ChibiOS conf migrations... take 3 (#11261)

* Add SPI1 DMA stream definitions.

* ChibiOS conf upgrade for acheron/lasgweloth

 acheron/lasgweloth - 3bedb0fe1f1b542b4d90daeaeab8905cd9ee992c

* ChibiOS conf upgrade for box75

 box75 - ff91bacf5cec0b42df02967eb0ecbf4bd1b56928

* ChibiOS conf upgrade for geekboards/macropad_v2

 geekboards/macropad_v2 - 1c205720d47f7e636173064b1aef1637860a9134

* ChibiOS conf upgrade for iron180

 iron180 - 867929d78361a50e34671e4e167cafd927d8982b

* ChibiOS conf upgrade for technika

 technika - cb9295b90980eb8dfdc63d6031533edbb344c045

1 files changed, 22 insertions, 164 deletions

diff --git a/keyboards/technika/mcuconf.h b/keyboards/technika/mcuconf.h
index 5df5e5cc4c..b2639511d6 100644
--- a/keyboards/technika/mcuconf.h
+++ b/keyboards/technika/mcuconf.h
@@ -1,176 +1,34 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
-
-/*
- * STM32F0xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
+/* Copyright 2020 QMK
  *
- * IRQ priorities:
- * 3...0       Lowest...Highest.
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
  *
- * DMA priorities:
- * 0...3        Lowest...Highest.
- */
-
-#define STM32F0xx_MCUCONF
-// #define STM32F070xB
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT                       FALSE
-#define STM32_PVD_ENABLE                    FALSE
-#define STM32_PLS                           STM32_PLS_LEV0
-#define STM32_HSI_ENABLED                   TRUE
-#define STM32_HSI14_ENABLED                 TRUE
-#define STM32_HSI48_ENABLED                 FALSE
-#define STM32_LSI_ENABLED                   TRUE
-#define STM32_HSE_ENABLED                   FALSE
-#define STM32_LSE_ENABLED                   FALSE
-#define STM32_SW                            STM32_SW_PLL
-#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
-#define STM32_PREDIV_VALUE                  1
-#define STM32_PLLMUL_VALUE                  12
-#define STM32_HPRE                          STM32_HPRE_DIV1
-#define STM32_PPRE                          STM32_PPRE_DIV1
-#define STM32_ADCSW                         STM32_ADCSW_HSI14
-#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
-#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
-#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
-#define STM32_ADCSW                         STM32_ADCSW_HSI14
-#define STM32_USBSW                         STM32_USBSW_HSI48
-#define STM32_CECSW                         STM32_CECSW_HSI
-#define STM32_I2C1SW                        STM32_I2C1SW_HSI
-#define STM32_USART1SW                      STM32_USART1SW_PCLK
-#define STM32_RTCSEL                        STM32_RTCSEL_LSI
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_USE_ADC1                  FALSE
-#define STM32_ADC_ADC1_DMA_PRIORITY         2
-#define STM32_ADC_IRQ_PRIORITY              2
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
-
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
-#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
-#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
-#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
-#define STM32_EXT_EXTI17_IRQ_PRIORITY       3
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1                  FALSE
-#define STM32_GPT_USE_TIM2                  FALSE
-#define STM32_GPT_USE_TIM3                  FALSE
-#define STM32_GPT_USE_TIM14                 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY         2
-#define STM32_GPT_TIM2_IRQ_PRIORITY         2
-#define STM32_GPT_TIM3_IRQ_PRIORITY         2
-#define STM32_GPT_TIM14_IRQ_PRIORITY        2
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1                  FALSE
-#define STM32_I2C_USE_I2C2                  FALSE
-#define STM32_I2C_BUSY_TIMEOUT              50
-#define STM32_I2C_I2C1_IRQ_PRIORITY         3
-#define STM32_I2C_I2C2_IRQ_PRIORITY         3
-#define STM32_I2C_USE_DMA                   FALSE
-#define STM32_I2C_I2C1_DMA_PRIORITY         1
-#define STM32_I2C_I2C2_DMA_PRIORITY         1
-#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
-#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#define STM32_ICU_USE_TIM1                  FALSE
-#define STM32_ICU_USE_TIM2                  FALSE
-#define STM32_ICU_USE_TIM3                  FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY         3
-#define STM32_ICU_TIM2_IRQ_PRIORITY         3
-#define STM32_ICU_TIM3_IRQ_PRIORITY         3
 
 /*
- * PWM driver system settings.
+ * This file was auto-generated by:
+ *    `qmk chibios-confupdate -i keyboards/technika/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h`
  */
-#define STM32_PWM_USE_ADVANCED              FALSE
-#define STM32_PWM_USE_TIM1                  FALSE
-#define STM32_PWM_USE_TIM2                  FALSE
-#define STM32_PWM_USE_TIM3                  TRUE
-#define STM32_PWM_TIM1_IRQ_PRIORITY         3
-#define STM32_PWM_TIM2_IRQ_PRIORITY         3
-#define STM32_PWM_TIM3_IRQ_PRIORITY         3
 
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1             FALSE
-#define STM32_SERIAL_USE_USART2             FALSE
-#define STM32_SERIAL_USART1_PRIORITY        3
-#define STM32_SERIAL_USART2_PRIORITY        3
+#pragma once
 
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1                  FALSE
-#define STM32_SPI_USE_SPI2                  TRUE
-#define STM32_SPI_SPI1_DMA_PRIORITY         1
-#define STM32_SPI_SPI2_DMA_PRIORITY         1
-#define STM32_SPI_SPI1_IRQ_PRIORITY         2
-#define STM32_SPI_SPI2_IRQ_PRIORITY         2
-#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
-#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
-#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+#include_next <mcuconf.h>
 
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY               2
-#define STM32_ST_USE_TIMER                  2
+#undef STM32_I2C_USE_DMA
+#define STM32_I2C_USE_DMA FALSE
 
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1               FALSE
-#define STM32_UART_USE_USART2               FALSE
-#define STM32_UART_USART1_IRQ_PRIORITY      3
-#define STM32_UART_USART2_IRQ_PRIORITY      3
-#define STM32_UART_USART1_DMA_PRIORITY      0
-#define STM32_UART_USART2_DMA_PRIORITY      0
-#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+#undef STM32_PWM_USE_TIM3
+#define STM32_PWM_USE_TIM3 TRUE
 
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_USB1                  TRUE
-#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
-#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+#undef STM32_SPI_USE_SPI2
+#define STM32_SPI_USE_SPI2 TRUE
 
-#endif /* _MCUCONF_H_ */