Telophase cleanup (#13225)

1 files changed, 33 insertions, 20 deletions

diff --git a/keyboards/telophase/config.h b/keyboards/telophase/config.h
index c67dd939bf..51718da9d4 100644
--- a/keyboards/telophase/config.h
+++ b/keyboards/telophase/config.h
@@ -1,5 +1,5 @@
 /*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2021
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -15,32 +15,45 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    unknown
-#define PRODUCT         Telophase
+#define VENDOR_ID    0xFEED
+#define PRODUCT_ID   0x6060
+#define DEVICE_VER   0x0001
+#define MANUFACTURER unknown
+#define PRODUCT      Telophase
 
 /* key matrix size */
 #define MATRIX_ROWS 4
 #define MATRIX_COLS 12
 
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-//#define BACKLIGHT_LEVELS 3
-
 #define ONESHOT_TIMEOUT 500
 
 /*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
@@ -55,10 +68,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
 
-//UART settings for communication with the RF microcontroller
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+// UART settings for communication with the RF microcontroller
 #define SERIAL_UART_BAUD 1000000
 #define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
 #define SERIAL_UART_INIT_CUSTOM       \
@@ -66,5 +81,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
     /* 8-bit data */                  \
     UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
-
-#endif