Merge pull request #1129 from unxmaal/unxmaal_spacefn

Layout: Spacebar long-press as fn, for GH60 and GH60 Satan boards

8 files changed, 710 insertions, 0 deletions

diff --git a/keyboards/gh60/keymaps/unxmaal/Makefile b/keyboards/gh60/keymaps/unxmaal/Makefile
new file mode 100644
index 0000000000..c73cf11417
--- /dev/null
+++ b/keyboards/gh60/keymaps/unxmaal/Makefile
@@ -0,0 +1,112 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
+# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE ?= YES		# MIDI controls
+# UNICODE_ENABLE ?= YES		# Unicode
+# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= yes          # Enable RGB Underglow
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
+
diff --git a/keyboards/gh60/keymaps/unxmaal/README.md b/keyboards/gh60/keymaps/unxmaal/README.md
new file mode 100644
index 0000000000..52bf97ef4f
--- /dev/null
+++ b/keyboards/gh60/keymaps/unxmaal/README.md
@@ -0,0 +1,20 @@
+Unxmaal's GH60 Layout
+=====================
+* Mostly stolen from /u/robotmaxtron
+
+##Quantum MK Firmware
+For the full Quantum feature list, see the parent readme.md.
+
+* Standard Mac ANSI layout
+* Spacebar acts as space when tapped, Fn when held
+* Menu acts as menu when tapped, Fn2 when held
+* Layer1:
+  * Top row = `~, F1-F12, Del
+  * JKIL = arrow cluster
+* Layer2:
+  * Top row = media controls
+  * JKIL = PgDn/Up/Home/Insert
+  * Backspace = Reset
+
+### Additional Credits
+Keymap has been based on various keymaps available from the QMK Repo for the GH60-SATAN and KC60 keyboards.
diff --git a/keyboards/gh60/keymaps/unxmaal/WS2812-wiring.jpg b/keyboards/gh60/keymaps/unxmaal/WS2812-wiring.jpg
new file mode 100644
index 0000000000..4ab8cc31ac
--- /dev/null
+++ b/keyboards/gh60/keymaps/unxmaal/WS2812-wiring.jpg
diff --git a/keyboards/gh60/keymaps/unxmaal/config.h b/keyboards/gh60/keymaps/unxmaal/config.h
new file mode 100644
index 0000000000..bb218d6fd4
--- /dev/null
+++ b/keyboards/gh60/keymaps/unxmaal/config.h
@@ -0,0 +1,190 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xFEED
+#define PRODUCT_ID   0x6060
+#define DEVICE_VER   0x0001
+#define MANUFACTURER    geekhack
+#define PRODUCT         GH60
+#define DESCRIPTION     t.m.k. keyboard firmware for GH60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+ #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+// Rev A
+// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
+// Rev B/C
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1     H
+//#define MAGIC_KEY_HELP2     SLASH
+//#define MAGIC_KEY_DEBUG     D
+//#define MAGIC_KEY_DEBUG_MATRIX  X
+//#define MAGIC_KEY_DEBUG_KBD   K
+//#define MAGIC_KEY_DEBUG_MOUSE  M
+//#define MAGIC_KEY_VERSION    V
+//#define MAGIC_KEY_STATUS     S
+//#define MAGIC_KEY_CONSOLE    C
+//#define MAGIC_KEY_LAYER0_ALT1  ESC
+//#define MAGIC_KEY_LAYER0_ALT2  GRAVE
+//#define MAGIC_KEY_LAYER0     0
+//#define MAGIC_KEY_LAYER1     1
+//#define MAGIC_KEY_LAYER2     2
+//#define MAGIC_KEY_LAYER3     3
+//#define MAGIC_KEY_LAYER4     4
+//#define MAGIC_KEY_LAYER5     5
+//#define MAGIC_KEY_LAYER6     6
+//#define MAGIC_KEY_LAYER7     7
+//#define MAGIC_KEY_LAYER8     8
+//#define MAGIC_KEY_LAYER9     9
+//#define MAGIC_KEY_BOOTLOADER   PAUSE
+//#define MAGIC_KEY_LOCK      CAPS
+//#define MAGIC_KEY_EEPROM     E
+//#define MAGIC_KEY_NKRO      N
+//#define MAGIC_KEY_SLEEP_LED   Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * RGB Underglow
+ * These settings are for the F4 by default:
+ * 
+ *
+ * #define ws2812_PORTREG  PORTF
+ * #define ws2812_DDRREG   DDRF
+ * #define ws2812_pin PF4
+ * #define RGBLED_NUM 14     // Number of LEDs
+ * #define RGBLIGHT_HUE_STEP 10
+ * #define RGBLIGHT_SAT_STEP 17
+ * #define RGBLIGHT_VAL_STEP 17
+ *
+ * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. 
+ * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. 
+ * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
+*/
+
+/* Deprecated code below
+#define ws2812_PORTREG  PORTF 
+#define ws2812_DDRREG   DDRF
+#define ws2812_pin PF4
+*/ 
+#define RGB_DI_PIN F4
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 8         // Number of LEDs
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
diff --git a/keyboards/gh60/keymaps/unxmaal/keymap.c b/keyboards/gh60/keymaps/unxmaal/keymap.c
new file mode 100644
index 0000000000..7c9bd6a6d7
--- /dev/null
+++ b/keyboards/gh60/keymaps/unxmaal/keymap.c
@@ -0,0 +1,228 @@
+#include "gh60.h"
+#include "action_layer.h"
+
+#define _BL 0
+#define _AL 1
+#define _FL 2
+#define _UL 3
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+   /*
+   *  ANSI Base, Mac style
+   * ,-----------------------------------------------------------------------------.
+   * |Esc   |  1|   2|   3|   4|   5|   6|   7|   8|   9|   0|   -|   = |   Backsp |
+   * |-----------------------------------------------------------------------------|
+   * |Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I|   O|  P|  [|  ]|     \|
+   * |-----------------------------------------------------------------------------|
+   * |Caps/Fn      |    A|    S|    D|    F|   G|  H|  J|  K|  L|  ;|  '|   Enter  |
+   * |-----------------------------------------------------------------------------|
+   * |Shift      |    Z|     X|    C|     V|  B|  N|  M|  ,|  .|  /|     Shift     |
+   * |-----------------------------------------------------------------------------|
+   * |Fn|Alt |Gui | Space(tapped), Fn(held) |Gui |Alt  |Menu(tapped, Fn2(held)|Ctrl|
+   * `-----------------------------------------------------------------------------'
+   */
+	[_BL] = KEYMAP(
+        KC_ESC,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSPC, \
+	      KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSLS, \
+        KC_LCTL,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_NO,KC_ENT,  \
+        KC_LSFT,KC_NO,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_NO,KC_RSFT, \
+        MO(1),KC_LALT,KC_LGUI,        LT(1,KC_SPACE),      KC_NO, KC_RGUI, KC_RALT, LT(2,KC_MENU), KC_RCTL),
+
+   /*
+   * Pok3r style arrow cluster
+   * ,-----------------------------------------------------------.
+   * |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL |
+   * |-----------------------------------------------------------|
+   * |     |   |    |   |   |   |   |   |Up|   |   |   |   |     |
+   * |-----------------------------------------------------------|
+   * |       |   |   |   |   |   |   |Left|Down|Right|   |   |   |
+   * |-----------------------------------------------------------|
+   * |        |   |   |   |   |   |   |   |   |   |   |          |
+   * |-----------------------------------------------------------|
+   * |    |    |    |                        |    |    |    |    |
+   * `-----------------------------------------------------------'
+   */
+	[_AL] = KEYMAP(
+        KC_GRV,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_DELETE, \
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,   \
+        KC_TRNS,KC_TRNS,KC_TRNS,          KC_TRNS,               KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
+
+
+   /*
+   * Secondary function layer
+   * ,-------------------------------------------------------------.
+   * | | |  |  |  | | | RW|Play|FF| Mute| Vol Down | Vol up |Reset |
+   * |-------------------------------------------------------------|
+   * |    |   |   |   |  |  |  |   |    |PgUp|    |    |   |       |
+   * |-------------------------------------------------------------|
+   * |      |   |   |   |   |   |  |Home|PgDown|End|  |   |        |
+   * |-------------------------------------------------------------|
+   * |        |   |   |   |   |   |   |    |    |    |   |         |
+   * |-------------------------------------------------------------|
+   * |    |    |    |                          |    |    |    |    |
+   * `-------------------------------------------------------------'
+   */
+	[_FL] = KEYMAP(
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MPRV,KC_MPLY,KC_MNXT,KC_MUTE,KC_VOLD,KC_VOLU,RESET, \
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PGUP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_HOME,KC_TRNS,KC_HOME,KC_PGDN,KC_END,KC_TRNS,KC_TRNS,KC_TRNS, \
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
+        KC_TRNS,KC_TRNS,KC_TRNS,          KC_TRNS,               KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
+
+   /*
+   * Locking layer for controlling the underglow.
+   * NOTE: currently unused.
+   *
+   * ,-----------------------------------------------------------.
+   * |    |  |   |   |   |   |   |   |   |   |   |   |   |       |
+   * |-----------------------------------------------------------|
+   * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |
+   * |-----------------------------------------------------------|
+   * |       |On|Mode|   |   |   |   |   |   |   |   |   |       |
+   * |-----------------------------------------------------------|
+   * |        |   |Hue+|Hue-|Sat+|Sat-|Val+|Val-|  |  |   |      |
+   * |-----------------------------------------------------------|
+   * |    |    |    |                        |    |    |    |    |
+   * `-----------------------------------------------------------'
+   */
+	[_UL] = KEYMAP(
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
+        KC_TRNS,F(4),F(5),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
+        KC_TRNS,KC_TRNS,KC_TRNS,F(6),F(7),F(8),F(9),F(10),F(11),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,   \
+        KC_TRNS,KC_TRNS,KC_TRNS,          KC_TRNS,               KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
+};
+
+enum function_id {
+    RGBLED_TOGGLE,
+    RGBLED_STEP_MODE,
+    RGBLED_INCREASE_HUE,
+    RGBLED_DECREASE_HUE,
+    RGBLED_INCREASE_SAT,
+    RGBLED_DECREASE_SAT,
+    RGBLED_INCREASE_VAL,
+    RGBLED_DECREASE_VAL,
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [0]  = ACTION_LAYER_MOMENTARY(2),  // Momentary Fn overlay
+    [1]  = ACTION_LAYER_TOGGLE(1),     // Toggle Arrow Layer overlay
+    [2]  = ACTION_LAYER_TAP_KEY(2, KC_CAPS), // Tap to toggle caps lock and hold to activate function layer
+    [3]  = ACTION_LAYER_TOGGLE(3),     // Toggle Underglow Layer overlay
+    [4]  = ACTION_FUNCTION(RGBLED_TOGGLE), //Turn on/off underglow
+    [5]  = ACTION_FUNCTION(RGBLED_STEP_MODE), // Change underglow mode
+    [6]  = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
+    [7]  = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
+    [8]  = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
+    [9]  = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
+    [10] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
+    [11] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
+    [12] = ACTION_FUNCTION(SHIFT_ESC),
+    [13] = ACTION_LAYER_TAP_KEY(1, KC_SPACE),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+void matrix_scan_user(void) {
+
+// Layer LED indicators
+// ESC led on when in function layer, WASD cluster leds enabled when on arrow cluster
+    uint32_t layer = layer_state;
+    if (layer & (1<<1)) {
+        gh60_wasd_leds_on();
+    } else {
+        gh60_wasd_leds_off();
+    }
+
+    if (layer & (1<<2)) {
+        gh60_esc_led_on();
+    } else {
+        gh60_esc_led_off();
+    }
+};
+
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  switch (id) {
+    case RGBLED_TOGGLE:
+      //led operations
+      if (record->event.pressed) {
+        rgblight_toggle();
+        }
+        break;
+    case RGBLED_INCREASE_HUE:
+      if (record->event.pressed) {
+        rgblight_increase_hue();
+        }
+        break;
+    case RGBLED_DECREASE_HUE:
+      if (record->event.pressed) {
+        rgblight_decrease_hue();
+        }
+        break;
+    case RGBLED_INCREASE_SAT:
+      if (record->event.pressed) {
+        rgblight_increase_sat();
+        }
+        break;
+    case RGBLED_DECREASE_SAT:
+      if (record->event.pressed) {
+        rgblight_decrease_sat();
+        }
+        break;
+    case RGBLED_INCREASE_VAL:
+        if (record->event.pressed) {
+          rgblight_increase_val();
+        }
+        break;
+    case RGBLED_DECREASE_VAL:
+        if (record->event.pressed) {
+          rgblight_decrease_val();
+        }
+        break;
+    case RGBLED_STEP_MODE:
+        if (record->event.pressed) {
+          rgblight_step();
+        }
+        break;
+    static uint8_t shift_esc_shift_mask;
+    // Shift + ESC = ~
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+    }
+};
diff --git a/keyboards/satan/keymaps/unxmaal/Makefile b/keyboards/satan/keymaps/unxmaal/Makefile
new file mode 100644
index 0000000000..ee94a67b4e
--- /dev/null
+++ b/keyboards/satan/keymaps/unxmaal/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/satan/keymaps/unxmaal/README.md b/keyboards/satan/keymaps/unxmaal/README.md
new file mode 100644
index 0000000000..50ad0cf1fe
--- /dev/null
+++ b/keyboards/satan/keymaps/unxmaal/README.md
@@ -0,0 +1,20 @@
+Unxmaal's GH60 Satan Layout
+=====================
+* Mostly stolen from /u/robotmaxtron
+
+##Quantum MK Firmware
+For the full Quantum feature list, see the parent readme.md.
+
+* Standard Mac ANSI layout
+* Spacebar acts as space when tapped, Fn when held
+* Menu acts as menu when tapped, Fn2 when held
+* Layer1:
+  * Top row = `~, F1-F12, Del
+  * JKIL = arrow cluster
+* Layer2:
+  * Top row = media controls
+  * JKIL = PgDn/Up/Home/Insert
+  * Backspace = Reset
+
+### Additional Credits
+Keymap has been based on various keymaps available from the QMK Repo for the GH60-SATAN and KC60 keyboards.
\ No newline at end of file
diff --git a/keyboards/satan/keymaps/unxmaal/keymap.c b/keyboards/satan/keymaps/unxmaal/keymap.c
new file mode 100644
index 0000000000..657602de02
--- /dev/null
+++ b/keyboards/satan/keymaps/unxmaal/keymap.c
@@ -0,0 +1,119 @@
+#include "satan.h"
+
+
+// Used for SHIFT_ESC
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _AL 1
+#define _FL 2
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+   /*
+   *  ANSI Base, Mac style
+   * ,-----------------------------------------------------------------------------.
+   * |Esc   |  1|   2|   3|   4|   5|   6|   7|   8|   9|   0|   -|   = |   Backsp |
+   * |-----------------------------------------------------------------------------|
+   * |Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I|   O|  P|  [|  ]|     \|
+   * |-----------------------------------------------------------------------------|
+   * |Caps/Fn      |    A|    S|    D|    F|   G|  H|  J|  K|  L|  ;|  '|   Enter  |
+   * |-----------------------------------------------------------------------------|
+   * |Shift      |    Z|     X|    C|     V|  B|  N|  M|  ,|  .|  /|     Shift     |
+   * |-----------------------------------------------------------------------------|
+   * |Fn|Alt |Gui | Space(tapped), Fn(held) |Gui |Alt  |Menu(tapped, Fn2(held)|Ctrl|
+   * `-----------------------------------------------------------------------------'
+   */
+[_BL] = KEYMAP_ANSI(
+  KC_ESC,  KC_1,   KC_2,  KC_3,    KC_4,  KC_5,   KC_6,    KC_7,   KC_8,  KC_9,    KC_0,    KC_MINS,  KC_EQL,   KC_BSPC, \
+  KC_TAB,  KC_Q,   KC_W,  KC_E,    KC_R,  KC_T,   KC_Y,    KC_U,   KC_I,  KC_O,    KC_P,    KC_LBRC,  KC_RBRC,  KC_BSLS, \
+  KC_LCTL, KC_A,   KC_S,  KC_D,    KC_F,  KC_G,   KC_H,    KC_J,   KC_K,  KC_L,    KC_SCLN, KC_QUOT,            KC_ENT,  \
+  KC_LSFT,         KC_Z,  KC_X,    KC_C,  KC_V,   KC_B,    KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH,            KC_RSFT, \
+  MO(_AL), KC_LALT,KC_LGUI,        LT(_AL,KC_SPACE),                      KC_RGUI, KC_RALT, LT(_FL,KC_MENU),    KC_RCTL),
+   /*
+   * Pok3r style arrow cluster
+   * ,-----------------------------------------------------------.
+   * |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL |
+   * |-----------------------------------------------------------|
+   * |     |   |    |   |   |   |   |   |Up|   |   |   |   |     |
+   * |-----------------------------------------------------------|
+   * |       |   |   |   |   |   |   |Left|Down|Right|   |   |   |
+   * |-----------------------------------------------------------|
+   * |        |   |   |   |   |   |   |   |   |   |   |          |
+   * |-----------------------------------------------------------|
+   * |    |    |    |                        |    |    |    |    |
+   * `-----------------------------------------------------------'
+   */
+[_AL] = KEYMAP_ANSI(
+  KC_GRV,  KC_F1,  KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_DELETE, \
+  KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
+  KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS, \
+  KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
+  KC_TRNS, KC_TRNS,KC_TRNS,          KC_TRNS,               KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
+  /* Keymap _FL: Function Layer
+   * ,-----------------------------------------------------------.
+   * |   |   |   |   |   |   |   |   |   |   |   |   |   |  RESET|
+   * |-----------------------------------------------------------|
+   * |     |   |   |   |   |   |   |   |   |   |   |BL-|BL+|BL   |
+   * |-----------------------------------------------------------|
+   * |      |   |   |   |   |   |   |       |   |   |   |        |
+   * |-----------------------------------------------------------|
+   * |  | RGB on|RGB step|Hue+|Hue- |Sat+|Sat-|Val+| Val-| | |   |
+   * |-----------------------------------------------------------|
+   * |    |    |    |                        |    |    |    |    |
+   * `-----------------------------------------------------------'
+   */
+[_FL] = KEYMAP_ANSI(
+  #ifdef RGBLIGHT_ENABLE
+  _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET,  \
+  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC,BL_INC, BL_TOGG, \
+  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______, \
+  _______,RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,_______,_______,_______, \
+  _______,_______,_______,                 _______,                       _______,_______,_______, _______),
+  #else
+  _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET,  \
+  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC, BL_INC,BL_TOGG, \
+  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
+  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
+  _______,_______,_______,                _______,                        _______,_______,_______,_______),
+  #endif
+};
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}