merge upstream master

4 files changed, 8 insertions, 10 deletions

diff --git a/keyboards/ydkb/just60/config.h b/keyboards/ydkb/just60/config.h
index 82272ffffa..16b205105d 100644
--- a/keyboards/ydkb/just60/config.h
+++ b/keyboards/ydkb/just60/config.h
@@ -19,20 +19,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x1960
-#define DEVICE_VER 0x0001
-#define MANUFACTURER YDKB
-#define PRODUCT Just60
-
 /* key matrix size */
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 14
 
 #define MATRIX_ROW_PINS { E2, C7, B3, B2, B1 }
 #define MATRIX_COL_PINS { D6, D7, B4, B6, B5, B7, F7, F6, F5, F4, F1, F0, E6, B0 }
-#define UNUSED_PINS
 #define DIODE_DIRECTION COL2ROW
 
 #define QMK_ESC_OUTPUT D6 // usually COL
diff --git a/keyboards/ydkb/just60/info.json b/keyboards/ydkb/just60/info.json
index 5f42033845..8d297d51ad 100644
--- a/keyboards/ydkb/just60/info.json
+++ b/keyboards/ydkb/just60/info.json
@@ -1,7 +1,13 @@
 {
     "keyboard_name": "Just60",
+    "manufacturer": "YDKB",
     "url": "",
     "maintainer": "thinxer",
+    "usb": {
+        "vid": "0xFEED",
+        "pid": "0x1960",
+        "device_version": "0.0.1"
+    },
     "layouts": {
         "LAYOUT": {
             "layout": [
diff --git a/keyboards/ydkb/just60/keymaps/thinxer/keymap.c b/keyboards/ydkb/just60/keymaps/thinxer/keymap.c
index da034e0e44..b23cb57ce9 100644
--- a/keyboards/ydkb/just60/keymaps/thinxer/keymap.c
+++ b/keyboards/ydkb/just60/keymaps/thinxer/keymap.c
@@ -41,7 +41,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         _______, _______, _______, _______,          _______,          _______, _______,          KC_HOME, KC_PGDN, KC_PGUP,  KC_END
      ),
     [_COMMAND] = LAYOUT(
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, EEP_RST,   RESET,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, EEP_RST,   QK_BOOT,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
diff --git a/keyboards/ydkb/just60/readme.md b/keyboards/ydkb/just60/readme.md
index 1fe05bd3ea..76eee5dced 100644
--- a/keyboards/ydkb/just60/readme.md
+++ b/keyboards/ydkb/just60/readme.md
@@ -2,7 +2,7 @@
 
 Just60 keyboard produced by Yang. The keyboard comes with a custom Mass Storage Device bootloader and a TMK based firmware from ydkb.io.
 
-To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are `VCC`, `SCLK`, `MOSI`, `MISO`, `RESET`, `GND`. The `GND` is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with `avrdude`.
+To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are `VCC`, `SCLK`, `MOSI`, `MISO`, `QK_BOOT`, `GND`. The `GND` is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with `avrdude`.
 
 Backlight LEDs and Bluetooth are not working yet.