Merge remote-tracking branch 'origin/master' into develop

26 files changed, 1478 insertions, 0 deletions

diff --git a/keyboards/idobao/id87/v2/config.h b/keyboards/idobao/id87/v2/config.h
new file mode 100644
index 0000000000..8a2c58aa2d
--- /dev/null
+++ b/keyboards/idobao/id87/v2/config.h
@@ -0,0 +1,163 @@
+// Copyright 2022 peepeetee (@peepeetee)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x6964   // "id"
+#define PRODUCT_ID      0x0087
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    IDOBAO
+#define PRODUCT         ID87
+
+/* key matrix size */
+#define MATRIX_ROWS 11
+#define MATRIX_COLS 9
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { E6, B0, B1, B2, B3, B7, F7, F6, F5, F4, F1 }
+
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4 }
+//#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION ROW2COL
+
+#define LED_CAPS_LOCK_PIN C7
+
+//#define BACKLIGHT_PIN B7
+//#define BACKLIGHT_LEVELS 3
+//#define BACKLIGHT_BREATHING
+
+#define RGB_DI_PIN E2
+#    define DRIVER_LED_TOTAL 103 /* 16 Bottom 87 top*/
+#ifdef RGB_DI_PIN
+#    define RGBLED_NUM 103 /* 16 Bottom 87 top*/
+#    define RGB_MATRIX_KEYPRESSES // reacts to keypresses
+#endif
+#ifdef RGB_MATRIX_ENABLE
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 // Limit to vendor-recommended value
+// RGB Matrix Animation modes. Explicitly enabled
+// For full list of effects, see:
+// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
+#    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#    define RGB_MATRIX_KEYPRESSES
+#    define ENABLE_RGB_MATRIX_ALPHAS_MODS
+#    define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_BREATHING
+#    define ENABLE_RGB_MATRIX_BAND_SAT
+#    define ENABLE_RGB_MATRIX_BAND_VAL
+#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#    define ENABLE_RGB_MATRIX_CYCLE_ALL
+#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#    define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#    define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#    define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+#    define ENABLE_RGB_MATRIX_DUAL_BEACON
+#    define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+#    define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#    define ENABLE_RGB_MATRIX_RAINDROPS
+#    define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#    define ENABLE_RGB_MATRIX_HUE_BREATHING
+#    define ENABLE_RGB_MATRIX_HUE_PENDULUM
+#    define ENABLE_RGB_MATRIX_HUE_WAVE
+#    define ENABLE_RGB_MATRIX_PIXEL_RAIN
+#    define ENABLE_RGB_MATRIX_PIXEL_FLOW
+#    define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
+// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
+#    define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+#    define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#    define ENABLE_RGB_MATRIX_SPLASH
+#    define ENABLE_RGB_MATRIX_MULTISPLASH
+#    define ENABLE_RGB_MATRIX_SOLID_SPLASH
+#    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
+#endif
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/idobao/id87/v2/info.json b/keyboards/idobao/id87/v2/info.json
new file mode 100644
index 0000000000..e4e252aa64
--- /dev/null
+++ b/keyboards/idobao/id87/v2/info.json
@@ -0,0 +1,98 @@
+{
+    "keyboard_name": "ID87",
+    "url": "https://www.idobao.net/products/idobao-id87-80-hot-swappable-mechanical-keyboard-kit",
+    "maintainer": "qmk",
+    "layouts": {
+        "LAYOUT_tkl_ansi": {
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"F1", "x":2, "y":0},
+                {"label":"F2", "x":3, "y":0},
+                {"label":"F3", "x":4, "y":0},
+                {"label":"F4", "x":5, "y":0},
+                {"label":"F5", "x":6.5, "y":0},
+                {"label":"F6", "x":7.5, "y":0},
+                {"label":"F7", "x":8.5, "y":0},
+                {"label":"F8", "x":9.5, "y":0},
+                {"label":"F9", "x":11, "y":0},
+                {"label":"F10", "x":12, "y":0},
+                {"label":"F11", "x":13, "y":0},
+                {"label":"F12", "x":14, "y":0},
+                {"label":"PrtSc", "x":15.25, "y":0},
+                {"label":"Scroll Lock", "x":16.25, "y":0},
+                {"label":"Pause", "x":17.25, "y":0},
+                {"label":"~", "x":0, "y":1.5},
+                {"label":"1", "x":1, "y":1.5},
+                {"label":"2", "x":2, "y":1.5},
+                {"label":"3", "x":3, "y":1.5},
+                {"label":"4", "x":4, "y":1.5},
+                {"label":"5", "x":5, "y":1.5},
+                {"label":"6", "x":6, "y":1.5},
+                {"label":"7", "x":7, "y":1.5},
+                {"label":"8", "x":8, "y":1.5},
+                {"label":"9", "x":9, "y":1.5},
+                {"label":"0", "x":10, "y":1.5},
+                {"label":"-", "x":11, "y":1.5},
+                {"label":"=", "x":12, "y":1.5},
+                {"label":"Backspace", "x":13, "y":1.5, "w":2},
+                {"label":"Insert", "x":15.25, "y":1.5},
+                {"label":"Home", "x":16.25, "y":1.5},
+                {"label":"PgUp", "x":17.25, "y":1.5},
+                {"label":"Tab", "x":0, "y":2.5, "w":1.5},
+                {"label":"Q", "x":1.5, "y":2.5},
+                {"label":"W", "x":2.5, "y":2.5},
+                {"label":"E", "x":3.5, "y":2.5},
+                {"label":"R", "x":4.5, "y":2.5},
+                {"label":"T", "x":5.5, "y":2.5},
+                {"label":"Y", "x":6.5, "y":2.5},
+                {"label":"U", "x":7.5, "y":2.5},
+                {"label":"I", "x":8.5, "y":2.5},
+                {"label":"O", "x":9.5, "y":2.5},
+                {"label":"P", "x":10.5, "y":2.5},
+                {"label":"[", "x":11.5, "y":2.5},
+                {"label":"]", "x":12.5, "y":2.5},
+                {"label":"\\", "x":13.5, "y":2.5, "w":1.5},
+                {"label":"Delete", "x":15.25, "y":2.5},
+                {"label":"End", "x":16.25, "y":2.5},
+                {"label":"PgDn", "x":17.25, "y":2.5},
+                {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
+                {"label":"A", "x":1.75, "y":3.5},
+                {"label":"S", "x":2.75, "y":3.5},
+                {"label":"D", "x":3.75, "y":3.5},
+                {"label":"F", "x":4.75, "y":3.5},
+                {"label":"G", "x":5.75, "y":3.5},
+                {"label":"H", "x":6.75, "y":3.5},
+                {"label":"J", "x":7.75, "y":3.5},
+                {"label":"K", "x":8.75, "y":3.5},
+                {"label":"L", "x":9.75, "y":3.5},
+                {"label":";", "x":10.75, "y":3.5},
+                {"label":"'", "x":11.75, "y":3.5},
+                {"label":"Enter", "x":12.75, "y":3.5, "w":2.25},
+                {"label":"Shift", "x":0, "y":4.5, "w":2.25},
+                {"label":"Z", "x":2.25, "y":4.5},
+                {"label":"X", "x":3.25, "y":4.5},
+                {"label":"C", "x":4.25, "y":4.5},
+                {"label":"V", "x":5.25, "y":4.5},
+                {"label":"B", "x":6.25, "y":4.5},
+                {"label":"N", "x":7.25, "y":4.5},
+                {"label":"M", "x":8.25, "y":4.5},
+                {"label":",", "x":9.25, "y":4.5},
+                {"label":".", "x":10.25, "y":4.5},
+                {"label":"/", "x":11.25, "y":4.5},
+                {"label":"Shift", "x":12.25, "y":4.5, "w":2.75},
+                {"label":"Up", "x":16.25, "y":4.5},
+                {"label":"Ctrl", "x":0, "y":5.5, "w":1.25},
+                {"label":"Win", "x":1.25, "y":5.5, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":5.5, "w":1.25},
+                {"label":"Space", "x":3.75, "y":5.5, "w":6.25},
+                {"label":"Alt", "x":10, "y":5.5, "w":1.25},
+                {"label":"Win", "x":11.25, "y":5.5, "w":1.25},
+                {"label":"LT(1, KC_APP)", "x":12.5, "y":5.5, "w":1.25},
+                {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25},
+                {"label":"Left", "x":15.25, "y":5.5},
+                {"label":"Down", "x":16.25, "y":5.5},
+                {"label":"Right", "x":17.25, "y":5.5}
+            ]
+        }
+    }
+}
diff --git a/keyboards/idobao/id87/v2/keymaps/default/keymap.c b/keyboards/idobao/id87/v2/keymaps/default/keymap.c
new file mode 100644
index 0000000000..2b07bdb0ec
--- /dev/null
+++ b/keyboards/idobao/id87/v2/keymaps/default/keymap.c
@@ -0,0 +1,35 @@
+/*
+Copyright 2020 Tybera
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_tkl_ansi(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,       KC_F5,   KC_F6,   KC_F7,   KC_F8,        KC_F9,   KC_F10,  KC_F11,  KC_F12,    KC_PSCR, KC_SLCK, KC_PAUS,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,            KC_INS,  KC_HOME, KC_PGUP,
+        KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,        KC_DEL,  KC_END,  KC_PGDN,
+        KC_CAPS,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+        KC_LSFT,            KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                            KC_UP,
+        KC_LCTL,   KC_LGUI,   KC_LALT,                       KC_SPC,                              KC_RALT,   KC_RGUI,   LT(1, KC_APP),     KC_RCTL,      KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT_tkl_ansi(
+        RESET,            _______, _______, _______, _______,     _______, _______, _______, _______,      _______, _______, _______, _______,   _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,            _______, RGB_HUI, _______,
+        _______,     BL_TOGG, RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,        RGB_VAI, RGB_SAI, _______,
+        _______,       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,            _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______,                            BL_INC,
+        _______,   _______,   _______,                      _______,                              _______,   _______,   _______,   _______,      BL_INC,  BL_DEC, RGB_MOD
+    ),
+
+};
diff --git a/keyboards/idobao/id87/v2/keymaps/default/readme.md b/keyboards/idobao/id87/v2/keymaps/default/readme.md
new file mode 100644
index 0000000000..6054431de4
--- /dev/null
+++ b/keyboards/idobao/id87/v2/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for id87
\ No newline at end of file
diff --git a/keyboards/idobao/id87/v2/keymaps/via/keymap.c b/keyboards/idobao/id87/v2/keymaps/via/keymap.c
new file mode 100644
index 0000000000..534784555c
--- /dev/null
+++ b/keyboards/idobao/id87/v2/keymaps/via/keymap.c
@@ -0,0 +1,50 @@
+/*
+Copyright 2020 Tybera
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = LAYOUT_tkl_ansi(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,       KC_F5,   KC_F6,   KC_F7,   KC_F8,        KC_F9,   KC_F10,  KC_F11,  KC_F12,    KC_PSCR, KC_SLCK, KC_PAUS,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,            KC_INS,  KC_HOME, KC_PGUP,
+        KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,        KC_DEL,  KC_END,  KC_PGDN,
+        KC_CAPS,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+        KC_LSFT,            KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                            KC_UP,
+        KC_LCTL,   KC_LGUI,   KC_LALT,                       KC_SPC,                              KC_RALT,   KC_RGUI,   LT(1, KC_APP),     KC_RCTL,      KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT_tkl_ansi(
+        RESET,            _______, _______, _______, _______,     _______, _______, _______, _______,      _______, _______, _______, _______,   _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,            _______, RGB_HUI, _______,
+        _______,     BL_TOGG, RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,        RGB_VAI, RGB_SAI, _______,
+        _______,       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,            _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______,                            BL_INC,
+        _______,   _______,   _______,                      _______,                              _______,   _______,   _______,   _______,      BL_INC,  BL_DEC, RGB_MOD
+    ),
+	[2] = LAYOUT_tkl_ansi(
+        _______,            _______, _______, _______, _______,     _______, _______, _______, _______,      _______, _______, _______, _______,   _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,            _______, _______, _______,
+        _______,     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,        _______, _______, _______,
+        _______,       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,            _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                            _______,
+        _______,   _______,   _______,                      _______,                              _______,   _______,   _______,   _______,      _______,  _______, _______
+                ),
+	[3] = LAYOUT_tkl_ansi(
+                _______,            _______, _______, _______, _______,     _______, _______, _______, _______,      _______, _______, _______, _______,   _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,            _______, _______, _______,
+        _______,     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,        _______, _______, _______,
+        _______,       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,            _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                            _______,
+        _______,   _______,   _______,                      _______,                              _______,   _______,   _______,   _______,      _______,  _______, _______
+                ),
+};
diff --git a/keyboards/idobao/id87/v2/keymaps/via/rules.mk b/keyboards/idobao/id87/v2/keymaps/via/rules.mk
new file mode 100644
index 0000000000..ca9fed0e6b
--- /dev/null
+++ b/keyboards/idobao/id87/v2/keymaps/via/rules.mk
@@ -0,0 +1,2 @@
+LTO_ENABLE = yes
+VIA_ENABLE = yes
diff --git a/keyboards/idobao/id87/v2/readme.md b/keyboards/idobao/id87/v2/readme.md
new file mode 100644
index 0000000000..06a3f2c08a
--- /dev/null
+++ b/keyboards/idobao/id87/v2/readme.md
@@ -0,0 +1,27 @@
+# ID87 v2
+
+![ID87 v2](https://i.imgur.com/woTSycN.jpg)
+
+A TKL keyboard with hotswap sockets and in switch RGB.
+
+* Keyboard Maintainer: [peepeetee](https://github.com/peepeetee)
+* Hardware Supported: ID87 v2
+* Hardware Availability: [Drop](https://drop.com/buy/idobao-id87-v2-tkl-mechanical-keyboard-kit), [idobao](https://idobao.net/products/idobao-id87-v2-tkl-pcb-mounted-hot-swappable-mechanical-keyboard-kit)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make idobao/id87/v2:default
+
+Flashing example for this keyboard:
+
+    make idobao/id87/v2:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
diff --git a/keyboards/idobao/id87/v2/rules.mk b/keyboards/idobao/id87/v2/rules.mk
new file mode 100644
index 0000000000..1d519258e3
--- /dev/null
+++ b/keyboards/idobao/id87/v2/rules.mk
@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE =  no       # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = WS2812
+
+LAYOUTS = tkl_ansi
diff --git a/keyboards/idobao/id87/v2/v2.c b/keyboards/idobao/id87/v2/v2.c
new file mode 100644
index 0000000000..5bca630ca3
--- /dev/null
+++ b/keyboards/idobao/id87/v2/v2.c
@@ -0,0 +1,45 @@
+// Copyright 2022 peepeetee (@peepeetee)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "v2.h"
+
+#ifdef RGB_MATRIX_ENABLE
+led_config_t g_led_config = { {
+    // Key Matrix to LED Index
+    { 102,   NO_LED,   101,   100,   99,   98,   97,   96,   95   }, //0
+    { 70,   71,   72,   73,   74,   75,   76,   77,   78   }, //1
+    { 69,   68,   67,   66,   65,   64,   63,   62,   61   }, //2
+    { 40,   41,   42,   43,   44,   45,   46,   47,   48   }, //3
+    { 39,   NO_LED,   38,   37,   36,   35,   34,   33,   32   }, //4
+    { 16,   17,   18,   23,   22,   NO_LED,   19,   21,   20   }, //5
+    { NO_LED,   87,   88,   90,   91,   92,   89,   93,   94   }, //6
+    { 80,   86,   85,   83,   NO_LED,   82,   84,   81,   79   }, //7
+    { NO_LED,   53,   54,   56,   57,   58,   55,   59,   60   }, //8
+    { NO_LED,   NO_LED,   27,   52,   NO_LED,   51,   NO_LED,   50,   49   }, //9
+    { NO_LED,   26,   25,   NO_LED,   28,   29,   24,   30,   31   } //A
+}, {
+    // LED Index to Physical Position
+    {  13,  51 },{ 40,  51},{ 73,  51},{ 108,  51},{ 141,  51},{ 174,  51},{ 207,  51},
+    { 207,  32},
+    { 207,  13},{ 174,  13},{ 141,  13},{ 108,  13},{ 73,  13},{ 40,  13},{ 13,  13},
+    { 13,  32},
+
+{   8,  59 }, {  23,  59 }, {  38,  59 }, {  83,  59 }, { 129,  59 }, { 144,  59 }, { 159,  59 }, { 174,  59 }, { 193,  59 }, { 205,  59 }, { 217,  59 },
+{ 205,  49 }, { 165,  49 }, { 142,  49 }, { 130,  49 }, { 118,  49 }, { 106,  49 }, {  94,  49 }, {  82,  49 }, {  70,  49 }, {  58,  49 }, {  46,  49 }, {  34,  49 }, {  14,  49 },
+{  11,  39 }, {  28,  39 }, {  40,  39 }, {  52,  39 }, {  64,  39 }, {  76,  39 }, {  88,  39 }, { 100,  39 }, { 112,  39 }, { 124,  39 }, { 136,  39 }, { 148,  39 }, { 168,  39 },
+{ 217,  30 }, { 205,  30 }, { 193,  30 }, { 172,  30 }, { 157,  30 }, { 145,  30 }, { 133,  30 }, { 121,  30 }, { 109,  30 }, {  97,  30 }, {  85,  30 }, {  73,  30 }, {  61,  30 }, {  49,  30 }, {  37,  30 }, {  25,  30 }, {  10,  30 },
+{   7,  20 }, {  19,  20 }, {  31,  20 }, {  43,  20 }, {  55,  20 }, {  67,  20 }, {  79,  20 }, {  91,  20 }, { 103,  20 }, { 115,  20 }, { 127,  20 }, { 139,  20 }, { 151,  20 }, { 169,  20 }, { 193,  20 }, { 205,  20 }, { 217,  20 },
+{ 217,   5 }, { 205,   5 }, { 193,   5 }, { 175,   5 }, { 163,   5 }, { 151,   5 }, { 139,   5 }, { 121,   5 },  { 109,   5 }, {  97,   5 },  {  85,   5 },  {  67,   5 }, {  55,   5 }, {  43,   5 }, {  31,   5 },{   7,   5 },
+}, {
+    // LED Index to Flag
+2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
+
+1,1,1,4,1,1,1,1,1,1,1,
+1,1,4,4,4,4,4,4,4,4,4,4,1,
+9,4,4,4,4,4,4,4,4,4,4,4,1,
+1,1,1,4,4,4,4,4,4,4,4,4,4,4,4,4,1,
+4,4,4,4,4,4,4,4,4,4,4,4,4,1,1,1,1,
+1,9,1,4,4,4,4,1,1,1,1,4,4,4,4,1
+} };
+
+#endif
diff --git a/keyboards/idobao/id87/v2/v2.h b/keyboards/idobao/id87/v2/v2.h
new file mode 100644
index 0000000000..1a75d95755
--- /dev/null
+++ b/keyboards/idobao/id87/v2/v2.h
@@ -0,0 +1,40 @@
+/*
+Copyright 2020 Tybera
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_tkl_ansi( \
+    K00,      K02, K03, K04, K05,   K06, K07, K08, K68,    K67, K65, K64, K63,  K66, K62, K61,  \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K78, K70, K77, K75, K73,       K76, K72, K71,  \
+    K20,   K21, K22, K23, K24, K25, K26, K27, K28, K88, K87, K85, K84, K83,     K86, K82, K81,  \
+    K30,    K31, K32, K33, K34, K35, K36, K37, K38, K98, K97, K95, K93,                         \
+    K40,       K42, K43, K44, K45, K46, K47, K48, KA8, KA7, KA5, KA4,                K92,       \
+    K50,  K51,  K52,              K56,                K58,  K57,  K54,  K53,    KA6, KA2, KA1   \
+) { \
+    { K00,   KC_NO, K02,   K03,   K04,   K05,   K06,   K07,   K08   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28   }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38   }, \
+    { K40,   KC_NO, K42,   K43,   K44,   K45,   K46,   K47,   K48   }, \
+    { K50,   K51,   K52,   K53,   K54,   KC_NO, K56,   K57,   K58   }, \
+    { KC_NO, K61,   K62,   K63,   K64,   K65,   K66,   K67,   K68   }, \
+    { K70,   K71,   K72,   K73,   KC_NO, K75,   K76,   K77,   K78   }, \
+    { KC_NO, K81,   K82,   K83,   K84,   K85,   K86,   K87,   K88   }, \
+    { KC_NO, KC_NO, K92,   K93,   KC_NO, K95,   KC_NO, K97,   K98   }, \
+    { KC_NO, KA1,   KA2,   KC_NO, KA4,   KA5,   KA6,   KA7,   KA8   }, \
+}
+
+
diff --git a/keyboards/winry/winry315/config.h b/keyboards/winry/winry315/config.h
new file mode 100644
index 0000000000..1a9617c1e3
--- /dev/null
+++ b/keyboards/winry/winry315/config.h
@@ -0,0 +1,138 @@
+// Copyright 2022 Sergey Vlasov (@sigprof)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "config_common.h"
+
+// Key matrix size.
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 24
+
+// Key pins (including encoder press switches).
+// The NO_PIN entries are reserved for encoder rotation mappings.
+#define DIRECT_PINS                                                                                                                \
+    {                                                                                                                              \
+        { F4, C7, D4, D5, D1, F5, C6, D6, D3, D2, F6, B6, D7, B4, B5, B2, D0, E6, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN } \
+    }
+
+// clang-format off
+
+// Encoder pins.
+// Encoder numbering (assuming the default board orientation with encoders on
+// the top side):
+//   0 - left
+//   1 - center (with a longer shaft and a larger knob)
+//   2 - right
+#define ENCODERS_PAD_A { F1, B0, B3 }
+#define ENCODERS_PAD_B { F0, B1, B7 }
+#define ENCODER_RESOLUTION 4
+
+// Encoder mappings (used for VIA).
+#define ENCODERS 3
+#define ENCODERS_CW_KEY  { { 22, 0 }, { 18, 0 }, { 20, 0 } }
+#define ENCODERS_CCW_KEY { { 23, 0 }, { 19, 0 }, { 21, 0 } }
+
+// clang-format on
+
+// RGB LED parameters.
+// This PCB uses a single chain of WS2812-compatible addressable RGB LEDs for
+// per-key backlight and underglow.
+#define RGB_DI_PIN F7
+#define RGBLED_NUM 27
+#define RGBLIGHT_LIMIT_VAL 150
+
+// RGB Lighting configuration.  This mode is used by the vendor firmware, and
+// can be chosen if the full RGB Matrix support is not desired for some reason.
+#ifdef RGBLIGHT_ENABLE
+#    define RGBLIGHT_HUE_STEP 8
+#    define RGBLIGHT_SAT_STEP 8
+#    define RGBLIGHT_VAL_STEP 8
+#    define RGBLIGHT_SLEEP
+#    define RGBLIGHT_EFFECT_BREATHING
+#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#    define RGBLIGHT_EFFECT_SNAKE
+#    define RGBLIGHT_EFFECT_KNIGHT
+#    define RGBLIGHT_EFFECT_CHRISTMAS
+#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#    define RGBLIGHT_EFFECT_RGB_TEST
+#    define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
+// RGB Matrix configuration.
+#ifdef RGB_MATRIX_ENABLE
+#    define DRIVER_LED_TOTAL RGBLED_NUM
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS RGBLIGHT_LIMIT_VAL
+
+#    define RGB_MATRIX_CENTER \
+        { 35, 35 }
+
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED
+
+// This option is required for the TYPING_HEATMAP and DIGITAL_RAIN effects,
+// both of which are disabled below, so the common support for those effects is
+// disabled too.
+#    undef RGB_MATRIX_FRAMEBUFFER_EFFECTS
+
+// This option is required for reactive effects; disabling this option will
+// implicitly disable all of them.
+#    define RGB_MATRIX_KEYPRESSES
+
+#    define ENABLE_RGB_MATRIX_ALPHAS_MODS
+#    define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_BREATHING
+#    define ENABLE_RGB_MATRIX_BAND_SAT
+#    define ENABLE_RGB_MATRIX_BAND_VAL
+#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#    define ENABLE_RGB_MATRIX_CYCLE_ALL
+#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#    define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#    define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#    define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+#    define ENABLE_RGB_MATRIX_DUAL_BEACON
+#    define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+#    define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#    define ENABLE_RGB_MATRIX_RAINDROPS
+#    define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#    define ENABLE_RGB_MATRIX_HUE_BREATHING
+#    define ENABLE_RGB_MATRIX_HUE_PENDULUM
+#    define ENABLE_RGB_MATRIX_HUE_WAVE
+#    define ENABLE_RGB_MATRIX_PIXEL_RAIN
+// The PIXEL_FRACTAL effect does not work properly when the matrix layout is
+// different from the physical layout; it also has problems when underglow
+// LEDs are present, or when multiple LEDs are associated with the same key.
+#    undef ENABLE_RGB_MATRIX_PIXEL_FRACTAL
+
+// Framebuffer effects; can be enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS
+// is defined.  Both of these effects currently don't work properly when the
+// key matrix does not match the physical layout, so they are disabled.
+#    undef ENABLE_RGB_MATRIX_TYPING_HEATM