Merge branch 'master' of https://github.com/jackhumbert/qmk_firmware

56 files changed, 870 insertions, 377 deletions

diff --git a/keyboards/alps64/matrix.c b/keyboards/alps64/matrix.c
index 805999d4a1..b3508850de 100644
--- a/keyboards/alps64/matrix.c
+++ b/keyboards/alps64/matrix.c
@@ -100,6 +100,8 @@ uint8_t matrix_scan(void)
         }
     }
 
+    matrix_scan_quantum();
+
     return 1;
 }
 
diff --git a/keyboards/clueboard/Makefile b/keyboards/clueboard/Makefile
new file mode 100644
index 0000000000..ccc01ea9a7
--- /dev/null
+++ b/keyboards/clueboard/Makefile
@@ -0,0 +1,109 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+SUBPROJECT_DEFAULT = rev2
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+AUDIO_ENABLE ?= no
+RGBLIGHT_ENABLE ?= no   # Enable keyboard underlight functionality
+MIDI_ENABLE ?= no 		# MIDI controls
+UNICODE_ENABLE ?= no 		# Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif
diff --git a/keyboards/clueboard1/clueboard1.c b/keyboards/clueboard/clueboard.c
index 5785f447f0..13195bda6b 100644
--- a/keyboards/clueboard1/clueboard1.c
+++ b/keyboards/clueboard/clueboard.c
@@ -1,4 +1,9 @@
-#include "clueboard1.h"
+#include "clueboard.h"
+
+void led_init_ports() {
+    // * Set our LED pins as output
+    DDRB |= (1<<4);
+}
 
 void led_set_kb(uint8_t usb_led) {
     DDRF |= (1<<0);
diff --git a/keyboards/clueboard/clueboard.h b/keyboards/clueboard/clueboard.h
new file mode 100644
index 0000000000..4f2a3c1df1
--- /dev/null
+++ b/keyboards/clueboard/clueboard.h
@@ -0,0 +1,13 @@
+#ifndef CLUEBOARD_H
+#define CLUEBOARD_H
+
+#ifdef SUBPROJECT_rev1
+    #include "rev1.h"
+#endif
+#ifdef SUBPROJECT_rev2
+    #include "rev2.h"
+#endif
+
+#include "quantum.h"
+
+#endif
diff --git a/keyboards/clueboard1/config.h b/keyboards/clueboard/config.h
index 16338ddb03..ceac80795b 100644
--- a/keyboards/clueboard1/config.h
+++ b/keyboards/clueboard/config.h
@@ -22,29 +22,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xC1ED
-#define PRODUCT_ID      0x2301
-#define DEVICE_VER      0x0003
 #define MANUFACTURER    Clueboard
 #define PRODUCT         Clueboard
 #define DESCRIPTION     QMK keyboard firmware for Clueboard
 
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 16
-
-// ROWS: Top to bottom, COLS: Left to right
-/* Column pin configuration
-* col: 0  1  2  3  4  5  6  7  8  9  10 11 12 13 14 15
-* pin: B3 F1 F4 F5 F6 C7 C6 B6 B5 B4 D7 D6 D4 F7 B0 B1
-*/
-#define MATRIX_COL_PINS { B3, F1, F4, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, F7, B0, B1 }
-/* Row pin configuration
-* row: 0  1  2  3  4
-* pin: D1 D0 D2 D5 D3
-*/
-#define MATRIX_ROW_PINS { D1, D0, D2, D5, D3 }
-#define UNUSED_PINS
-
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
@@ -64,16 +45,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* Underlight configuration
- */
- #define ws2812_PORTREG PORTB
- #define ws2812_DDRREG DDRB
- #define ws2812_pin 2
- #define RGBLED_NUM 14     // Number of LEDs
- #define RGBLIGHT_HUE_STEP 10
- #define RGBLIGHT_SAT_STEP 17
- #define RGBLIGHT_VAL_STEP 17
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -92,4 +63,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
+
+#ifdef SUBPROJECT_rev1
+    #include "rev1/config.h"
+#endif
+#ifdef SUBPROJECT_rev2
+    #include "rev2/config.h"
+#endif
+
 #endif
diff --git a/keyboards/clueboard2/keymaps/default/keymap.c b/keyboards/clueboard/keymaps/default/keymap.c
index 1795e68cda..89f71e83a7 100644
--- a/keyboards/clueboard2/keymaps/default/keymap.c
+++ b/keyboards/clueboard/keymaps/default/keymap.c
@@ -1,4 +1,4 @@
-#include "clueboard2.h"
+#include "clueboard.h"
 
 // Used for SHIFT_ESC
 #define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
@@ -138,6 +138,7 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
       if (record->event.pressed) {
         rgblight_toggle();
       }
+
       break;
     case RGBLED_INCREASE_HUE:
       if (record->event.pressed) {
diff --git a/keyboards/clueboard/keymaps/max/Makefile b/keyboards/clueboard/keymaps/max/Makefile
new file mode 100644
index 0000000000..950dadf841
--- /dev/null
+++ b/keyboards/clueboard/keymaps/max/Makefile
@@ -0,0 +1,49 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Build Options
+#   change to "no" to disable the options, or define them in the makefile.mk in 
+#   the appropriate keymap folder that will get included automatically
+#
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/clueboard2/keymaps/max/keymap.c b/keyboards/clueboard/keymaps/max/keymap.c
index 65a101c2b5..82c93401db 100644
--- a/keyboards/clueboard2/keymaps/max/keymap.c
+++ b/keyboards/clueboard/keymaps/max/keymap.c
@@ -1,4 +1,4 @@
-#include "clueboard2.h"
+#include "clueboard.h"
 
 // Used for SHIFT_ESC
 #define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
diff --git a/keyboards/clueboard2/keymaps/skully/keymap.c b/keyboards/clueboard/keymaps/skully/keymap.c
index 74a03f2f30..df6f054e07 100644
--- a/keyboards/clueboard2/keymaps/skully/keymap.c
+++ b/keyboards/clueboard/keymaps/skully/keymap.c
@@ -1,4 +1,4 @@
-#include "clueboard2.h"
+#include "clueboard.h"
 
 // Used for SHIFT_ESC
 #define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
diff --git a/keyboards/clueboard/rev1/Makefile b/keyboards/clueboard/rev1/Makefile
new file mode 100644
index 0000000000..80a942d06f
--- /dev/null
+++ b/keyboards/clueboard/rev1/Makefile
@@ -0,0 +1,5 @@
+BACKLIGHT_ENABLE = no
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
diff --git a/keyboards/clueboard/rev1/config.h b/keyboards/clueboard/rev1/config.h
new file mode 100644
index 0000000000..9bb58f56e8
--- /dev/null
+++ b/keyboards/clueboard/rev1/config.h
@@ -0,0 +1,37 @@
+#ifndef REV2_CONFIG_H
+#define REV2_CONFIG_H
+
+#include "../config.h"
+
+#define PRODUCT_ID      0x2301
+#define DEVICE_VER      0x0003
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+// ROWS: Top to bottom, COLS: Left to right
+/* Column pin configuration
+* col: 0  1  2  3  4  5  6  7  8  9  10 11 12 13 14 15
+* pin: B3 F1 F4 F5 F6 C7 C6 B6 B5 B4 D7 D6 D4 F7 B0 B1
+*/
+#define MATRIX_COL_PINS { B3, F1, F4, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, F7, B0, B1 }
+/* Row pin configuration
+* row: 0  1  2  3  4
+* pin: D1 D0 D2 D5 D3
+*/
+#define MATRIX_ROW_PINS { D1, D0, D2, D5, D3 }
+#define UNUSED_PINS
+
+/* Underlight configuration
+ */
+#define ws2812_PORTREG PORTB
+#define ws2812_DDRREG DDRB
+#define ws2812_pin 2
+#define RGBLED_NUM 14     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+
+#endif
\ No newline at end of file
diff --git a/keyboards/clueboard/rev1/rev1.c b/keyboards/clueboard/rev1/rev1.c
new file mode 100644
index 0000000000..520a869e57
--- /dev/null
+++ b/keyboards/clueboard/rev1/rev1.c
@@ -0,0 +1 @@
+#include "rev1.h"
diff --git a/keyboards/clueboard1/clueboard1.h b/keyboards/clueboard/rev1/rev1.h
index 3c6c333420..abdfd079b3 100644
--- a/keyboards/clueboard1/clueboard1.h
+++ b/keyboards/clueboard/rev1/rev1.h
@@ -1,8 +1,7 @@
-#ifndef CLUEBOARD1_H
-#define CLUEBOARD1_H
-
-#include "quantum.h"
+#ifndef REV1_H
+#define REV1_H
 
+#include "../clueboard.h"
 
 /* Clueboard matrix layout
  * ,-----------------------------------------------------------.  ,---.
@@ -30,6 +29,7 @@
  */
 // The first section contains all of the arguements
 // The second converts the arguments into a two-dimensional array
+
 #define KEYMAP( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \
     k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D,      k1F, \
diff --git a/keyboards/clueboard/rev2/Makefile b/keyboards/clueboard/rev2/Makefile
new file mode 100644
index 0000000000..cea967b795
--- /dev/null
+++ b/keyboards/clueboard/rev2/Makefile
@@ -0,0 +1,5 @@
+BACKLIGHT_ENABLE = yes
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
diff --git a/keyboards/clueboard/rev2/config.h b/keyboards/clueboard/rev2/config.h
new file mode 100644
index 0000000000..e2f8336beb
--- /dev/null
+++ b/keyboards/clueboard/rev2/config.h
@@ -0,0 +1,40 @@
+#ifndef REV2_CONFIG_H
+#define REV2_CONFIG_H
+
+#include "../config.h"
+
+#define PRODUCT_ID      0x2320
+#define DEVICE_VER      0x0001
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+// ROWS: Top to bottom, COLS: Left to right
+/* Row pin configuration
+* row: 0  1  2  3  4  5  6  7  8  9
+* pin: B2 C7 C6 B6 B5 B0 B3 D5 D3 D2
+*/
+#define MATRIX_ROW_PINS { B2, C7, C6, B6, B5, B0, B3, D5, D3, D2 }
+/* Column pin configuration
+ * col: 0  1  2  3  4  5  6  7
+ * pin: F0 F1 F4 F5 F6 F7 E6 B1
+ */
+#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, E6, B1 }
+#define UNUSED_PINS
+
+ /* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 1
+
+/* Underlight configuration
+ */
+#define ws2812_PORTREG PORTD
+#define ws2812_DDRREG DDRD
+#define ws2812_pin 7
+#define RGBLED_NUM 14     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+#endif
\ No newline at end of file
diff --git a/keyboards/clueboard/rev2/rev2.c b/keyboards/clueboard/rev2/rev2.c
new file mode 100644
index 0000000000..7a8ec368e6
--- /dev/null
+++ b/keyboards/clueboard/rev2/rev2.c
@@ -0,0 +1,47 @@
+#include "rev2.h"
+#include <avr/io.h>
+#include "backlight.h"
+#include "print.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+
+    // JTAG disable for PORT F. write JTD bit twice within four cycles.
+    MCUCR |= (1<<JTD);
+    MCUCR |= (1<<JTD);
+}
+
+
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+void backlight_init_ports(void) {
+    print("init_backlight_pin()\n");
+    // Set our LED pins as output
+    DDRD |= (1<<6); // Esc
+    DDRB |= (1<<7); // Page Up
+    DDRD |= (1<<4); // Arrows
+
+    // Set our LED pins low
+    PORTD &= ~(1<<6); // Esc
+    PORTB &= ~(1<<7); // Page Up
+    PORTD &= ~(1<<4); // Arrows
+}
+
+void backlight_set(uint8_t level) {
+    if ( level == 0 ) {
+        // Turn off light
+        PORTD |= (1<<6); // Esc
+        PORTB |= (1<<7); // Page Up
+        PORTD |= (1<<4); // Arrows
+    } else {
+        // Turn on light
+        PORTD &= ~(1<<6); // Esc
+        PORTB &= ~(1<<7); // Page Up
+        PORTD &= ~(1<<4); // Arrows
+    }
+}
diff --git a/keyboards/clueboard2/clueboard2.h b/keyboards/clueboard/rev2/rev2.h
index e474b31019..912de405da 100644
--- a/keyboards/clueboard2/clueboard2.h
+++ b/keyboards/clueboard/rev2/rev2.h
@@ -1,8 +1,7 @@
-#ifndef CLUEBOARD2_H
-#define CLUEBOARD2_H
-
-#include "quantum.h"
+#ifndef REV2_H
+#define REV2_H
 
+#include "../clueboard.h"
 
 /* Clueboard matrix layout
  * ,-----------------------------------------------------------.  ,---.
@@ -30,6 +29,7 @@
  */
 // The first section contains all of the arguments
 // The second converts the arguments into a two-dimensional array
+
 #define KEYMAP( \
     k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k56, k57, \
     k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65,      k67, \
diff --git a/keyboards/clueboard1/keymaps/default/keymap.c b/keyboards/clueboard1/keymaps/default/keymap.c
deleted file mode 100644
index 3f4f3c4149..0000000000
--- a/keyboards/clueboard1/keymaps/default/keymap.c
+++ /dev/null
@@ -1,184 +0,0 @@
-#include "clueboard1.h"
-
-#ifdef RGBLIGHT_ENABLE
-#include "rgblight.h"
-#endif
-
-// Used for SHIFT_ESC
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _BL 0
-#define _FL 1
-#define _RS 2
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  /* Keymap _BL: (Base Layer) Default Layer
-   * ,--------------------------------------------------------------------------.  ,----.
-   * |Esc~|   1|   2|   3|   4|   5|   6|   7|   8|   9|   0|   -|   =|   \|  BS|  |PGUP|
-   * |--------------------------------------------------------------------------|  |----|
-   * |   Tab|   Q|   W|   E|   R|   T|   Y|   U|   I|   O|   P|   [|   ]|      \|  |PGDN|
-   * |--------------------------------------------------------------------------|  `----'
-   * |Capslck|   A|   S|   D|   F|   G|   H|   J|   K|   L|   ;|   '|   # |  Ent|
-   * |-----------------------------------------------------------------------------.
-   * |Shift|  BS|   Z|   X|   C|   V|   B|   N|   M|   ,|   .|   /|   BS|Shift|  UP|
-   * |------------------------------------------------------------------------|----|----.
-   * | Ctrl|  Gui|  Alt| MHen|    Space|    Space|  Hen|  Alt| Ctrl|  _FL|LEFT|DOWN|RGHT|
-   * `----------------------------------------------------------------------------------'
-   */
-[_BL] = KEYMAP(
-  F(0),    KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,     KC_MINS,  KC_EQL,   KC_GRV,  KC_BSPC,          KC_PGUP, \
-  KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_