Merge upstream master

2 files changed, 162 insertions, 0 deletions

diff --git a/keyboards/smallkeyboard/config.h b/keyboards/smallkeyboard/config.h
new file mode 100644
index 0000000000..04fa427e69
--- /dev/null
+++ b/keyboards/smallkeyboard/config.h
@@ -0,0 +1,113 @@
+/* Copyright 2021 zhouqiong19840119
+  *
+  * This program is free software: you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation, either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+  */
+
+
+#pragma once
+
+#include "config_common.h"
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS {C7, C6 }
+#define MATRIX_COL_PINS {F7, F6, F5}
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION ROW2COL
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 3
+
+#ifdef RGB_MATRIX_ENABLE
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
+#    define RGB_MATRIX_KEYPRESSES
+#    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define ENABLE_RGB_MATRIX_ALPHAS_MODS
+// #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#define ENABLE_RGB_MATRIX_BREATHING
+// #define ENABLE_RGB_MATRIX_BAND_SAT
+#define ENABLE_RGB_MATRIX_BAND_VAL
+// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#define ENABLE_RGB_MATRIX_CYCLE_ALL
+#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+#define ENABLE_RGB_MATRIX_DUAL_BEACON
+#define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#define ENABLE_RGB_MATRIX_RAINDROPS
+#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#define ENABLE_RGB_MATRIX_HUE_BREATHING
+#define ENABLE_RGB_MATRIX_HUE_PENDULUM
+#define ENABLE_RGB_MATRIX_HUE_WAVE
+// #define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
+#define ENABLE_RGB_MATRIX_PIXEL_RAIN
+
+#define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+// #define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+// #define ENABLE_RGB_MATRIX_SPLASH
+// #define ENABLE_RGB_MATRIX_MULTISPLASH
+// #define ENABLE_RGB_MATRIX_SOLID_SPLASH
+// #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 0b1110100 AD <-> GND
+// 0b1110111 AD <-> VCC
+// 0b1110101 AD <-> SCL
+// 0b1110110 AD <-> SDA
+#define DRIVER_ADDR_1 0b1110100
+
+#define DRIVER_COUNT 1
+#define RGB_MATRIX_LED_COUNT 6
+#endif
+//#define RGB_DI_PIN B7
+//#ifdef RGB_DI_PIN
+//#define RGBLED_NUM 8
+//#define RGBLIGHT_HUE_STEP 5
+//#define RGBLIGHT_SAT_STEP 5
+//#define RGBLIGHT_VAL_STEP 5
+//#define RGBLIGHT_SLEEP
+//#endif
diff --git a/keyboards/smallkeyboard/smallkeyboard.c b/keyboards/smallkeyboard/smallkeyboard.c
new file mode 100644
index 0000000000..40cf3fc71a
--- /dev/null
+++ b/keyboards/smallkeyboard/smallkeyboard.c
@@ -0,0 +1,49 @@
+/* Copyright 2021 zhouqiong19840119
+  *
+  * This program is free software: you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation, either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+  */
+#include "smallkeyboard.h"
+
+#ifdef RGB_MATRIX_ENABLE
+
+const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = {
+    /* Refer to IS31 manual for these locations
+     *   driver
+     *   |  R location
+     *   |  |       G location
+     *   |  |       |       B location
+     *   |  |       |       | */
+    {0, C1_3, C2_3, C3_3},     // BL1
+    {0, C1_4, C2_4, C3_4},     // BL2
+    {0, C1_5, C2_5, C3_5},     // BL3
+    {0, C1_11, C2_11, C3_11},  // BL4
+    {0, C1_12, C2_12, C3_12},  // BL5
+    {0, C1_13, C2_13, C3_13},  // BL6
+};
+
+led_config_t g_led_config = {
+    {
+        { 0,      1,     2},
+        { 3,      4,     5},
+    },
+    {
+        { 48, 32},{ 48, 48},{ 64, 48},
+        { 80, 16},{ 64, 32},{ 80, 32}
+    },
+    {
+        4, 4, 4,
+        1, 1, 4
+    }
+};
+#endif