Merge upstream master

1 files changed, 89 insertions, 0 deletions

diff --git a/keyboards/splitkb/kyria/rev1/config.h b/keyboards/splitkb/kyria/rev1/config.h
new file mode 100644
index 0000000000..7bc756c042
--- /dev/null
+++ b/keyboards/splitkb/kyria/rev1/config.h
@@ -0,0 +1,89 @@
+/*
+Copyright 2022 Thomas Baart <thomas@splitkb.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* key matrix size */
+/* Rows are doubled up */
+#define MATRIX_ROWS  8
+#define MATRIX_COLS  8
+
+// wiring
+#define MATRIX_ROW_PINS \
+    { B4, E6, D7, D4 }
+#define MATRIX_COL_PINS \
+    { B6, B2, B3, B1, F7, F6, F5, F4 }
+
+#define ENCODERS_PAD_A \
+    { C6 }
+#define ENCODERS_PAD_B \
+    { B5 }
+#define ENCODERS_PAD_A_RIGHT \
+    { B5 }
+#define ENCODERS_PAD_B_RIGHT \
+    { C6 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE        5
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+
+#if defined(CONVERT_TO_PROTON_C)
+#    define SERIAL_USART_FULL_DUPLEX      // Enable full duplex operation mode.
+#    define SERIAL_USART_PIN_SWAP         // Swap TX and RX pins if keyboard is master halve.
+#    define SERIAL_USART_DRIVER      SD1  // USART driver of TX pin. default: SD1
+#    define SERIAL_USART_TX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
+#    define SERIAL_USART_TX_PIN      D3
+#    define SERIAL_USART_RX_PIN      D2
+
+#    define RGB_DI_PIN               PAL_LINE(GPIOA, 3)
+#    define WS2812_PWM_DRIVER        PWMD2                  // default: PWMD2
+#    define WS2812_PWM_CHANNEL       4                      // default: 2
+#    define WS2812_PWM_PAL_MODE      1                      // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
+#    define WS2812_DMA_STREAM        STM32_DMA1_STREAM2     // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+#    define WS2812_DMA_CHANNEL       2                      // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+#    define WS2812_DMAMUX_ID         STM32_DMAMUX1_TIM2_UP  // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
+#else
+#    define RGB_DI_PIN D3
+#    define SOFT_SERIAL_PIN D2
+#endif
+
+#define RGBLED_SPLIT \
+    { 10, 10 }
+#define RGBLED_NUM 20
+
+#ifdef OLED_ENABLE
+#    define OLED_DISPLAY_128X64
+#    define SPLIT_OLED_ENABLE
+#endif
+
+/* RGB matrix support */
+#ifdef RGB_MATRIX_ENABLE
+#    define SPLIT_TRANSPORT_MIRROR
+#    define RGB_MATRIX_LED_COUNT RGBLED_NUM // Number of LEDs
+#    define RGB_MATRIX_SPLIT { 10, 10 }
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 170
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED
+#endif