Remove non-Keychron keyboards

9 files changed, 0 insertions, 288 deletions

diff --git a/keyboards/wilba_tech/rama_works_kara/config.h b/keyboards/wilba_tech/rama_works_kara/config.h
deleted file mode 100644
index 3ce58330ed..0000000000
--- a/keyboards/wilba_tech/rama_works_kara/config.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/* Copyright 2021 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#include "config_common.h"
-
-// key matrix size
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
-
-// M60-A PCB default pin-out
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
-
-// IS31FL3731 driver
-#define DRIVER_COUNT 2
-#define DRIVER_LED_TOTAL 72
-
-// COL2ROW or ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
-// Set 0 if debouncing isn't needed
-#define DEBOUNCE 5
-
-// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
-#define LOCKING_SUPPORT_ENABLE
-// Locking resynchronize hack
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-// disable debug print
-//#define NO_DEBUG
-
-// disable print
-//#define NO_PRINT
-
-// disable action features
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
-#define RGB_BACKLIGHT_ENABLED 1
-
-// This conditionally compiles the backlight code for M60-A specifics
-#define RGB_BACKLIGHT_M60_A
-
-// enable/disable LEDs based on layout
-// they aren't really used if RGB_BACKLIGHT_M60_A defined
-#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1
-#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
-#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1
-#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1
-#define RGB_BACKLIGHT_USE_ISO_ENTER 0
-#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 1
-
-// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
-#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
-
-// disable backlight after timeout in minutes, 0 = no timeout
-#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
-
-// the default brightness
-#define RGB_BACKLIGHT_BRIGHTNESS 255
-
-// the default effect (RGB test)
-#define RGB_BACKLIGHT_EFFECT 255
-
-// the default effect speed (0-3)
-#define RGB_BACKLIGHT_EFFECT_SPEED 0
-
-// the default color1 and color2
-#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
-#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
-
-// These define which keys in the matrix are alphas/mods
-// Used for backlight effects so colors are different for
-// alphas vs. mods
-// Each value is for a row, bit 0 is column 0
-// Alpha=0 Mod=1
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0010000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011100000000111
-
-#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
-
-// Backlight config starts after VIA's EEPROM usage,
-// dynamic keymaps start after this.
-#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
-
-// VIA lighting is handled by the keyboard-level code
-#define VIA_CUSTOM_LIGHTING_ENABLE
diff --git a/keyboards/wilba_tech/rama_works_kara/info.json b/keyboards/wilba_tech/rama_works_kara/info.json
deleted file mode 100644
index 2be81f0866..0000000000
--- a/keyboards/wilba_tech/rama_works_kara/info.json
+++ /dev/null
@@ -1,16 +0,0 @@
-{
-    "keyboard_name": "KARA", 
-    "manufacturer": "RAMA WORKS",
-    "url": "http://rama.works", 
-    "maintainer": "Wilba", 
-    "usb": {
-        "vid": "0x5241",
-        "pid": "0x4B52",
-        "device_version": "0.0.1"
-    },
-    "layouts": {
-        "LAYOUT_60_hhkb": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}]
-        }
-    }
-}
diff --git a/keyboards/wilba_tech/rama_works_kara/keymaps/default/keymap.c b/keyboards/wilba_tech/rama_works_kara/keymaps/default/keymap.c
deleted file mode 100644
index 15f654de0c..0000000000
--- a/keyboards/wilba_tech/rama_works_kara/keymaps/default/keymap.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/* Copyright 2021 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-// Default layout for RAMA WORKS KARA
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-	// Default layer
-	[0] = LAYOUT_60_hhkb(
-		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,
-		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
-		KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
-		KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, FN_MO13,
-				KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, FN_MO23),
-
-	// Fn1 Layer
-	[1] = LAYOUT_60_hhkb(
-		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL,
-		KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
-				KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS),
-
-	// Fn2 Layer
-	[2] = LAYOUT_60_hhkb(
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-				KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS),
-
-	// Fn3 Layer
-	[3] = LAYOUT_60_hhkb(
-		KC_TRNS, EF_DEC,  EF_INC,  H1_DEC,  H1_INC,  H2_DEC,  H2_INC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC,  BR_INC,  KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC,  S1_INC,  S2_DEC,  S2_INC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC,  ES_INC,  KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-				KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS),
-
-};
-
-
diff --git a/keyboards/wilba_tech/rama_works_kara/keymaps/via/keymap.c b/keyboards/wilba_tech/rama_works_kara/keymaps/via/keymap.c
deleted file mode 100644
index 1f9d213f05..0000000000
--- a/keyboards/wilba_tech/rama_works_kara/keymaps/via/keymap.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../default/keymap.c"
\ No newline at end of file
diff --git a/keyboards/wilba_tech/rama_works_kara/keymaps/via/rules.mk b/keyboards/wilba_tech/rama_works_kara/keymaps/via/rules.mk
deleted file mode 100644
index 1e5b99807c..0000000000
--- a/keyboards/wilba_tech/rama_works_kara/keymaps/via/rules.mk
+++ /dev/null
@@ -1 +0,0 @@
-VIA_ENABLE = yes
diff --git a/keyboards/wilba_tech/rama_works_kara/rama_works_kara.c b/keyboards/wilba_tech/rama_works_kara/rama_works_kara.c
deleted file mode 100644
index 787a854925..0000000000
--- a/keyboards/wilba_tech/rama_works_kara/rama_works_kara.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/* Copyright 2021 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef RGB_BACKLIGHT_M60_A
-#error RGB_BACKLIGHT_M60_A not defined
-#endif
diff --git a/keyboards/wilba_tech/rama_works_kara/rama_works_kara.h b/keyboards/wilba_tech/rama_works_kara/rama_works_kara.h
deleted file mode 100644
index c3e06f8521..0000000000
--- a/keyboards/wilba_tech/rama_works_kara/rama_works_kara.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* Copyright 2021 Jason Williams (Wilba)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#include "quantum.h"
-#include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
-#include "via.h"
-
-#define XXX KC_NO
-
-#define LAYOUT_60_hhkb( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,      \
-    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
-         K41, K42,                     K47,                K4B, K4C       \
-) { \
-    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
-    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
-    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
-    { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
-    { XXX, K41, K42, XXX, XXX, XXX, XXX, K47, XXX, XXX, XXX, K4B, K4C, XXX }  \
-}
-
diff --git a/keyboards/wilba_tech/rama_works_kara/readme.md b/keyboards/wilba_tech/rama_works_kara/readme.md
deleted file mode 100644
index 967cfd5e7f..0000000000
--- a/keyboards/wilba_tech/rama_works_kara/readme.md
+++ /dev/null
@@ -1,13 +0,0 @@
-# RAMA WORKS KARA
-
-KARA is a keyboard PCB supporting HHKB layout and daughterboard USB-C. [More info at RAMA WORKS](https://rama.works/kara/)
-
-* Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
-* Hardware Supported: RAMA WORKS KARA PCB
-* Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make wilba_tech/rama_works_kara:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/wilba_tech/rama_works_kara/rules.mk b/keyboards/wilba_tech/rama_works_kara/rules.mk
deleted file mode 100644
index a3731bf69c..0000000000
--- a/keyboards/wilba_tech/rama_works_kara/rules.mk
+++ /dev/null
@@ -1,34 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
-# Do not put the microcontroller into power saving mode
-# when we get USB suspend event. We want it to keep updating
-# backlight effects.
-OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = yes           # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-
-CIE1931_CURVE = yes
-
-LAYOUTS = 60_hhkb
-
-# project specific files
-SRC =	keyboards/wilba_tech/wt_main.c \
-		keyboards/wilba_tech/wt_rgb_backlight.c \
-		quantum/color.c \
-		drivers/led/issi/is31fl3731.c \
-		i2c_master.c