Add Unicomp PC122 keyboard (#18326)

1 files changed, 68 insertions, 0 deletions

diff --git a/keyboards/unicomp/pc122/overnumpad_1xb/config.h b/keyboards/unicomp/pc122/overnumpad_1xb/config.h
new file mode 100644
index 0000000000..ad7668bdea
--- /dev/null
+++ b/keyboards/unicomp/pc122/overnumpad_1xb/config.h
@@ -0,0 +1,68 @@
+/* Copyright 2020 Purdea Andrei
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+#define SERIAL_NUMBER "purdea.ro:overnumpad_controller"
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+
+// All pins in order from left-to-right, as seen on the keyboard:
+// C3, C2, C1, C0, A3, A4, A5, A6, A7, C4, C5, B0, B1, B10, B12, B13, B14, B15, C6, C7, C8, C9, A8, A9, A10, 
+// On this chip A10, B10 have stronger pull-ups, so it's better to avoid them if possible.
+
+// On this keyboard the right-most pin is not used, so that is A10.
+// On this keyboard the right-most 8 pins (excluding the unused pin) are routed on the bottom.
+
+#define MATRIX_COL_PINS { C3, C2, C1, C0, A3, A4, A5, A6, A7, C4, C5, B0, B1, B10, B12, B13 }
+#define MATRIX_ROW_PINS { B14, B15, C6, C7, C8, C9, A8, A9 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION ROW2COL
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+#define MATRIX_HAS_GHOST
+
+#define STM32_HSECLK 16000000
+
+#define SOLENOID_PIN B5
+#define HAPTIC_ENABLE_PIN C13
+#define SOLENOID_DEFAULT_DWELL 4
+#define SOLENOID_MIN_DWELL 4
+#define HAPTIC_OFF_IN_LOW_POWER 1
+#define NO_HAPTIC_MOD
+
+#define LED_NUM_LOCK_PIN C12
+#define LED_CAPS_LOCK_PIN C11
+#define LED_SCROLL_LOCK_PIN C10
+#define LED_ON_STATE 1