[Keyboard] Georgi improvements (#5899)

* Georgi improvements

* The writing was in the -Wall

8 files changed, 395 insertions, 2 deletions

diff --git a/keyboards/georgi/config.h b/keyboards/georgi/config.h
index 30f07667e3..b35a1be789 100644
--- a/keyboards/georgi/config.h
+++ b/keyboards/georgi/config.h
@@ -23,7 +23,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* Defaults */
 
-#define VERSION "v1.0: Stenoknight"
+#define VERSION "v1.1: ClayM"
 #define VERBOSE
 
 #define FORCE_NKRO
diff --git a/keyboards/georgi/keymaps/colemak-dh/keymap.c b/keyboards/georgi/keymaps/colemak-dh/keymap.c
new file mode 100644
index 0000000000..29b35f6abd
--- /dev/null
+++ b/keyboards/georgi/keymaps/colemak-dh/keymap.c
@@ -0,0 +1,306 @@
+/*
+ * Good on you for modifying your layout, this is the most nonQMK layout you will come across
+ * There are three modes, Steno (the default), QWERTY (Toggleable) and a Momentary symbol layer
+ *
+ * Don't modify the steno layer directly, instead add chords using the keycodes and macros
+ * from sten.h to the layout you want to modify.
+ *
+ * Observe the comment above processQWERTY!
+ *
+ * http://docs.gboards.ca
+ */
+
+#include QMK_KEYBOARD_H
+#include "sten.h"
+#include "keymap_steno.h"
+#define IGNORE_MOD_TAP_INTERRUPT
+
+// Steno Layers
+#define FUNCT	( LSD | LK | LP | LH )
+#define MEDIA	( LSD | LK | LW | LR )
+#define MOVE	( LSD | LK )
+#define NUM		( PWR )
+#define SYM		( RZ )
+
+// Keys and chords that, once they appear, are added to every subsequent partial chord
+// until the whole thing is sent.
+uint32_t stenoLayers[] = {NUM, SYM, MOVE, MEDIA, FUNCT};
+
+// QMK Layers
+#define STENO_LAYER   0
+#define GAMING		  1
+#define GAMING_2	  2
+
+/* Keyboard Layout
+ * ,---------------------------------.	  ,------------------------------.
+ * | FN  | LSU | LFT | LP | LH | ST1 |	  | ST3 | RF | RP | RL | RT | RD |
+ * |-----+-----+-----+----+----|-----|	  |-----|----+----+----+----+----|
+ * | PWR | LSD | LK  | LW | LR | ST2 |	  | ST4 | RR | RB | RG | RS | RZ |
+ * `---------------------------------'	  `------------------------------'
+ *					 ,---------------,	  .---------------.
+ *					 | LNO | LA | LO |	  | RE | RU | RNO |
+ *					 `---------------'	  `---------------'
+ */
+
+// Note: You can only use basic keycodes here!
+//
+// P() is just a wrapper to make your life easier.
+// PC() applies the mapping to all of the StenoLayers. For overloading, define these last.
+//
+// FN is unavailable. That is reserved for system use.
+// Chords containing PWR are always available, even in steno mode.
+//
+// http://docs.gboards.ca
+uint32_t processQwerty(bool lookup) {
+	// Special keys
+	P( RT  | RS  | RD  | RZ | LNO,		SEND_STRING(VERSION); SEND_STRING(__DATE__));
+	P( LFT | LK  | LP  | LW,			REPEAT());
+
+	// Mouse Keys
+	/* P( LO  | LSD | LK,	CLICK_MOUSE(KC_MS_BTN2)); */
+	/* P( LO  | LR  | LW,	CLICK_MOUSE(KC_MS_BTN1)); */
+
+
+/* Function layer
+ * ,-----------------------------------,    ,-----------------------------------,
+ * |     |     |     | NCTFUNCTF |     |    |     | F1  | F2  | F3  | F4  |     |
+ * |     +     +     +     +     +     |    |     + F5  + F6  + F7  + F8  +     |
+ * |     | FUNCTFUNC |     |     |     |    |     | F9  | F10 | F11 | F12 |     |
+ * `-----+-----+-----+-----+-----+-----'    `-----+-----+-----+-----+-----+-----'
+*/
+	P( FUNCT | RF,			SEND(KC_F1));
+	P( FUNCT | RP,			SEND(KC_F2));
+	P( FUNCT | RL,			SEND(KC_F3));
+	P( FUNCT | RT,			SEND(KC_F4));
+
+	P( FUNCT | RF | RR,		SEND(KC_F5));
+	P( FUNCT | RP | RB,		SEND(KC_F6));
+	P( FUNCT | RL | RG,		SEND(KC_F7));
+	P( FUNCT | RT | RS,		SEND(KC_F8));
+
+	P( FUNCT | RR,			SEND(KC_F9));
+	P( FUNCT | RG,			SEND(KC_F10));
+	P( FUNCT | RB,			SEND(KC_F11));
+	P( FUNCT | RS,			SEND(KC_F12));
+
+
+/* Movement layer
+ * ,-----------------------------------,    ,-----------------------------------,
+ * |     |     |     |     |     |     |    |     | <-  |  ↓  |  ↑  | ->  |     |
+ * |     +     +     +     +     +     |    |     +     +     +     +     +     |
+ * |     | MOVEMOVEM |     |     |     |    |     | Hm  | PgD | PgU | End |     |
+ * `-----+-----+-----+-----+-----+-----'    `-----+-----+-----+-----+-----+-----'
+*/
+	P( MOVE | RF,			SEND(KC_LEFT));
+	P( MOVE | RP,			SEND(KC_DOWN));
+	P( MOVE | RL,			SEND(KC_UP));
+	P( MOVE | RT,			SEND(KC_RIGHT));
+
+	P( MOVE | RR,			SEND(KC_HOME));
+	P( MOVE | RB,			SEND(KC_PGDN));
+	P( MOVE | RG,			SEND(KC_PGUP));
+	P( MOVE | RS,			SEND(KC_END));
+
+
+/* Media Layer
+ * ,-----------------------------------,    ,-----------------------------------,
+ * |     |     |     |     |     |     |    |     |Prev |Play | PLY |Next | VolU|
+ * |     +     +     +     +     +     |    |     +     +     +     +     +     |
+ * |     | MEDIAMEDIAMEDIAMEDIAM |     |    |     |     |     |     |Mute | VolD|
+ * `-----+-----+-----+-----+-----+-----'    `-----+-----+-----+-----+-----+-----'
+*/
+	P( MEDIA | RF,			SEND(KC_MPRV));
+	P( MEDIA | RP,			SEND(KC_MPLY));
+	P( MEDIA | RL,			SEND(KC_MPLY));
+	P( MEDIA | RT,			SEND(KC_MNXT));
+	P( MEDIA | RD,			SEND(KC_VOLU));
+
+	P( MEDIA | RS,			SEND(KC_MUTE));
+	P( MEDIA | RZ,			SEND(KC_VOLD));
+
+
+/* Numbers
+ * ,-----------------------------------,    ,-----------------------------------,
+ * |     |     |  a  |  b  |  c  |     |    |  :  |  1  |  2  |  3  |  .  |     |
+ * |     +     +  d  +  e  +  f  +     |    |  0  +  4  +  5  +  6  +  -  +     |
+ * | NUM |     |     |     |     |     |    |     |  7  |  8  |  9  |  0  |     |
+ * `-----+-----+-----+-----+-----+-----'    `-----+-----+-----+-----+-----+-----'
+*/
+	P( NUM | LFT,			SEND(KC_A));
+	P( NUM | LP,			SEND(KC_B));
+	P( NUM | LH,			SEND(KC_C));
+	P( NUM | LK,			SEND(KC_D));
+	P( NUM | LW,			SEND(KC_E));
+	P( NUM | LR,			SEND(KC_F));
+
+	// Right hand
+	P( NUM | ST3,			SEND_STRING(":"));
+	P( NUM | RF,			SEND(KC_1));
+	P( NUM | RP,			SEND(KC_2));
+	P( NUM | RL,			SEND(KC_3));
+	P( NUM | RT,			SEND(KC_DOT));
+
+	P( NUM | ST3 | ST4,		SEND(KC_0));
+	P( NUM | RF  | RR,		SEND(KC_4));
+	P( NUM | RP  | RB,		SEND(KC_5));
+	P( NUM | RG  | RL,		SEND(KC_6));
+	P( NUM | RT  | RS,		SEND(KC_MINUS));
+
+	P( NUM | RR,			SEND(KC_7));
+	P( NUM | RB,			SEND(KC_8));
+	P( NUM | RG,			SEND(KC_9));
+	P( NUM | RS,			SEND(KC_0));
+
+
+/* Symbols
+ * ,-----------------------------------,    ,-----------------------------------,
+ * |     |  `  |  [  |  {  |  (  |  <  |    |  >  |  )  |  }  |  ]  |  ?  |     |
+ * |     +  ~  +  -  +  '  +  :  +  _  |    |  \  +  =  +  "  +  +  +  ?  +     |
+ * |     |  !  |  @  |  #  |  $  |  %  |    |  |  |  ^  |  &  |  *  |  ?  | SYM |
+ * `-----+-----+-----+-----+-----+-----'    `-----+-----+-----+-----+-----+-----'
+*/
+	// Left hand
+	P( SYM | LSU,			SEND(KC_GRV));
+	P( SYM | LFT,			SEND(KC_LBRC));
+	P( SYM | LP,			SEND_STRING("{"));
+	P( SYM | LH,			SEND_STRING("("));
+	P( SYM | ST1,			SEND_STRING("<"));
+
+	P( SYM | LSU | LSD,		SEND_STRING("~"));
+	P( SYM | LFT | LK,		SEND(KC_MINS));
+	P( SYM | LP  | LW,		SEND(KC_QUOTE));
+	P( SYM | LH  | LR,		SEND_STRING(":"));
+	P( SYM | ST1 | ST2,		SEND_STRING("_"));
+
+	P( SYM | LSD,			SEND_STRING("!"));
+	P( SYM | LK,			SEND_STRING("@"));
+	P( SYM | LW,			SEND_STRING("#"));
+	P( SYM | LR,			SEND_STRING("$"));
+	P( SYM | ST2,			SEND_STRING("%"));
+
+	// Right hand
+	P( SYM | ST3,			SEND_STRING(">"));
+	P( SYM | RF,			SEND_STRING(")"));
+	P( SYM | RP,			SEND_STRING("}"));
+	P( SYM | RL,			SEND_STRING("]"));
+	P( SYM | RT,			SEND_STRING("?"));
+
+	P( SYM | ST3 | ST4,		SEND(KC_BSLASH));
+	P( SYM | RF  | RR,		SEND(KC_EQUAL));
+	P( SYM | RP  | RB,		SEND_STRING("\""));
+	P( SYM | RG  | RL,		SEND_STRING("+"));
+	P( SYM | RT  | RS,		SEND_STRING("?"));
+
+	P( SYM | ST4,			SEND_STRING("|"));
+	P( SYM | RR,			SEND_STRING("^"));
+	P( SYM | RB,			SEND_STRING("&"));
+	P( SYM | RG,			SEND_STRING("*"));
+	P( SYM | RS,			SEND_STRING("?"));
+
+
+/* Letters
+ * ,-----------------------------------,    ,-----------------------------------,
+ * |     |  Q  |  W  |  F  |  P  |  B  |    |  J  |  L  |  U  |  Y  |  ;  | ctl |
+ * +-----+- A -+- R -+- S -+- T -+- G -|    |- M -+- N -+- E -+- I -+- O -+-----|
+ * | bsp |  Z  |  X  |  C  |  D  |  V  |    |  K  |  H  |  ,  |  .  |  /  | del |
+ * `-----+-----+-----+-----+-----+-----'    `-----+-----+-----+-----+-----+-----'
+ *					   ,---------------,    .---------------.
+ *					   | alt | ent|shfr|    | spc| gui| alt |
+ *					   `---------------'    `---------------'
+*/
+	// Left hand
+	P( LSU,					SEND(KC_Q));
+	P( LFT,					SEND(KC_W));
+	P( LP,					SEND(KC_F));
+	P( LH,					SEND(KC_P));
+	P( ST1,					SEND(KC_B));
+
+	P( LSU | LSD,			SEND(KC_A));
+	P( LFT | LK,			SEND(KC_R));
+	P( LP  | LW,			SEND(KC_S));
+	P( LH  | LR,			SEND(KC_T));
+	P( ST1 | ST2,			SEND(KC_G));
+
+	P( LSD,					SEND(KC_Z));
+	P( LK,					SEND(KC_X));
+	P( LW,					SEND(KC_C));
+	P( LR,					SEND(KC_D));
+	P( ST2,					SEND(KC_V));
+
+	// Right hand
+	P( ST3,					SEND(KC_J));
+	P( RF,					SEND(KC_L));
+	P( RP,					SEND(KC_U));
+	P( RL,					SEND(KC_Y));
+	P( RT,					SEND(KC_SCLN));
+
+	P( ST3 | ST4,			SEND(KC_M));
+	P( RF  | RR,			SEND(KC_N));
+	P( RP  | RB,			SEND(KC_E));
+	P( RG  | RL,			SEND(KC_I));
+	P( RT  | RS,			SEND(KC_O));
+
+	P( ST4,					SEND(KC_K));
+	P( RR,					SEND(KC_H));
+	P( RB,					SEND(KC_COMM));
+	P( RG,					SEND(KC_DOT));
+	P( RS,					SEND(KC_SLSH));
+
+	// Thumb Chords and modifiers
+	//
+	PC( LNO | RNO | LA | RU,		SEND(KC_LCTL); SEND(KC_LSFT));
+	PC( LNO | LA  | RE,				SEND(KC_LCTL); SEND(KC_LSFT); SEND(KC_LALT));
+
+	// overrides
+	P( PWR | LO,			SEND(KC_LSFT); SEND(KC_BSPC));
+	P( PWR | RD,			SEND(KC_LCTL); SEND(KC_BSPC));
+	P( RZ | RD,				SEND(KC_LCTL); SEND(KC_DEL));
+
+	PC( LNO | LA | LO,		SEND(KC_LSFT); SEND(KC_ESC));
+	PC( LA | LO,			SEND(KC_ESC));
+	PC( LNO,				SEND(KC_LALT));
+	PC( LA,					SEND(KC_ENT));
+	PC( LO,					SEND(KC_LSFT));
+
+	PC( RNO,				SEND(KC_RALT));
+	PC( RE | RU,			SEND(KC_TAB));
+	PC( RE,					SEND(KC_SPC));
+	PC( RU,					SEND(KC_LGUI));
+   
+	PC( PWR,				SEND(KC_BSPC));
+	PC( RD,					SEND(KC_LCTL));
+	P( RZ,					SEND(KC_DEL));
+
+	return 0;
+}
+
+// "Layers"
+// Steno layer should be first in your map.
+// When PWR | FN | ST3 | ST4 is pressed, the layer is increased to the next map. You must return to STENO_LAYER at the end.
+// If you need more space for chords, remove the two gaming layers.
+// Note: If using NO_ACTION_TAPPING, LT will not work!
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	// Main layer, everything goes through here
+	[STENO_LAYER] = LAYOUT_georgi(
+			STN_FN,  STN_S1,  STN_TL,  STN_PL,	STN_HL,  STN_ST1,		STN_ST3, STN_FR,  STN_PR,  STN_LR,	STN_TR,  STN_DR,
+			STN_PWR, STN_S2,  STN_KL,  STN_WL,	STN_RL,  STN_ST2,		STN_ST4, STN_RR,  STN_BR,  STN_GR,	STN_SR,  STN_ZR,
+								   STN_N1,		STN_A,	 STN_O,			STN_E,	 STN_U,   STN_N7
+	),
+	// Gaming layer with Numpad, Very limited
+	[GAMING] = LAYOUT_georgi(
+		KC_LSFT, KC_Q,	  KC_W,    KC_E,	KC_R,	 KC_T,						 KC_Y,	  KC_U,    KC_I,	KC_O,	 KC_P,	  KC_ENT,
+		KC_LCTL, KC_A,	  KC_S,    KC_D,	KC_F,	 KC_G,						 KC_H,	  KC_J,    KC_K,	KC_L,	 KC_SCLN, KC_DQUO,
+								   KC_LALT, KC_SPC,  LT(GAMING_2, KC_ENT),		 KC_DEL,  KC_ASTR, TO(STENO_LAYER)
+	),
+
+	[GAMING_2] = LAYOUT_georgi(
+		KC_LSFT, KC_1,	  KC_2,    KC_3,	KC_4,	 KC_5,			KC_6,	 KC_7,	  KC_8,    KC_9,	KC_0,	 KC_MINS,
+		KC_LCTL, KC_Z,	  KC_X,    KC_C,	KC_V,	 KC_B,			KC_N,	 KC_M,	  KC_LT,   KC_GT,	KC_QUES, KC_RSFT,
+								   KC_LALT, KC_SPC,  KC_ENT,		KC_DEL,  KC_ASTR, TO(STENO_LAYER)
+	)
+};
+
+// Don't fuck with this, thanks.
+size_t keymapsCount  = sizeof(keymaps)/sizeof(keymaps[0]);
+size_t stenoLayerCount = sizeof(stenoLayers)/sizeof(stenoLayers[0]);
diff --git a/keyboards/georgi/keymaps/colemak-dh/readme.md b/keyboards/georgi/keymaps/colemak-dh/readme.md
new file mode 100644
index 0000000000..f9da34b024
--- /dev/null
+++ b/keyboards/georgi/keymaps/colemak-dh/readme.md
@@ -0,0 +1,11 @@
+# Georgi QWERTY/Steno firmware
+
+This is the default keymap for Georgi, it's based heavily off of the naps62 ErgoDox and the Gergo layout. 
+It is both a ergonomic and programmer friendly keymap.
+
+Ideally you should copy this directory and make your changes there. If you come up with a good layout submit a PR!
+
+## Space issues
+If you find yourself running out of space for dictionary entries, disabling mousekeys in rules.mk will save
+you about 4k for entries!
+Get a free 1k by deleting the Gaming layers from the keymap!
diff --git a/keyboards/georgi/keymaps/colemak-dh/rules.mk b/keyboards/georgi/keymaps/colemak-dh/rules.mk
new file mode 100644
index 0000000000..07394aef48
--- /dev/null
+++ b/keyboards/georgi/keymaps/colemak-dh/rules.mk
@@ -0,0 +1,45 @@
+#----------------------------------------------------------------------------
+# make georgi:claymager:dfu
+# Make sure you have dfu-programmer installed!
+#----------------------------------------------------------------------------
+
+NO_REPEAT				 = yes
+VERBOSE					 = yes
+KEYBOARD_SHARED_EP       = yes
+CUSTOM_MATRIX			 = yes
+STENO_LAYERS			 = yes
+
+#Firmware reduction options
+MOUSEKEY_ENABLE			 = yes 		# 1500 bytes
+NO_TAPPING				 = no 	    # 2000 bytes
+NO_PRINT				 = yes
+
+#Debug options
+CONSOLE_ENABLE			 = no
+DEBUG_MATRIX_SCAN_RATE   = no
+DEBUG_MATRIX			 = no
+ONLY_QWERTY				 = no
+
+# A bunch of stuff that you shouldn't touch unless you
+# know what you're doing.
+#
+# No touchy, capiche?
+SRC += matrix.c i2c_master.c
+ifeq ($(strip $(DEBUG_MATRIX)), yes)
+    OPT_DEFS += -DDEBUG_MATRIX
+endif
+ifeq ($(strip $(NO_REPEAT)), yes)
+    OPT_DEFS += -DNO_REPEAT
+endif
+ifeq ($(strip $(NO_PRINT)), yes)
+    OPT_DEFS += -DNO_PRINT -DNO_DEBUG
+endif
+ifeq ($(strip $(ONLY_QWERTY)), yes)
+    OPT_DEFS += -DONLYQWERTY
+endif
+ifeq ($(strip $(NO_TAPPING)), yes)
+    OPT_DEFS += -DNO_ACTION_TAPPING
+endif
+ifeq ($(strip $(STENO_LAYERS)), yes)
+    OPT_DEFS += -DSTENOLAYERS
+endif
diff --git a/keyboards/georgi/keymaps/default/keymap.c b/keyboards/georgi/keymaps/default/keymap.c
index 3a0edb8923..404aac8fc1 100644
--- a/keyboards/georgi/keymaps/default/keymap.c
+++ b/keyboards/georgi/keymaps/default/keymap.c
@@ -38,6 +38,12 @@
 
 // Note: You can only use basic keycodes here!
 // P() is just a wrapper to make your life easier.
+// PC() applies the mapping to all of the StenoLayers.
+//   To overload, declare it with P() first.
+//   Be sure to enable in rules.mk and see colemak-dh for usage 
+//
+// FN is unavailable. That is reserved for system use.
+// Chords containing PWR are always available, even in steno mode.
 //
 // http://docs.gboards.ca
 uint32_t processQwerty(bool lookup) {
@@ -135,7 +141,7 @@ uint32_t processQwerty(bool lookup) {
     P( RZ,          SEND(KC_ESC));
 
     // Symbols and Numbers
-    P( PWR | RE | RU,      SEND(KC_ENT));
+ 	P( PWR | RE | RU,      SEND(KC_ENT));
     P( PWR | LA | LO,      SEND(KC_SPC));
     P( PWR | LP | LW,      SEND(KC_LSFT); SEND(KC_9));       // (
     P( PWR | LH | LR,      SEND(KC_LSFT); SEND(KC_0));       // )
@@ -169,6 +175,10 @@ uint32_t processQwerty(bool lookup) {
     P( PWR | RE,           SEND(KC_SCLN));
     P( PWR | RU,           SEND(KC_BSLS));
     P( PWR | LNO,          SEND(KC_BSLS));
+    P( PWR | RF | RR,      SEND(KC_LEFT));
+    P( PWR | RP | RB,      SEND(KC_DOWN));
+    P( PWR | RL | RG,      SEND(KC_UP));
+    P( PWR | RT | RS,      SEND(KC_RIGHT));
 
     // Letters
     P( LSU | LSD,    SEND(KC_A));
diff --git a/keyboards/georgi/keymaps/default/rules.mk b/keyboards/georgi/keymaps/default/rules.mk
index 90d8057c32..7bd3d7aa20 100644
--- a/keyboards/georgi/keymaps/default/rules.mk
+++ b/keyboards/georgi/keymaps/default/rules.mk
@@ -7,6 +7,7 @@ NO_REPEAT				 = no
 VERBOSE					 = yes
 KEYBOARD_SHARED_EP       = yes
 CUSTOM_MATRIX			 = yes
+STENO_LAYERS			 = no
 
 #Firmware reduction options
 MOUSEKEY_ENABLE			 = yes 		# 1500 bytes
diff --git a/keyboards/georgi/sten.c b/keyboards/georgi/sten.c
index 1a84c7893f..197abaf92f 100644
--- a/keyboards/georgi/sten.c
+++ b/keyboards/georgi/sten.c
@@ -11,6 +11,18 @@ uint32_t pChord 		= 0;		// Previous Chord
 int		 pChordIndex 	= 0;		// Keys in previousachord
 uint32_t pChordState[32];			// Previous chord sate 
 uint32_t stickyBits = 0;			// Or'd with every incoming press
+#ifndef NO_DEBUG
+char debugMsg[32];
+#endif
+
+// StenoLayer
+uint32_t releasedChord	= 0;		// Keys released from current chord
+uint32_t tChord			= 0;		// Protects state of cChord
+
+#ifndef STENOLAYERS
+uint32_t stenoLayers[] = { PWR };
+size_t 	 stenoLayerCount = sizeof(stenoLayers)/sizeof(stenoLayers[0]);
+#endif
 
 // Mode state
 enum MODE { STENO = 0, QWERTY, COMMAND };
diff --git a/keyboards/georgi/sten.h b/keyboards/georgi/sten.h
index 5a9771d9a0..e94f10fc28 100644
--- a/keyboards/georgi/sten.h
+++ b/keyboards/georgi/sten.h
@@ -13,6 +13,9 @@
 
 extern size_t keymapsCount;			// Total keymaps
 extern uint32_t cChord;				// Current Chord
+extern uint32_t stenoLayers[];		// Chords that simulate QMK layers
+extern size_t stenoLayerCount;		// Number of simulated layers
+uint32_t refChord;					// Reference chord for PC macro
 
 // Function defs
 void 			processChord(bool useFakeSteno);
@@ -30,6 +33,11 @@ void 			CLICK_MOUSE(uint8_t);
 
 // Keymap helper
 #define P(chord, act) if (cChord == (chord)) { if (!lookup) {act;} return chord;}
+#define PC(chord, act) if (cChord == (chord)) { if (!lookup) {act;} return chord;} \
+	for(int i = 0; i < stenoLayerCount; i++) { \
+		refChord = stenoLayers[i] | chord; \
+		if (cChord == (refChord)) { if (!lookup) {act;} return refChord;}; \
+}
 
 // Shift to internal representation
 // i.e) S(teno)R(ight)F