+#endif
+
+/* Control 1 register settings */
+#define DRIVE_TIME 25
+#define AC_COUPLE 0
+#define STARTUP_BOOST 1
+
+/* Control 2 Settings */
+#define BIDIR_INPUT 1
+#define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */
+#define SAMPLE_TIME 3
+#define BLANKING_TIME 1
+#define IDISS_TIME 1
+
+/* Control 3 settings */
+#define NG_THRESH 2
+#define ERM_OPEN_LOOP 1
+#define SUPPLY_COMP_DIS 0
+#define DATA_FORMAT_RTO 0
+#define LRA_DRIVE_MODE 0
+#define N_PWM_ANALOG 0
+#define LRA_OPEN_LOOP 0
+/* Control 4 settings */
+#define ZC_DET_TIME 0
+#define AUTO_CAL_TIME 3