Merge upstream master to 2022 Q4 breaking change

1 files changed, 0 insertions, 89 deletions

diff --git a/keyboards/splitkb/kyria/rev1/config.h b/keyboards/splitkb/kyria/rev1/config.h
deleted file mode 100644
index 7bc756c042..0000000000
--- a/keyboards/splitkb/kyria/rev1/config.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
-Copyright 2022 Thomas Baart <thomas@splitkb.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* key matrix size */
-/* Rows are doubled up */
-#define MATRIX_ROWS  8
-#define MATRIX_COLS  8
-
-// wiring
-#define MATRIX_ROW_PINS \
-    { B4, E6, D7, D4 }
-#define MATRIX_COL_PINS \
-    { B6, B2, B3, B1, F7, F6, F5, F4 }
-
-#define ENCODERS_PAD_A \
-    { C6 }
-#define ENCODERS_PAD_B \
-    { B5 }
-#define ENCODERS_PAD_A_RIGHT \
-    { B5 }
-#define ENCODERS_PAD_B_RIGHT \
-    { C6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE        5
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-
-#if defined(CONVERT_TO_PROTON_C)
-#    define SERIAL_USART_FULL_DUPLEX      // Enable full duplex operation mode.
-#    define SERIAL_USART_PIN_SWAP         // Swap TX and RX pins if keyboard is master halve.
-#    define SERIAL_USART_DRIVER      SD1  // USART driver of TX pin. default: SD1
-#    define SERIAL_USART_TX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
-#    define SERIAL_USART_TX_PIN      D3
-#    define SERIAL_USART_RX_PIN      D2
-
-#    define RGB_DI_PIN               PAL_LINE(GPIOA, 3)
-#    define WS2812_PWM_DRIVER        PWMD2                  // default: PWMD2
-#    define WS2812_PWM_CHANNEL       4                      // default: 2
-#    define WS2812_PWM_PAL_MODE      1                      // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
-#    define WS2812_DMA_STREAM        STM32_DMA1_STREAM2     // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-#    define WS2812_DMA_CHANNEL       2                      // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
-#    define WS2812_DMAMUX_ID         STM32_DMAMUX1_TIM2_UP  // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
-#else
-#    define RGB_DI_PIN D3
-#    define SOFT_SERIAL_PIN D2
-#endif
-
-#define RGBLED_SPLIT \
-    { 10, 10 }
-#define RGBLED_NUM 20
-
-#ifdef OLED_ENABLE
-#    define OLED_DISPLAY_128X64
-#    define SPLIT_OLED_ENABLE
-#endif
-
-/* RGB matrix support */
-#ifdef RGB_MATRIX_ENABLE
-#    define SPLIT_TRANSPORT_MIRROR
-#    define RGB_MATRIX_LED_COUNT RGBLED_NUM // Number of LEDs
-#    define RGB_MATRIX_SPLIT { 10, 10 }
-#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 170
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED
-#endif