Keyboard: Add new keyboard "Sol" from RGBKB (#4497)

* Add final RGBKB Sol firmware

* Apply suggestions from code review

Apply most of the changes noroadsleft has suggested

Co-Authored-By: Legonut <legonut3@gmail.com>

* Cleanup readme

* Cleanup keymaps per @noroadslefts suggestions

* Remove eeproms, use set_single_persistent_default_layer

* Suggestions from @noroadsleft and @drashna

some small cleanup

* Change RGB_SMOD to RGB_RMOD

* fix RGB_SMOD

* Apply suggestions from code review

Remove redundant lines

Co-Authored-By: Legonut <legonut3@gmail.com>

1 files changed, 155 insertions, 0 deletions

diff --git a/keyboards/sol/rev1/config.h b/keyboards/sol/rev1/config.h
new file mode 100644
index 0000000000..fc91b8d499
--- /dev/null
+++ b/keyboards/sol/rev1/config.h
@@ -0,0 +1,155 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV1_CONFIG_H
+#define REV1_CONFIG_H
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x3060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    RGBKB
+#define PRODUCT         Sol
+#define DESCRIPTION     "An RGB, split, ortho-esque keyboard"
+
+
+#define PREVENT_STUCK_MODIFIERS
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 150
+
+#define USE_I2C
+#define USE_SERIAL
+#define USE_SERIAL_PD3
+
+/* Select hand configuration */
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+// Helix keyboard OLED support
+//      see ./rules.mk: OLED_ENABLE=yes or no
+#ifdef OLED_ENABLE
+  #define SSD1306OLED
+#endif
+
+/* Select rows configuration */
+// Rows are 4 or 5
+// #define HELIX_ROWS 5 see ./rules.mk
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 12
+#define MATRIX_ROW_PINS { C6, B6, B5, B4, D7, E6}
+
+// wiring of each half
+#define MATRIX_COLS 7
+#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7 }
+// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN B3
+#define RGBLIGHT_TIMER
+//#define RGBLED_NUM 12    // Number of LEDs. see ./keymaps/default/config.h
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+#define DRIVER_COUNT      2
+#define DRIVER_LED_TOTAL  70
+// #define RGB_MATRIX_KEYPRESSES
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_LEVELS 5
+
+#ifdef LED_MIRRORED
+  #define RGBLED_NUM 35
+#else
+  #define RGBLED_NUM 70
+#endif
+
+#define RGBLIGHT_RAINBOW_SWIRL_RANGE 1950
+
+#ifdef IOS_DEVICE_ENABLE
+  #define RGBLIGHT_LIMIT_VAL 40
+  #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 40
+#elif RGBLIGHT_FULL_POWER
+  #define RGBLIGHT_LIMIT_VAL 255
+  #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255
+#else
+  #define RGBLIGHT_LIMIT_VAL 120
+  #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120
+#endif
+
+#define RGBLIGHT_VAL_STEP (RGBLIGHT_LIMIT_VAL / 10)
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+
+#define RGBLIGHT_ANIMATIONS
+
+#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
+// USB_MAX_POWER_CONSUMPTION value for Helix keyboard
+//  120  RGBoff, OLEDoff
+//  120  OLED
+//  330  RGB 6
+//  300  RGB 32
+//  310  OLED & RGB 32
+  #define USB_MAX_POWER_CONSUMPTION 500
+#else
+  // fix iPhone and iPad power adapter issue
+  // iOS device need lessthan 100
+  #define USB_MAX_POWER_CONSUMPTION 100
+#endif
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+
+#endif