Keyboard: Add new keyboard "Sol" from RGBKB (#4497)

* Add final RGBKB Sol firmware

* Apply suggestions from code review

Apply most of the changes noroadsleft has suggested

Co-Authored-By: Legonut <legonut3@gmail.com>

* Cleanup readme

* Cleanup keymaps per @noroadslefts suggestions

* Remove eeproms, use set_single_persistent_default_layer

* Suggestions from @noroadsleft and @drashna

some small cleanup

* Change RGB_SMOD to RGB_RMOD

* fix RGB_SMOD

* Apply suggestions from code review

Remove redundant lines

Co-Authored-By: Legonut <legonut3@gmail.com>

3 files changed, 364 insertions, 0 deletions

diff --git a/keyboards/sol/keymaps/brianweyer/config.h b/keyboards/sol/keymaps/brianweyer/config.h
new file mode 100755
index 0000000000..87b7dd2ac0
--- /dev/null
+++ b/keyboards/sol/keymaps/brianweyer/config.h
@@ -0,0 +1,27 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define SSD1306OLED
+
+
+// place overrides here
+
diff --git a/keyboards/sol/keymaps/brianweyer/keymap.c b/keyboards/sol/keymaps/brianweyer/keymap.c
new file mode 100755
index 0000000000..2259e246d2
--- /dev/null
+++ b/keyboards/sol/keymaps/brianweyer/keymap.c
@@ -0,0 +1,291 @@
+#include QMK_KEYBOARD_H
+#ifdef PROTOCOL_LUFA
+#include "lufa.h"
+#include "split_util.h"
+#endif
+#ifdef SSD1306OLED
+  #include "common/ssd1306.h"
+#endif
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+extern uint8_t is_master;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layer_number {
+    _QWERTY = 0,
+    _FN,
+    _ADJ
+};
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  FN,
+  ADJ,
+  RGBRST
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* QWERTY
+   * ,------------------------------------------------.  ,------------------------------------------------.
+   * |   `  |   1  |   2  |   3  |   4  |   5  |   -  |  |   =  |   6  |   7  |   8  |   9  |   0  | Bspc |
+   * |------+------+------+------+------+------|------|  |------|------+------+------+------+------+------|
+   * |  Tab |   Q  |   W  |   E  |   R  |   T  |   [  |  |   ]  |   Y  |   U  |   I  |   O  |   P  |   \  |
+   * |------+------+------+------+------+------|------|  |------|------+------+------+------+------+------|
+   * |  Esc |   A  |   S  |   D  |   F  |   G  |      |  |      |   H  |   J  |   K  |   L  |   ;  |   '  |
+   * |------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |      |  |      |   N  |   M  |   ,  |   .  |   /  | Shift|
+   * |------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+   * | Ctrl |  Alt |  FN  | LGui |  RGB |  Spc |  Del |  | Bspc |  Spc |  Adj | LGui |  FN  |  Alt | Ctrl |
+   * |------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+   *                                    |  Spc |  Ent |  |  Ent |  Spc |
+   *                                    `-------------'  `-------------'
+   */
+  [_QWERTY] = LAYOUT_kc( \
+  //,--------+--------+--------+--------+--------+--------+--+--------+.   ,--------+--+--------+--------+--------+--------+--------+--------+
+          GRV,       1,       2,       3,       4,       5,       MINS,          EQL,          6,       7,       8,       9,       0,    BSPC,
+  //|--------+--------+--------+--------+--------+--------+--+--------|    |--------+--+--------+--------+--------+--------+--------+--------|
+          TAB,       Q,       W,       E,       R,       T,       LBRC,         RBRC,          Y,       U,       I,       O,       P,    BSLS,
+  //|--------+--------+--------+--------+--------+--------+--+--------|    |--------+--+--------+--------+--------+--------+--------+--------|
+          ESC,       A,       S,       D,       F,       G,    _______,      _______,          H,       J,       K,       L,    SCLN,    QUOT,
+  //|--------+--------+--------+--------+--------+--------+--+--------|    |--------+--+--------+--------+--------+--------+--------+--------|
+         LSPO,       Z,       X,       C,       V,       B,    _______,      _______,          N,       M,    COMM,     DOT,    SLSH,    RSPC,
+  //|--------+--------+--------+--------+--------+--------+--+--------|    |--------+--+--------+--------+--------+--------+--------+--------|
+         LCTL,    LALT,      FN,    LGUI, RGB_MOD,        SPC,     DEL,         BSPC,        SPC,     ADJ,    LGUI,      FN,    LALT,    LCTL,
+  //|--------+--------+--------+--------+--------+--+--------+--------|    |--------+--+--------+--------+--------+--------+--------+--------|
+                           VOLD,    VOLU,                 SPC,     ENT,          ENT,        SPC,             DOWN,    UP
+  //                      Rotary Left               |--------+--------|    |--------+-----------+              Rotary Right
+      ),
+
+  /* FN
+   * ,------------------------------------------------.  ,------------------------------------------------.
+   * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |      |  |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+   * |------+------+------+------+------+------|------|  |------|------+------+------+------+------+------|
+   * |      |      |      |  Up  |      |      |      |  |      |      |      |      |      |      |      |
+   * |------+------+------+------+------+------|------|  |------|------+------+------+------+------+------|
+   * |      |      | Left | Down | Right|      |      |  |      | Play | Next | Mute | V-Up |V-Down|      |
+   * |------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |  |      |      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |  |      |      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+   *                                    |      |      |  |      |      |
+   *                                    `-------------'  `-------------'
+   */
+  [_FN] = LAYOUT_kc( \
+  //,--------+--------+--------+--------+--------+--------+--+--------+.   ,--------+--+--------+--------+--------+--------+--------+--------+
+           F1,      F2,      F3,      F4,      F5,      F6,    _______,      _______,         F7,      F8,      F9,     F10,     F11,     F12,
+  //|--------+--------+--------+--------+--------+--------+--+--------|    |--------+--+--------+--------+--------+--------+--------+--------|
+      _______, _______, _______,      UP, _______, _______,    _______,      _______,    _______, _______, _______, _______, _______, _______,
+  //|--------+--------+--------+--------+--------+--------+--+--------|    |--------+--+--------+--------+--------+--------+--------+--------|
+      _______, _______,    LEFT,    DOWN,    RGHT, _______,    _______,      _______,       MPLY,    MNXT,    MUTE,    VOLD,    VOLU, _______,
+  //|--------+--------+--------+--------+--------+--------+--+--------|    |--------+--+--------+--------+--------+--------+--------+--------|
+      _______, _______, _______, _______, _______, _______,    _______,      _______,    _______, _______, _______, _______, _______, _______,
+  //|--------+--------+--------+--------+--------+--------+--+--------|    |--------+--+--------+--------+--------+--------+--------+--------|
+      _______, _______, _______, _______, _______,    _______, _______,      _______,    _______, _______, _______, _______, _______, _______,
+  //|--------+--------+--------+--------+--------+--+--------+--------|    |--------+--+--------+--------+--------+--------+--------+--------|
+                           VOLD,    VOLU,             _______, _______,      _______,    _______,               UP,    DOWN
+  //                      Rotary Left               |--------+--------|    |--------+-----------+              Rotary Right
+      ),
+
+  /* ADJ
+   * ,------------------------------------------------.  ,------------------------------------------------.
+   * |      |      |      |      |      |      |      |  |      |      |      |      |      |      |      |
+   * |------+------+------+------+------+------|------|  |------|------+------+------+------+------+------|
+   * |      | Sat+ | Val+ | Hue+ |Speed+|Toggle|      |  |      |      |      |      |      |      |      |
+   * |------+------+------+------+------+------|------|  |------|------+------+------+------+------+------|
+   * |      | Sat- | Val- | Hue- |Speed-|Reset |      |  |      |      |QWERTY| COLE |      |      |      |
+   * |------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |  |      |      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |  |      |      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+   *                                    |      |      |  |      |      |
+   *                                    `-------------'  `-------------'
+   */
+
+  [_ADJ] =  LAYOUT( \
+  //,--------+--------+--------+--------+--------+--------+--+--------+.   ,--------+--+--------+--------+--------+--------+--------+--------+
+        RESET, _______, _______, _______, _______, _______,    _______,      _______,    _______, _______, _______, _______, _______,   RESET, \
+  //|--------+--------+--------+--------+--------+--------+--+--------|    |--------+--+--------+--------+--------+--------+--------+--------|
+      _______, RGB_SAI, RGB_VAI, RGB_HUI, RGB_SPI, RGB_TOG,    _______,      _______,    _______, _______, _______, _______, _______, _______, \
+  //|--------+--------+--------+--------+--------+--------+--+--------|    |--------+--+--------+--------+--------+--------+--------+--------|
+      _______, RGB_SAD, RGB_VAD, RGB_HUD, RGB_SPD,  RGBRST,    _______,      _______,    _______, _______, _______, _______, _______, _______, \
+  //|--------+--------+--------+--------+--------+--------+--+--------|    |--------+--+--------+--------+--------+--------+--------+--------|
+      _______, _______, _______, _______, _______, _______,    _______,      _______,    _______, _______, _______, _______, _______, _______, \
+  //|--------+--------+--------+--------+--------+--------+--+--------|    |--------+--+--------+--------+--------+--------+--------+--------|
+      _______, _______, _______, _______, _______,    _______, _______,      _______, _______,    _______, _______, _______, _______, _______, \
+  //|--------+--------+--------+--------+--------+--+--------+--------|    |--------+--------+--+--------+--------+--------+--------+--------|
+                        _______, _______,             _______, _______,      _______, _______,             _______, _______ \
+  //                      Rotary Left               |--------+--------|    |--------+--------+              Rotary Right
+      )
+};
+
+
+// define variables for reactive RGB
+bool TOG_STATUS = false;
+int RGB_current_mode;
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case FN:
+      if (record->event.pressed) {
+        layer_on(_FN);
+      } else {
+        layer_off(_FN);
+      }
+      return false;
+      break;
+    case ADJ:
+        if (record->event.pressed) {
+          layer_on(_ADJ);
+        } else {
+          layer_off(_ADJ);
+        }
+        return false;
+        break;
+      //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
+    case RGBRST:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgblight_default();
+          rgblight_enable();
+          RGB_current_mode = rgblight_config.mode;
+        }
+      #endif
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+    #ifdef RGBLIGHT_ENABLE
+      RGB_current_mode = rgblight_config.mode;
+    #endif
+    //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
+    #ifdef SSD1306OLED
+        iota_gfx_init(!has_usb());   // turns on the display
+    #endif
+}
+
+void matrix_scan_user(void) {
+  #ifdef SSD1306OLED
+    // led_test_init();
+    iota_gfx_task();  // this is what updates the display continuously
+  #endif
+}
+
+
+//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
+#ifdef SSD1306OLED
+
+// hook point for 'led_test' keymap
+//   'default' keymap's led_test_init() is empty function, do nothing
+//   'led_test' keymap's led_test_init() force rgblight_mode_noeeprom(35);
+__attribute__ ((weak))
+void led_test_init(void) {}
+
+void matrix_update(struct CharacterMatrix *dest,
+                          const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+//assign the right code to your layers for OLED display
+#define L_BASE 0
+#define L_FN (1<<_FN)
+#define L_ADJ (1<<_ADJ)
+#define L_ADJ_TRI (L_ADJ|L_FN)
+
+static void render_logo(struct CharacterMatrix *matrix) {
+
+  static char logo[]={
+    0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
+    0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
+    0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
+    0};
+  matrix_write(matrix, logo);
+}
+
+
+
+void render_status(struct CharacterMatrix *matrix) {
+
+  // Render to mode icon
+  static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
+  if(keymap_config.swap_lalt_lgui==false){
+    matrix_write(matrix, logo[0][0]);
+    matrix_write_P(matrix, PSTR("\n"));
+    matrix_write(matrix, logo[0][1]);
+  }else{
+    matrix_write(matrix, logo[1][0]);
+    matrix_write_P(matrix, PSTR("\n"));
+    matrix_write(matrix, logo[1][1]);
+  }
+
+  // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
+  char buf[40];
+  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
+  matrix_write_P(matrix, PSTR("\nLayer: "));
+    switch (layer_state) {
+        case L_BASE:
+           matrix_write_P(matrix, PSTR("Laser"));
+           break;
+        case L_FN:
+           matrix_write_P(matrix, PSTR("Function"));
+           break;
+        case L_ADJ:
+        case L_ADJ_TRI:
+           matrix_write_P(matrix, PSTR("Adjustment"));
+           break;
+        default:
+           matrix_write(matrix, buf);
+    }
+
+  // Host Keyboard LED Status
+  char led[40];
+    snprintf(led, sizeof(led), "\n%s  %s  %s",
+            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
+            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
+            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
+  matrix_write(matrix, led);
+}
+
+
+void iota_gfx_task_user(void) {
+  struct CharacterMatrix matrix;
+
+#if DEBUG_TO_SCREEN
+  if (debug_enable) {
+    return;
+  }
+#endif
+
+  matrix_clear(&matrix);
+  if(is_master){
+    render_status(&matrix);
+  }else{
+    render_logo(&matrix);
+  }
+  matrix_update(&display, &matrix);
+}
+
+#endif
diff --git a/keyboards/sol/keymaps/brianweyer/rules.mk b/keyboards/sol/keymaps/brianweyer/rules.mk
new file mode 100755
index 0000000000..d53ebe34dd
--- /dev/null
+++ b/keyboards/sol/keymaps/brianweyer/rules.mk
@@ -0,0 +1,46 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = yes       # Enable global lighting effects. Do not enable with RGB Matrix
+LED_ANIMATIONS = yes        # LED animations
+LED_MIRRORED = no           # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master)
+RGB_MATRIX_ENABLE = no      # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500)
+RGB_MATRIX_KEYPRESSES = no  # Enable reactive per-key effects. Can be very laggy (+1500)
+RGBLIGHT_FULL_POWER = no    # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port
+UNICODE_ENABLE = no         # Unicode
+SWAP_HANDS_ENABLE = no      # Enable one-hand typing
+ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder (+90)
+OLED_ENABLE = yes           # OLED_ENABLE (+5000)
+IOS_DEVICE_ENABLE = no      # Limit max brightness to connect to IOS device (iPad,iPhone)
+
+# Do not edit past here
+
+ifeq ($(strip $(OLED_ENABLE)), yes)
+    OPT_DEFS += -DOLED_ENABLE
+endif
+
+ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes)
+    OPT_DEFS += -DENCODER_ENABLE_CUSTOM
+    SRC += common/knob_v2.c
+endif
+
+ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
+    OPT_DEFS += -DIOS_DEVICE_ENABLE
+else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes)
+    OPT_DEFS += -DRGBLIGHT_FULL_POWER
+endif
+
+ifeq ($(strip $(RGB_MATRIX_KEYPRESSES)), yes)
+    OPT_DEFS += -DRGB_MATRIX_KEYPRESSES
+endif
+
+ifeq ($(strip $(LED_MIRRORED)), yes)
+    OPT_DEFS += -DLED_MIRRORED
+endif