UT47 layout (#2791)

* Add new project files for UT47

* Copy over keymap and related files

* Add LED_controls.ino

* Add README instructions

* Attempt sending press byte data

* Disable mousekeys

* Enable sending serial data to LED controller

* Update LED mode names

* Remove extra file

* Add LED enable flag

* Update READMEs with more info

* Credit original author

* Update copyrights

* Update docs

* Changed based on review

* Move layout screenshot to Imgur

* Append to src

* Enable mousekeys to fix bad keycodes

* Additional changes based on feedback

* Fix fn layer keys

11 files changed, 1095 insertions, 0 deletions

diff --git a/keyboards/ut47/LED_controls.ino b/keyboards/ut47/LED_controls.ino
new file mode 100644
index 0000000000..dd50300eb7
--- /dev/null
+++ b/keyboards/ut47/LED_controls.ino
@@ -0,0 +1,420 @@
+#include <FastGPIO.h>
+#include <TimerOne.h>
+
+int iByte;
+byte col = 0;
+byte leds[12][4];
+byte pass = 1;
+int fadecount = 1;
+const int fadelimit = 3000;
+const int fadelimitshort = 1000;
+byte mode = 4;
+byte brightness = 2;
+boolean changemode = 0;
+int rain = 0;
+const int rainlimit = 5000;
+const int rainfade = 5000;
+byte rx = 0;
+byte ry = 0;
+
+// pin[xx] on led matrix connected to nn on Arduino (-1 is dummy to make array start at pos 1)
+int pins[17] = {
+  -1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 16, 14, 15, 18, 19, 20, 21
+};
+
+// col[xx] of leds = pin yy on led matrix
+int cols[12] = {
+  pins[8], pins[7], pins[6], pins[5], pins[9], pins[10], pins[11], pins[12], pins[13], pins[14], pins[15], pins[16]
+};
+
+// row[xx] of leds = pin yy on led matrix
+int rows[4] = {
+  pins[1], pins[2], pins[3], pins[4]
+};
+
+
+#define DELAY 0
+extern byte leds[12][4];
+
+void setup() {
+  Serial1.begin(9600);
+  setupLeds();
+  for (int s = 0; s < 5; s++) {
+    for ( int r = 1; r  < 9; r++)  {
+      delayMicroseconds(65000);
+      delayMicroseconds(65000);
+      for (int j = 0; j < 4; j++) {
+        for (int i = 0; i < 12; i++) {
+          leds[i][j] = 1;
+          for (int p = 0; p < 25; p++) {
+          }
+          leds[i][j] = r;
+        }
+      }
+    }
+    for ( int r = 9; r  > 0; r--)  {
+      delayMicroseconds(65000);
+      delayMicroseconds(65000);
+      delayMicroseconds(65000);
+      for (int j = 0; j < 4; j++) {
+        for (int i = 0; i < 12; i++) {
+          leds[i][j] = 1;
+          for (int p = 0; p < 25; p++) {
+          }
+          leds[i][j] = r;
+        }
+      }
+    }
+  }
+}
+
+void loop() {
+
+  switch (mode) {
+    case 0:
+      //Blacklight
+      for (int i = 0; i < 12; i++) {
+        for (int j = 0; j < 4; j++) {
+          leds[i][j] = brightness;
+        }
+      }
+      checkserial();
+      break;
+    case 1:
+      //Breathing
+      for ( int r = 1; r  < 9; r++)  {
+        checkserial();
+        if (changemode == 0) {
+          delayMicroseconds(65000);
+          delayMicroseconds(65000);
+          delayMicroseconds(65000);
+          for (int j = 0; j < 4; j++) {
+            for (int i = 0; i < 12; i++) {
+              leds[i][j] = 1;
+              for (int p = 0; p < 25; p++) {
+              }
+              leds[i][j] = r;
+            }
+          }
+        }
+        else {
+          break;
+        }
+      }
+      for ( int r = 9; r  > 0; r--)  {
+        checkserial();
+        if (changemode == 0) {
+          delayMicroseconds(65000);
+          delayMicroseconds(65000);
+          delayMicroseconds(65000);
+          delayMicroseconds(65000);
+          for (int j = 0; j < 4; j++) {
+            for (int i = 0; i < 12; i++) {
+              leds[i][j] = 1;
+              for (int p = 0; p < 25; p++) {
+              }
+              leds[i][j] = r;
+            }
+          }
+        }
+        else {
+          break;
+        }
+      }
+      for ( int r = 1; r  < 30; r++)  {
+        checkserial();
+        if (changemode == 0) {
+          delayMicroseconds(65000);
+          delayMicroseconds(65000);
+        }
+        else {
+          break;
+        }
+      }
+      break;
+    case 2:
+      //Random
+      leds[random(12)][random(4)] = random(8);
+      delayMicroseconds(10000);
+      checkserial();
+      break;
+    case 3:
+      //Rain
+      rain++;
+      if (rain > rainlimit) {
+        rain = 0;
+        rx = random(12);
+        ry = random(4);
+        if (leds[rx][ry] == 0) {
+          leds[rx][ry] = 18;
+        }
+      }
+      fadecount++;
+      if (fadecount > rainfade) {
+        fadecount = 1;
+        for (int i = 0; i < 12; i++) {
+          for (int j = 0; j < 4; j++) {
+            if (leds[i][j] > 0) {
+              leds[i][j] = leds[i][j] - 1;
+            }
+          }
+        }
+      }
+      checkserial();
+      break;
+    case 4:
+      //Reactive
+      fadecount++;
+      if (fadecount > fadelimit) {
+        fadecount = 1;
+        for (int i = 0; i < 12; i++) {
+          for (int j = 0; j < 4; j++) {
+            if (leds[i][j] > 0) {
+              leds[i][j] = leds[i][j] - 1;
+            }
+          }
+        }
+      }
+      checkserial();
+      break;
+    case 5:
+      //Reactive Target
+      fadecount++;
+      if (fadecount > fadelimitshort) {
+        fadecount = 1;
+        for (int i = 0; i < 12; i++) {
+          for (int j = 0; j < 4; j++) {
+            if (leds[i][j] > 0) {
+              leds[i][j] = leds[i][j] - 1;
+            }
+          }
+        }
+      }
+      checkserial();
+      break;
+    default:
+      mode = 0;
+      break;
+  }
+  changemode = 0;
+}
+
+void checkserial() {
+  if (Serial1.available() > 0) {
+    iByte = Serial1.read();
+    if (iByte == 100) {
+      brightness++;
+      if (brightness > 9) {
+        brightness = 1;
+      }
+    }
+    if (iByte == 101) {
+      mode++;
+    }
+    if (iByte < 100) {
+      if (mode == 4) {
+        byte row = iByte / 16;
+        byte col = iByte % 16;
+        leds[col][row] = 18;
+      }
+      if (mode == 5) {
+        byte row = iByte / 16;
+        byte col = iByte % 16;
+        for (byte i = 0; i < 12;  i++) {
+          leds[i][row] = 18;
+        }
+        for (byte p = 0; p < 4;  p++) {
+          leds[col][p] = 18;
+        }
+      }
+    }
+  }
+}
+
+void setupLeds() {
+  // sets the pins as output
+  FastGPIO::Pin<2>::setOutputLow();
+  FastGPIO::Pin<3>::setOutputLow();
+  FastGPIO::Pin<4>::setOutputLow();
+  FastGPIO::Pin<5>::setOutputLow();
+  FastGPIO::Pin<6>::setOutputLow();
+  FastGPIO::Pin<7>::setOutputLow();
+  FastGPIO::Pin<8>::setOutputLow();
+  FastGPIO::Pin<9>::setOutputLow();
+  FastGPIO::Pin<10>::setOutputLow();
+  FastGPIO::Pin<16>::setOutputLow();
+  FastGPIO::Pin<14>::setOutputLow();
+  FastGPIO::Pin<15>::setOutputLow();
+  FastGPIO::Pin<18>::setOutputLow();
+  FastGPIO::Pin<19>::setOutputLow();
+  FastGPIO::Pin<20>::setOutputLow();
+  FastGPIO::Pin<21>::setOutputLow();
+
+  // set up Cols
+  FastGPIO::Pin<6>::setOutputValueLow();
+  FastGPIO::Pin<7>::setOutputValueLow();
+  FastGPIO::Pin<8>::setOutputValueLow();
+  FastGPIO::Pin<9>::setOutputValueLow();
+  FastGPIO::Pin<10>::setOutputValueLow();
+  FastGPIO::Pin<16>::setOutputValueLow();
+  FastGPIO::Pin<14>::setOutputValueLow();
+  FastGPIO::Pin<15>::setOutputValueLow();
+  FastGPIO::Pin<18>::setOutputValueLow();
+  FastGPIO::Pin<19>::setOutputValueLow();
+  FastGPIO::Pin<20>::setOutputValueLow();
+  FastGPIO::Pin<21>::setOutputValueLow();
+
+  // set up Rows
+  FastGPIO::Pin<2>::setOutputValueLow();
+  FastGPIO::Pin<3>::setOutputValueLow();
+  FastGPIO::Pin<4>::setOutputValueLow();
+  FastGPIO::Pin<5>::setOutputValueLow();
+
+  clearLeds();
+  Timer1.initialize(25);
+  Timer1.attachInterrupt(display);
+
+}
+
+void clearLeds() {
+  // Clear display array
+  for (int i = 0; i < 12; i++) {
+    for (int j = 0; j < 4; j++) {
+      leds[i][j] = 0;
+    }
+  }
+}
+
+void onLeds() {
+  // Clear display array
+  for (int i = 0; i < 12; i++) {
+    for (int j = 0; j < 4; j++) {
+      leds[i][j] = 7;
+    }
+  }
+}
+
+// Interrupt routine
+void display() {
+
+  switch (col) { // Turn whole previous column off
+    case 0:
+      FastGPIO::Pin<6>::setOutputValueLow();
+      break;
+    case 1:
+      FastGPIO::Pin<7>::setOutputValueLow();
+      break;
+    case 2:
+      FastGPIO::Pin<8>::setOutputValueLow();
+      break;
+    case 3:
+      FastGPIO::Pin<9>::setOutputValueLow();
+      break;
+    case 4:
+      FastGPIO::Pin<10>::setOutputValueLow();
+      break;
+    case 5:
+      FastGPIO::Pin<16>::setOutputValueLow();
+      break;
+    case 6:
+      FastGPIO::Pin<14>::setOutputValueLow();
+      break;
+    case 7:
+      FastGPIO::Pin<15>::setOutputValueLow();
+      break;
+    case 8:
+      FastGPIO::Pin<18>::setOutputValueLow();
+      break;
+    case 9:
+      FastGPIO::Pin<19>::setOutputValueLow();
+      break;
+    case 10:
+      FastGPIO::Pin<20>::setOutputValueLow();
+      break;
+    case 11:
+      FastGPIO::Pin<21>::setOutputValueLow();
+      break;
+  }
+
+  col++;
+  if (col == 12) {
+    col = 0;
+    pass++;
+    if (pass > 8) {
+      pass = 1;
+    }
+  }
+  for (int row = 0; row < 4; row++) {
+    if (leds[col][row] > pass) {
+      switch (row) { // Turn on this led
+        case 0:
+          FastGPIO::Pin<2>::setOutputValueLow();
+          break;
+        case 1:
+          FastGPIO::Pin<3>::setOutputValueLow();
+          break;
+        case 2:
+          FastGPIO::Pin<4>::setOutputValueLow();
+          break;
+        case 3:
+          FastGPIO::Pin<5>::setOutputValueLow();
+          break;
+      }
+    }
+    else {
+      switch (row) { // Turn off this led
+        case 0:
+          FastGPIO::Pin<2>::setOutputValueHigh();
+          break;
+        case 1:
+          FastGPIO::Pin<3>::setOutputValueHigh();
+          break;
+        case 2:
+          FastGPIO::Pin<4>::setOutputValueHigh();
+          break;
+        case 3:
+          FastGPIO::Pin<5>::setOutputValueHigh();
+          break;
+      }
+    }
+  }
+  switch (col) { // Turn column on
+    case 0:
+      FastGPIO::Pin<6>::setOutputValueHigh();
+      break;
+    case 1:
+      FastGPIO::Pin<7>::setOutputValueHigh();
+      break;
+    case 2:
+      FastGPIO::Pin<8>::setOutputValueHigh();
+      break;
+    case 3:
+      FastGPIO::Pin<9>::setOutputValueHigh();
+      break;
+    case 4:
+      FastGPIO::Pin<10>::setOutputValueHigh();
+      break;
+    case 5:
+      FastGPIO::Pin<16>::setOutputValueHigh();
+      break;
+    case 6:
+      FastGPIO::Pin<14>::setOutputValueHigh();
+      break;
+    case 7:
+      FastGPIO::Pin<15>::setOutputValueHigh();
+      break;
+    case 8:
+      FastGPIO::Pin<18>::setOutputValueHigh();
+      break;
+    case 9:
+      FastGPIO::Pin<19>::setOutputValueHigh();
+      break;
+    case 10:
+      FastGPIO::Pin<20>::setOutputValueHigh();
+      break;
+    case 11:
+      FastGPIO::Pin<21>::setOutputValueHigh();
+      break;
+  }
+
+}
diff --git a/keyboards/ut47/config.h b/keyboards/ut47/config.h
new file mode 100644
index 0000000000..4335e3edd5
--- /dev/null
+++ b/keyboards/ut47/config.h
@@ -0,0 +1,87 @@
+/*
+Copyright 2018 Carlos Filoteo
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    40percent.club
+#define PRODUCT         ut47
+#define DESCRIPTION     An awesome 40% keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+#define MATRIX_ROW_PINS { D1, D0, D4, C6 }
+#define MATRIX_COL_PINS { D7, E6, B4, B5, B6, B2, B3, B1, F7, F6, F5, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Enable GNAP matrix serial output */
+#define GNAP_ENABLE
+
+/* USART configuration */
+#ifdef __AVR_ATmega32U4__
+#      define SERIAL_UART_BAUD 9600
+#      define SERIAL_UART_DATA UDR1
+#      define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
+#      define SERIAL_UART_RXD_VECT USART1_RX_vect
+#      define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
+#      define SERIAL_UART_INIT() do { \
+            /* baud rate */ \
+            UBRR1L = SERIAL_UART_UBRR; \
+            /* baud rate */ \
+            UBRR1H = SERIAL_UART_UBRR >> 8; \
+            /* enable TX */ \
+            UCSR1B = _BV(TXEN1); \
+            /* 8-bit data */ \
+            UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
+            sei(); \
+        } while(0)
+#   else
+#       error "USART configuration is needed."
+#endif
+
+#endif
diff --git a/keyboards/ut47/keymaps/default/config.h b/keyboards/ut47/keymaps/default/config.h
new file mode 100644
index 0000000000..46098a22fb
--- /dev/null
+++ b/keyboards/ut47/keymaps/default/config.h
@@ -0,0 +1,24 @@
+/* Copyright 2018 Carlos Filoteo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+// place overrides here
+
+#endif
diff --git a/keyboards/ut47/keymaps/default/keymap.c b/keyboards/ut47/keymaps/default/keymap.c
new file mode 100644
index 0000000000..a02543dacb
--- /dev/null
+++ b/keyboards/ut47/keymaps/default/keymap.c
@@ -0,0 +1,88 @@
+/* Copyright 2018 Carlos Filoteo
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#ifdef LED_ENABLE
+  #include "protocol/serial.h"
+#endif
+
+#define _______ KC_TRNS
+#define LT3_TAB LT(3, KC_TAB)
+#define MT_RSFT_ENT MT(MOD_RSFT, KC_ENT)
+
+enum custom_keycodes {
+    LED_TOG = SAFE_RANGE,
+    LED_CHG
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+LAYOUT(
+  KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+  LT3_TAB, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MT_RSFT_ENT,
+  KC_LCTL, KC_LALT, KC_LGUI, KC_APP,  MO(2),      KC_SPC,        MO(1),  KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+LAYOUT(
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DELETE,
+  _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+  _______, KC_F11,  KC_F12,  KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  _______,
+  _______, _______, _______, KC_CAPS, _______,     _______,      _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
+),
+
+LAYOUT(
+  KC_FN6,  KC_FN7,  KC_FN8,  KC_FN9,  KC_FN10, KC_FN11, KC_FN12, KC_FN13, KC_FN14, KC_FN15, KC_FN16, KC_DELETE,
+  _______, _______, _______, _______, _______, _______, _______, KC_FN17, KC_FN18, KC_FN19, KC_FN20, KC_FN21,
+  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______,
+  _______, _______, _______, KC_CAPS, _______,     _______,      _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
+),
+
+LAYOUT( /* Tab */
+  KC_ESC,  KC_CALC, KC_WHOM, KC_MAIL, KC_MYCM, _______, _______, _______, _______, _______, KC_PSCR, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, LED_TOG, LED_CHG, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______,     _______,      _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R
+),
+};
+
+//LED keymap functions
+ #ifdef LED_ENABLE
+void led_chmode(void) {
+  serial_send(101);
+}
+
+void led_toggle(void) {
+  serial_send(100);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  if (record->event.pressed) {
+    switch(keycode) {
+      case LED_TOG:
+        #ifdef LED_ENABLE
+        led_toggle();
+        #endif
+        return false;
+      case LED_CHG:
+        #ifdef LED_ENABLE
+        led_chmode();
+        #endif
+        return false;
+    }
+  }
+  return true;
+};
+#endif
diff --git a/keyboards/ut47/keymaps/default/readme.md b/keyboards/ut47/keymaps/default/readme.md
new file mode 100644
index 0000000000..e09dc73fab
--- /dev/null
+++ b/keyboards/ut47/keymaps/default/readme.md
@@ -0,0 +1,19 @@
+# UT47 default keymap
+
+![UT47 layout image](https://i.imgur.com/Tsz5qsF.png)
+
+[KLE](http://www.keyboard-layout-editor.com/##@@_y:0%3B&=Esc&=Q&=W&=E&=R&=T&=Y&=U&=I&=O&=P&_w:1.5%3B&=Back%20Space&_x:0.25&a:4&f:4&w:4&h:4&d:true%3B&=%3Cb%3EGNAP!%3C%2F%2Fb%3E%3Cp%3E%3Cp%3EMinimum%20stagger%3Cp%3E47%20key%20layout%3B&@_a:7&f:3&w:1.25%3B&=Tab&=A&=S&=D&=F&=G&=H&=J&=K&=L&=%2F%3B&_w:1.25%3B&=%27%3B&@_w:1.5%3B&=Shift&=Z&=X&=C&=V&=B&=N&=M&=,&=.&=%2F%2F&=Return%3B&@=Ctrl&=Alt&=Super&=Menu&_w:1.25%3B&=%2F&dArr%2F%3B&_w:2%3B&=&_w:1.25%3B&=%2F&uArr%2F%3B&=%2F&larr%2F%3B&=%2F&darr%2F%3B&=%2F&uarr%2F%3B&=%2F&rarr%2F%3B%3B&=undefined)
+
+### LED Controls
+
+Use <kbd>TAB</kbd>+<kbd>Z</kbd> to cycle through brightness (8 steps)
+
+Use <kbd>TAB</kbd>+<kbd>X</kbd> to cycle through the following LED modes: 
+
+- solid
+- breathing
+- random
+- rain
+- reactive
+- poptang
+- off
diff --git a/keyboards/ut47/led.c b/keyboards/ut47/led.c
new file mode 100644
index 0000000000..9458c038fe
--- /dev/null
+++ b/keyboards/ut47/led.c
@@ -0,0 +1,38 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // output low
+        DDRB |= (1<<0);
+        PORTB &= ~(1<<0);
+        DDRD |= (1<<5);
+        PORTD &= ~(1<<5);
+    } else {
+        // Hi-Z
+        DDRB &= ~(1<<0);
+        PORTB &= ~(1<<0);
+        DDRD &= ~(1<<5);
+        PORTD &= ~(1<<5);
+    }
+}
diff --git a/keyboards/ut47/matrix.c b/keyboards/ut47/matrix.c
new file mode 100644
index 0000000000..18d420dbbb
--- /dev/null
+++ b/keyboards/ut47/matrix.c
@@ -0,0 +1,209 @@
+/*
+Copyright 2018 Carlos Filoteo
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "protocol/serial.h"
+
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE	5
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    // initialize row and col
+    unselect_rows();
+    init_cols();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    serial_init();
+}
+
+uint8_t matrix_scan(void)
+{
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+        matrix_row_t cols = read_cols();
+        if (matrix_debouncing[i] != cols) {
+            matrix_debouncing[i] = cols;
+            if (debouncing) {
+                debug("bounce!: "); debug_hex(debouncing); debug("\n");
+            }
+            debouncing = DEBOUNCE;
+        }
+        unselect_rows();
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+        }
+    }
+
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+/* Column pin configuration
+ * col: 0   1   2   3   4   5   6   7   8   9   10  11
+ * pin: D7  E6  B4  B5  B6  B2  B3  B1  F7  F6  F5  F4
+ */
+
+static void  init_cols(void)
+{
+    // Input with pull-up(DDR:0, PORT:1)
+    DDRF  &= ~(1<<4 | 1<<5 | 1<<6 | 1<<7);
+    PORTF |=  (1<<4 | 1<<5 | 1<<6 | 1<<7);
+    DDRE  &= ~(1<<6);
+    PORTE |=  (1<<6);
+    DDRD  &= ~(1<<7);
+    PORTD |=  (1<<7);
+    DDRB  &= ~(1<<1 | 1<<2 | 1<<3 | 1<<4 | 1<<5 | 1<<6);
+    PORTB |=  (1<<1 | 1<<2 | 1<<3 | 1<<4 | 1<<5 | 1<<6);
+}
+
+static matrix_row_t read_cols(void)
+{
+    return (PIND&(1<<7) ? 0 : (1<<0)) |
+           (PINE&(1<<6) ? 0 : (1<<1)) |
+           (PINB&(1<<4) ? 0 : (1<<2)) |
+           (PINB&(1<<5) ? 0 : (1<<3)) |
+           (PINB&(1<<6) ? 0 : (1<<4)) |
+           (PINB&(1<<2) ? 0 : (1<<5)) |
+           (PINB&(1<<3) ? 0 : (1<<6)) |
+           (PINB&(1<<1) ? 0 : (1<<7)) |
+           (PINF&(1<<7) ? 0 : (1<<8)) |
+           (PINF&(1<<6) ? 0 : (1<<9)) |
+           (PINF&(1<<5) ? 0 : (1<<10)) |
+           (PINF&(1<<4) ? 0 : (1<<11));
+}
+
+/* Row pin configuration
+ * row: 0   1   2   3
+ * pin: D1  D0  D4  C6
+ */
+
+static void unselect_rows(void)
+{
+    // Hi-Z(DDR:0, PORT:0) to unselect
+    DDRD  &= ~0b00010011;
+    PORTD &= ~0b00010011;
+    DDRC  &= ~0b01000000;
+    PORTC &= ~0b01000000;
+}
+
+static void select_row(uint8_t row)
+{
+    // Output low(DDR:1, PORT:0) to select
+    switch (row) {
+        case 0:
+            DDRD  |= (1<<1);
+            PORTD &= ~(1<<1);
+            break;
+        case 1:
+            DDRD  |= (1<<0);
+            PORTD &= ~(1<<0);
+            break;
+        case 2:
+            DDRD  |= (1<<4);
+            PORTD &= ~(1<<4);
+            break;
+        case 3:
+            DDRC  |= (1<<6);
+            PORTC &= ~(1<<6);
+            break;
+    }
+}
diff --git a/keyboards/ut47/readme.md b/keyboards/ut47/readme.md
new file mode 100644
index 0000000000..3f08b3b329
--- /dev/null
+++ b/keyboards/ut47/readme.md
@@ -0,0 +1,41 @@
+# ut47
+
+![ut47](https://i.imgur.com/ZDKZQaj.jpg)
+
+Somewhere between ortholinear and standard offset. Created to have all the same functions on a Planck in a keyboard but with a more conventional keyboard row stagger.
+
+Keyboard Maintainer: [filoxo](https://github.com/filoxo), [network_operations]
+
+Hardware Supported: [PCB design](http://www.40percent.club/2016/10/gnap-20-plateless.html), Arduino Pro Micro
+
+Hardware Availability: [How to order](http://www.40percent.club/2017/03/ordering-pcb.html)
+
+### Instructions
+
+To flash the UT47 without LEDs (single controller), run:
+
+    make ut47:default
+
+To enable the UT47 LEDs (dual controller), run this for the main controller:
+
+    make ut47:default LED_ENABLE=yes
+
+Or you can add `LED_ENABLE = yes` to *rules.mk*
+
+And then flash [LED_controls.ino](LED_controls.ino) to the second controller using [Arduino IDE](https://www.arduino.cc/en/Main/Software) or similar. NOTE: Arduino IDE will require importing additional libraries to compile. 
+
+<small>The reason this is an "opt-in" feature is to prevent sending serial communication over the pin, in case it ends up being used for something else (like RGB underglow).</small>
+
+### Layout
+
+Go to the [default layout README](keymaps/default/readme.md) for more information.
+
+### Additional info
+
+Credit: Forked from [di0ib TMK version](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/gnap)
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+### Build Guide
+
+[u/network_operations' build guide thread](https://www.reddit.com/r/MechanicalKeyboards/comments/7wqktu/gnap_the_cheap_40/)
diff --git a/keyboards/ut47/rules.mk b/keyboards/ut47/rules.mk
new file mode 100644
index 0000000000..b046598669
--- /dev/null
+++ b/keyboards/ut47/rules.mk
@@ -0,0 +1,70 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Bootloader
+BOOTLOADER = caterina
+
+# custom matrix setup
+CUSTOM_MATRIX = yes
+SRC += matrix.c protocol/serial_uart.c
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)