Remove non-Keychron keyboards

9 files changed, 0 insertions, 322 deletions

diff --git a/keyboards/wilba_tech/wt75_c/config.h b/keyboards/wilba_tech/wt75_c/config.h
deleted file mode 100644
index 8562e8e18a..0000000000
--- a/keyboards/wilba_tech/wt75_c/config.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 16
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, B7, D4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
-// enable the mono backlight
-#define MONO_BACKLIGHT_ENABLED 1
-
-// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
-#define MONO_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
-
-// disable backlight after timeout in minutes, 0 = no timeout
-#define MONO_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
-
-// the default brightness
-#define MONO_BACKLIGHT_BRIGHTNESS 255
-
-// the default effect
-#define MONO_BACKLIGHT_EFFECT 1
-
-// the default effect speed (0-3)
-#define MONO_BACKLIGHT_EFFECT_SPEED 000
-
-// Backlight config starts after VIA's EEPROM usage,
-// dynamic keymaps start after this.
-#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 7
-
-// VIA lighting is handled by the keyboard-level code
-#define VIA_CUSTOM_LIGHTING_ENABLE
diff --git a/keyboards/wilba_tech/wt75_c/info.json b/keyboards/wilba_tech/wt75_c/info.json
deleted file mode 100644
index c124bd0d99..0000000000
--- a/keyboards/wilba_tech/wt75_c/info.json
+++ /dev/null
@@ -1,16 +0,0 @@
-{
-    "keyboard_name": "WT75-C", 
-    "manufacturer": "wilba.tech",
-    "url": "https://wilba.tech", 
-    "maintainer": "Wilba", 
-    "usb": {
-        "vid": "0x6582",
-        "pid": "0x075C",
-        "device_version": "0.0.1"
-    },
-    "layouts": {
-        "LAYOUT_all": {
-            "layout": [{"label":"0", "x":0, "y":0}, {"label":"1", "x":1.25, "y":0}, {"label":"2", "x":2.25, "y":0}, {"label":"3", "x":3.25, "y":0}, {"label":"4", "x":4.25, "y":0}, {"label":"5", "x":5.5, "y":0}, {"label":"6", "x":6.5, "y":0}, {"label":"7", "x":7.5, "y":0}, {"label":"8", "x":8.5, "y":0}, {"label":"9", "x":9.75, "y":0}, {"label":"10", "x":10.75, "y":0}, {"label":"11", "x":11.75, "y":0}, {"label":"12", "x":12.75, "y":0}, {"label":"13", "x":14, "y":0}, {"label":"14", "x":0, "y":1.25}, {"label":"15", "x":1, "y":1.25}, {"label":"16", "x":2, "y":1.25}, {"label":"17", "x":3, "y":1.25}, {"label":"18", "x":4, "y":1.25}, {"label":"19", "x":5, "y":1.25}, {"label":"20", "x":6, "y":1.25}, {"label":"21", "x":7, "y":1.25}, {"label":"22", "x":8, "y":1.25}, {"label":"23", "x":9, "y":1.25}, {"label":"24", "x":10, "y":1.25}, {"label":"25", "x":11, "y":1.25}, {"label":"26", "x":12, "y":1.25}, {"label":"27", "x":13, "y":1.25}, {"label":"28", "x":14, "y":1.25}, {"label":"29", "x":15.25, "y":1.25}, {"label":"30", "x":0, "y":2.25, "w":1.5}, {"label":"31", "x":1.5, "y":2.25}, {"label":"32", "x":2.5, "y":2.25}, {"label":"33", "x":3.5, "y":2.25}, {"label":"34", "x":4.5, "y":2.25}, {"label":"35", "x":5.5, "y":2.25}, {"label":"36", "x":6.5, "y":2.25}, {"label":"37", "x":7.5, "y":2.25}, {"label":"38", "x":8.5, "y":2.25}, {"label":"39", "x":9.5, "y":2.25}, {"label":"40", "x":10.5, "y":2.25}, {"label":"41", "x":11.5, "y":2.25}, {"label":"42", "x":12.5, "y":2.25}, {"label":"43", "x":13.5, "y":2.25, "w":1.5}, {"label":"44", "x":15.25, "y":2.25}, {"label":"45", "x":0, "y":3.25, "w":1.75}, {"label":"46", "x":1.75, "y":3.25}, {"label":"47", "x":2.75, "y":3.25}, {"label":"48", "x":3.75, "y":3.25}, {"label":"49", "x":4.75, "y":3.25}, {"label":"50", "x":5.75, "y":3.25}, {"label":"51", "x":6.75, "y":3.25}, {"label":"52", "x":7.75, "y":3.25}, {"label":"53", "x":8.75, "y":3.25}, {"label":"54", "x":9.75, "y":3.25}, {"label":"55", "x":10.75, "y":3.25}, {"label":"56", "x":11.75, "y":3.25}, {"label":"57", "x":12.75, "y":3.25, "w":2.25}, {"label":"58", "x":15.25, "y":3.25}, {"label":"59", "x":0, "y":4.25, "w":2.25}, {"label":"60", "x":2.25, "y":4.25}, {"label":"61", "x":3.25, "y":4.25}, {"label":"62", "x":4.25, "y":4.25}, {"label":"63", "x":5.25, "y":4.25}, {"label":"64", "x":6.25, "y":4.25}, {"label":"65", "x":7.25, "y":4.25}, {"label":"66", "x":8.25, "y":4.25}, {"label":"67", "x":9.25, "y":4.25}, {"label":"68", "x":10.25, "y":4.25}, {"label":"69", "x":11.25, "y":4.25}, {"label":"70", "x":12.25, "y":4.25, "w":1.75}, {"label":"71", "x":14.25, "y":4.5}, {"label":"72", "x":0, "y":5.25, "w":1.5}, {"label":"73", "x":1.5, "y":5.25}, {"label":"74", "x":2.5, "y":5.25, "w":1.5}, {"label":"75", "x":4, "y":5.25, "w":6}, {"label":"76", "x":10, "y":5.25, "w":1.5}, {"label":"77", "x":11.5, "y":5.25, "w":1.5}, {"label":"78", "x":13.25, "y":5.5}, {"label":"79", "x":14.25, "y":5.5}, {"label":"80", "x":15.25, "y":5.5}]
-        }
-    }
-}
diff --git a/keyboards/wilba_tech/wt75_c/keymaps/default/keymap.c b/keyboards/wilba_tech/wt75_c/keymaps/default/keymap.c
deleted file mode 100644
index 0eedd4cb10..0000000000
--- a/keyboards/wilba_tech/wt75_c/keymaps/default/keymap.c
+++ /dev/null
@@ -1,41 +0,0 @@
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-	// Default layer
-	[0] = LAYOUT_all(
-		KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR,
-		KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_DEL,
-		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_PGUP,
-		KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_PGDN,
-		KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                   KC_UP,
-		KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),            KC_LEFT, KC_DOWN, KC_RGHT),
-
-	// Fn1 Layer
-	[1] = LAYOUT_all(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
-
-	// Fn2 Layer
-	[2] = LAYOUT_all(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
-
-	// Fn3 Layer
-	[3] = LAYOUT_all(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
-};
-
diff --git a/keyboards/wilba_tech/wt75_c/keymaps/via/keymap.c b/keyboards/wilba_tech/wt75_c/keymaps/via/keymap.c
deleted file mode 100644
index 0eedd4cb10..0000000000
--- a/keyboards/wilba_tech/wt75_c/keymaps/via/keymap.c
+++ /dev/null
@@ -1,41 +0,0 @@
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-	// Default layer
-	[0] = LAYOUT_all(
-		KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR,
-		KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_DEL,
-		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_PGUP,
-		KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_PGDN,
-		KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                   KC_UP,
-		KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),            KC_LEFT, KC_DOWN, KC_RGHT),
-
-	// Fn1 Layer
-	[1] = LAYOUT_all(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
-
-	// Fn2 Layer
-	[2] = LAYOUT_all(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
-
-	// Fn3 Layer
-	[3] = LAYOUT_all(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS),
-};
-
diff --git a/keyboards/wilba_tech/wt75_c/keymaps/via/rules.mk b/keyboards/wilba_tech/wt75_c/keymaps/via/rules.mk
deleted file mode 100644
index 1e5b99807c..0000000000
--- a/keyboards/wilba_tech/wt75_c/keymaps/via/rules.mk
+++ /dev/null
@@ -1 +0,0 @@
-VIA_ENABLE = yes
diff --git a/keyboards/wilba_tech/wt75_c/readme.md b/keyboards/wilba_tech/wt75_c/readme.md
deleted file mode 100644
index 7bcef19003..0000000000
--- a/keyboards/wilba_tech/wt75_c/readme.md
+++ /dev/null
@@ -1,13 +0,0 @@
-# wilba.tech WT75-C
-
-WT75-C is a keyboard PCB supporting 75% layout with offset arrow keys. [More info at wilba.tech](https://wilba.tech/)
-
-Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)  
-Hardware Supported: wilba.tech WT75-C  
-Hardware Availability: Custom keyboard group buys
-
-Make example for this keyboard (after setting up your build environment):
-
-    make wilba_tech/wt75_c:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
diff --git a/keyboards/wilba_tech/wt75_c/rules.mk b/keyboards/wilba_tech/wt75_c/rules.mk
deleted file mode 100644
index 20309ed79e..0000000000
--- a/keyboards/wilba_tech/wt75_c/rules.mk
+++ /dev/null
@@ -1,24 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no        # Console for debug
-COMMAND_ENABLE = no        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-AUDIO_ENABLE = no           # Audio output
-
-# project specific files
-SRC =	drivers/led/issi/is31fl3736.c \
-		i2c_master.c \
-		quantum/color.c \
-		keyboards/wilba_tech/wt_mono_backlight.c \
-		keyboards/wilba_tech/wt_main.c
diff --git a/keyboards/wilba_tech/wt75_c/wt75_c.c b/keyboards/wilba_tech/wt75_c/wt75_c.c
deleted file mode 100644
index ccff6d62c9..0000000000
--- a/keyboards/wilba_tech/wt75_c/wt75_c.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-// Nothing to see here, move along... ;-)
diff --git a/keyboards/wilba_tech/wt75_c/wt75_c.h b/keyboards/wilba_tech/wt75_c/wt75_c.h
deleted file mode 100644
index 4c74bb117c..0000000000
--- a/keyboards/wilba_tech/wt75_c/wt75_c.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* Copyright 2018 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "quantum.h"
-
-#define ____ KC_NO
-
-// Right switch of split backspace is at 2,13 and is the only switch
-// whose physical position doesn't match switch matrix position :-(
-// However, it also makes no sense to view the physical as 16 columns,
-// so the numbering goes 00 to 14. Deal with it.
-//
-// 0,15 exists on PCB but is blocked by the 7V blocker so until someone
-// designs a case that uses it, we can just forget it exists.
-
-#define LAYOUT_all( \
-    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K014,       \
-    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \
-    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       K215, \
-    K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,             K315, \
-    K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412,             K413,       \
-    K500, K501, K502,                   K506,                   K510, K511,       K512, K513, K515  \
-) { \
-    { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, ____, K014, ____ }, \
-    { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \
-    { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \
-    { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, ____, ____, K315 }, \
-    { K400, ____, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, ____, ____ }, \
-    { K500, K501, K502, ____, ____, ____, K506, ____, ____, ____, K510, K511, K512, K513, ____, K515 }  \
-}
-