Update 072 based CannonKeys boards to rely on core QMK support (#8716)

* Swap CannonKeys 072 boards over to rely on core QMK backlight support

* Rename keymap

* Rename via_tsangan back to via

50 files changed, 42 insertions, 14199 deletions

diff --git a/keyboards/cannonkeys/an_c/boards/ST_STM32F072B_DISCOVERY/board.c b/keyboards/cannonkeys/an_c/boards/ST_STM32F072B_DISCOVERY/board.c
deleted file mode 100644
index 7c09bd997c..0000000000
--- a/keyboards/cannonkeys/an_c/boards/ST_STM32F072B_DISCOVERY/board.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#include "hal.h"
-#include "stm32_gpio.h"
-
-/*===========================================================================*/
-/* Driver local definitions.                                                 */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported variables.                                                */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local variables and types.                                         */
-/*===========================================================================*/
-
-/**
- * @brief   Type of STM32 GPIO port setup.
- */
-typedef struct {
-  uint32_t              moder;
-  uint32_t              otyper;
-  uint32_t              ospeedr;
-  uint32_t              pupdr;
-  uint32_t              odr;
-  uint32_t              afrl;
-  uint32_t              afrh;
-} gpio_setup_t;
-
-/**
- * @brief   Type of STM32 GPIO initialization data.
- */
-typedef struct {
-#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
-  gpio_setup_t          PAData;
-#endif
-#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
-  gpio_setup_t          PBData;
-#endif
-#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
-  gpio_setup_t          PCData;
-#endif
-#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
-  gpio_setup_t          PDData;
-#endif
-#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
-  gpio_setup_t          PEData;
-#endif
-#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
-  gpio_setup_t          PFData;
-#endif
-#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
-  gpio_setup_t          PGData;
-#endif
-#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
-  gpio_setup_t          PHData;
-#endif
-#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
-  gpio_setup_t          PIData;
-#endif
-#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
-  gpio_setup_t          PJData;
-#endif
-#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
-  gpio_setup_t          PKData;
-#endif
-} gpio_config_t;
-
-/**
- * @brief   STM32 GPIO static initialization data.
- */
-static const gpio_config_t gpio_default_config = {
-#if STM32_HAS_GPIOA
-  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
-   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
-   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
-   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
-   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
-   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
-   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
-   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
-   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
-   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH},
-#endif
-#if STM32_HAS_GPIOJ
-  {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
-   VAL_GPIOJ_ODR,   VAL_GPIOJ_AFRL,   VAL_GPIOJ_AFRH},
-#endif
-#if STM32_HAS_GPIOK
-  {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
-   VAL_GPIOK_ODR,   VAL_GPIOK_AFRL,   VAL_GPIOK_AFRH}
-#endif
-};
-
-/*===========================================================================*/
-/* Driver local functions.                                                   */
-/*===========================================================================*/
-
-static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
-
-  gpiop->OTYPER  = config->otyper;
-  gpiop->OSPEEDR = config->ospeedr;
-  gpiop->PUPDR   = config->pupdr;
-  gpiop->ODR     = config->odr;
-  gpiop->AFRL    = config->afrl;
-  gpiop->AFRH    = config->afrh;
-  gpiop->MODER   = config->moder;
-}
-
-static void stm32_gpio_init(void) {
-
-  /* Enabling GPIO-related clocks, the mask comes from the
-     registry header file.*/
-  rccResetAHB(STM32_GPIO_EN_MASK);
-  rccEnableAHB(STM32_GPIO_EN_MASK, true);
-
-  /* Initializing all the defined GPIO ports.*/
-#if STM32_HAS_GPIOA
-  gpio_init(GPIOA, &gpio_default_config.PAData);
-#endif
-#if STM32_HAS_GPIOB
-  gpio_init(GPIOB, &gpio_default_config.PBData);
-#endif
-#if STM32_HAS_GPIOC
-  gpio_init(GPIOC, &gpio_default_config.PCData);
-#endif
-#if STM32_HAS_GPIOD
-  gpio_init(GPIOD, &gpio_default_config.PDData);
-#endif
-#if STM32_HAS_GPIOE
-  gpio_init(GPIOE, &gpio_default_config.PEData);
-#endif
-#if STM32_HAS_GPIOF
-  gpio_init(GPIOF, &gpio_default_config.PFData);
-#endif
-#if STM32_HAS_GPIOG
-  gpio_init(GPIOG, &gpio_default_config.PGData);
-#endif
-#if STM32_HAS_GPIOH
-  gpio_init(GPIOH, &gpio_default_config.PHData);
-#endif
-#if STM32_HAS_GPIOI
-  gpio_init(GPIOI, &gpio_default_config.PIData);
-#endif
-#if STM32_HAS_GPIOJ
-  gpio_init(GPIOJ, &gpio_default_config.PJData);
-#endif
-#if STM32_HAS_GPIOK
-  gpio_init(GPIOK, &gpio_default_config.PKData);
-#endif
-}
-
-/*===========================================================================*/
-/* Driver interrupt handlers.                                                */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported functions.                                                */
-/*===========================================================================*/
-
-/**
- * @brief   Early initialization code.
- * @details GPIO ports and system clocks are initialized before everything
- *          else.
- */
-void __early_init(void) {
-  extern void enter_bootloader_mode_if_requested(void);
-  enter_bootloader_mode_if_requested();
-  stm32_gpio_init();
-  stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief   SDC card detection.
- */
-bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   SDC card write protection detection.
- */
-bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief   MMC_SPI card detection.
- */
-bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   MMC_SPI card write protection detection.
- */
-bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif
-
-/**
- * @brief   Board-specific initialization code.
- * @todo    Add your board-specific code, if any.
- */
-void boardInit(void) {
-  SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP;
-  SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP);
-}
diff --git a/keyboards/cannonkeys/an_c/boards/ST_STM32F072B_DISCOVERY/board.h b/keyboards/cannonkeys/an_c/boards/ST_STM32F072B_DISCOVERY/board.h
deleted file mode 100644
index 57636d1f12..0000000000
--- a/keyboards/cannonkeys/an_c/boards/ST_STM32F072B_DISCOVERY/board.h
+++ /dev/null
@@ -1,940 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#ifndef BOARD_H
-#define BOARD_H
-
-/*===========================================================================*/
-/* Driver constants.                                                         */
-/*===========================================================================*/
-
-/*
- * Setup for ST STM32F072B-Discovery board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_ST_STM32F072B_DISCOVERY
-#define BOARD_NAME                  "ST STM32F072B-Discovery"
-
-/*
- * Board oscillators-related settings.
- * NOTE: HSE not fitted.
- */
-#if !defined(STM32_LSECLK)
-#define STM32_LSECLK                32768
-#endif
-
-#define STM32_LSEDRV                (3U << 3U)
-
-#if !defined(STM32_HSECLK)
-#define STM32_HSECLK                0U
-#endif
-
-#define STM32_HSE_BYPASS
-
-/*
- * MCU type as defined in the ST header.
- */
-#define STM32F072xB
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON                0U
-#define GPIOA_PIN1                  1U
-#define GPIOA_PIN2                  2U
-#define GPIOA_PIN3                  3U
-#define GPIOA_PIN4                  4U
-#define GPIOA_PIN5                  5U
-#define GPIOA_PIN6                  6U
-#define GPIOA_PIN7                  7U
-#define GPIOA_PIN8                  8U
-#define GPIOA_PIN9                  9U
-#define GPIOA_PIN10                 10U
-#define GPIOA_USB_DM                11U
-#define GPIOA_USB_DP                12U
-#define GPIOA_SWDIO                 13U
-#define GPIOA_SWCLK                 14U
-#define GPIOA_PIN15                 15U
-
-#define GPIOB_PIN0                  0U
-#define GPIOB_PIN1                  1U
-#define GPIOB_PIN2                  2U
-#define GPIOB_PIN3                  3U
-#define GPIOB_PIN4                  4U
-#define GPIOB_PIN5                  5U
-#define GPIOB_PIN6                  6U
-#define GPIOB_PIN7                  7U
-#define GPIOB_PIN8                  8U
-#define GPIOB_PIN9                  9U
-#define GPIOB_PIN10                 10U
-#define GPIOB_PIN11                 11U
-#define GPIOB_PIN12                 12U
-#define GPIOB_SPI2_SCK              13U
-#define GPIOB_SPI2_MISO             14U
-#define GPIOB_SPI2_MOSI             15U
-
-#define GPIOC_MEMS_CS               0U
-#define GPIOC_PIN1                  1U
-#define GPIOC_PIN2                  2U
-#define GPIOC_PIN3                  3U
-#define GPIOC_PIN4                  4U
-#define GPIOC_PIN5                  5U
-#define GPIOC_LED_RED               6U
-#define GPIOC_LED_BLUE              7U
-#define GPIOC_LED_ORANGE            8U
-#define GPIOC_LED_GREEN             9U
-#define GPIOC_PIN10                 10U
-#define GPIOC_PIN11                 11U
-#define GPIOC_PIN12                 12U
-#define GPIOC_PIN13                 13U
-#define GPIOC_OSC32_IN              14U
-#define GPIOC_OSC32_OUT             15U
-
-#define GPIOD_PIN0                  0U
-#define GPIOD_PIN1                  1U
-#define GPIOD_PIN2                  2U
-#define GPIOD_PIN3                  3U
-#define GPIOD_PIN4                  4U
-#define GPIOD_PIN5                  5U
-#define GPIOD_PIN6                  6U
-#define GPIOD_PIN7                  7U
-#define GPIOD_PIN8                  8U
-#define GPIOD_PIN9                  9U
-#define GPIOD_PIN10                 10U
-#define GPIOD_PIN11                 11U
-#define GPIOD_PIN12                 12U
-#define GPIOD_PIN13                 13U
-#define GPIOD_PIN14                 14U
-#define GPIOD_PIN15                 15U
-
-#define GPIOE_PIN0                  0U
-#define GPIOE_PIN1                  1U
-#define GPIOE_PIN2                  2U
-#define GPIOE_PIN3                  3U
-#define GPIOE_PIN4                  4U
-#define GPIOE_PIN5                  5U
-#define GPIOE_PIN6                  6U
-#define GPIOE_PIN7                  7U
-#define GPIOE_PIN8                  8U
-#define GPIOE_PIN9                  9U
-#define GPIOE_PIN10                 10U
-#define GPIOE_PIN11                 11U
-#define GPIOE_PIN12                 12U
-#define GPIOE_PIN13                 13U
-#define GPIOE_PIN14                 14U
-#define GPIOE_PIN15                 15U
-
-#define GPIOF_OSC_IN                0U
-#define GPIOF_OSC_OUT               1U
-#define GPIOF_PIN2                  2U
-#define GPIOF_PIN3                  3U
-#define GPIOF_PIN4                  4U
-#define GPIOF_PIN5                  5U
-#define GPIOF_PIN6                  6U
-#define GPIOF_PIN7                  7U
-#define GPIOF_PIN8                  8U
-#define GPIOF_PIN9                  9U
-#define GPIOF_PIN10                 10U
-#define GPIOF_PIN11                 11U
-#define GPIOF_PIN12                 12U
-#define GPIOF_PIN13                 13U
-#define GPIOF_PIN14                 14U
-#define GPIOF_PIN15                 15U
-
-/*
- * IO lines assignments.
- */
-#define LINE_BUTTON                 PAL_LINE(GPIOA, 0U)
-#define LINE_USB_DM                 PAL_LINE(GPIOA, 11U)
-#define LINE_USB_DP                 PAL_LINE(GPIOA, 12U)
-#define LINE_SWDIO                  PAL_LINE(GPIOA, 13U)
-#define LINE_SWCLK                  PAL_LINE(GPIOA, 14U)
-#define LINE_SPI2_SCK               PAL_LINE(GPIOB, 13U)
-#define LINE_SPI2_MISO              PAL_LINE(GPIOB, 14U)
-#define LINE_SPI2_MOSI              PAL_LINE(GPIOB, 15U)
-#define LINE_MEMS_CS                PAL_LINE(GPIOC, 0U)
-#define LINE_LED_RED                PAL_LINE(GPIOC, 6U)
-#define LINE_LED_BLUE               PAL_LINE(GPIOC, 7U)
-#define LINE_LED_ORANGE             PAL_LINE(GPIOC, 8U)
-#define LINE_LED_GREEN              PAL_LINE(GPIOC, 9U)
-#define LINE_OSC32_IN               PAL_LINE(GPIOC, 14U)
-#define LINE_OSC32_OUT              PAL_LINE(GPIOC, 15U)
-#define LINE_OSC_IN                 PAL_LINE(GPIOF, 0U)
-#define LINE_OSC_OUT                PAL_LINE(GPIOF, 1U)
-
-/*===========================================================================*/
-/* Driver pre-compile time settings.                                         */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Derived constants and error checks.                                       */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver data structures and types.                                         */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver macros.                                                            */
-/*===========================================================================*/
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n)           (0U << ((n) * 2U))
-#define PIN_MODE_OUTPUT(n)          (1U << ((n) * 2U))
-#define PIN_MODE_ALTERNATE(n)       (2U << ((n) * 2U))
-#define PIN_MODE_ANALOG(n)          (3U << ((n) * 2U))
-#define PIN_ODR_LOW(n)              (0U << (n))
-#define PIN_ODR_HIGH(n)             (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n)       (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n)      (1U << (n))
-#define PIN_OSPEED_VERYLOW(n)       (0U << ((n) * 2U))
-#define PIN_OSPEED_LOW(n)           (1U << ((n) * 2U))
-#define PIN_OSPEED_MEDIUM(n)        (2U << ((n) * 2U))
-#define PIN_OSPEED_HIGH(n)          (3U << ((n) * 2U))
-#define PIN_PUPDR_FLOATING(n)       (0U << ((n) * 2U))
-#define PIN_PUPDR_PULLUP(n)         (1U << ((n) * 2U))
-#define PIN_PUPDR_PULLDOWN(n)       (2U << ((n) * 2U))
-#define PIN_AFIO_AF(n, v)           ((v) << (((n) % 8U) * 4U))
-
-/*
- * GPIOA setup:
- *
- * PA0  - BUTTON                    (input floating).
- * PA1  - PIN1                      (input pullup).
- * PA2  - PIN2                      (input pullup).
- * PA3  - PIN3                      (input pullup).
- * PA4  - PIN4                      (input pullup).
- * PA5  - PIN5                      (input pullup).
- * PA6  - PIN6                      (input pullup).
- * PA7  - PIN7                      (input pullup).
- * PA8  - PIN8                      (input pullup).
- * PA9  - PIN9                      (input pullup).
- * PA10 - PIN10                     (input pullup).
- * PA11 - USB_DM                    (input floating).
- * PA12 - USB_DP                    (input floating).
- * PA13 - SWDIO                     (alternate 0).
- * PA14 - SWCLK                     (alternate 0).
- * PA15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOA_MODER             (PIN_MODE_INPUT(GPIOA_BUTTON) |         \
-                                     PIN_MODE_INPUT(GPIOA_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOA_USB_DM) |         \
-                                     PIN_MODE_INPUT(GPIOA_USB_DP) |         \
-                                     PIN_MODE_ALTERNATE(GPIOA_SWDIO) |      \
-                                     PIN_MODE_ALTERNATE(GPIOA_SWCLK) |      \
-                                     PIN_MODE_INPUT(GPIOA_PIN15))
-#define VAL_GPIOA_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
-#define VAL_GPIOA_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DM) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DP) |     \
-                                     PIN_OSPEED_HIGH(GPIOA_SWDIO) |         \
-                                     PIN_OSPEED_HIGH(GPIOA_SWCLK) |         \
-                                     PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR