Remove non-Keychron keyboards

76 files changed, 0 insertions, 3739 deletions

diff --git a/keyboards/sawnsprojects/krush/krush60/readme.md b/keyboards/sawnsprojects/krush/krush60/readme.md
deleted file mode 100644
index 6890329c35..0000000000
--- a/keyboards/sawnsprojects/krush/krush60/readme.md
+++ /dev/null
@@ -1,25 +0,0 @@
-# Krush60
-
-A 60% keyboard sold in several variants. 
-
-1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "Krush60" with krush keyboard case. Compatible with some 60% case, Singa, Bakeneko.
-
- **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board.
-
-* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan)
-* Hardware Supported: Krush60, SINGA, Bakeneko, 60% traymount case
-* Hardware Availability: [Mechkey.store](https://mechkey.store/)
-
-Make examples for this keyboard (after setting up your build environment):
-
-    make sawnsprojects/krush/krush60/solder:default
-
-## Bootloader
-
-Enter the bootloader in 3 ways:
-
-* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
-* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/krush/krush60/solder/config.h b/keyboards/sawnsprojects/krush/krush60/solder/config.h
deleted file mode 100644
index 5e0614f58e..0000000000
--- a/keyboards/sawnsprojects/krush/krush60/solder/config.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* Copyright 2021 SawnsProjects
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 8
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B1, B2, D1, D2, D4, D6, F6, F7, F5, F4 }
-#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D5, D3 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-/* Caps Lock */
-#define LED_CAPS_LOCK_PIN F0
-#define LED_PIN_ON_STATE 0
-
-#define RGB_DI_PIN F1
-#ifdef RGB_DI_PIN
-    #define RGBLED_NUM 20
-    #define RGBLIGHT_HUE_STEP 8
-    #define RGBLIGHT_SAT_STEP 8
-    #define RGBLIGHT_VAL_STEP 8
-    #define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */
-    #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== all animations enable ==*/
-#define RGBLIGHT_EFFECT_BREATHING
-#define RGBLIGHT_EFFECT_RAINBOW_MOOD
-#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-#define RGBLIGHT_EFFECT_SNAKE
-#define RGBLIGHT_EFFECT_KNIGHT
-#define RGBLIGHT_EFFECT_CHRISTMAS
-#define RGBLIGHT_EFFECT_STATIC_GRADIENT
-#define RGBLIGHT_EFFECT_RGB_TEST
-#define RGBLIGHT_EFFECT_ALTERNATING
-#define RGBLIGHT_EFFECT_TWINKLE
-#endif
\ No newline at end of file
diff --git a/keyboards/sawnsprojects/krush/krush60/solder/info.json b/keyboards/sawnsprojects/krush/krush60/solder/info.json
deleted file mode 100644
index d3de2e9000..0000000000
--- a/keyboards/sawnsprojects/krush/krush60/solder/info.json
+++ /dev/null
@@ -1,1151 +0,0 @@
-{
-    "keyboard_name": "Krush60 - Solder",
-    "manufacturer": "SawnsProjects",
-    "url": "",
-    "maintainer": "MaiTheSan",
-    "usb": {
-        "vid": "0x5350",
-        "pid": "0x6B32",
-        "device_version": "0.0.1"
-    },
-    "layout_aliases": {
-        "LAYOUT_60_ansi_arrow_split_bs_7u_spc": "LAYOUT_60_ansi_arrow_tsangan_split_bs",
-        "LAYOUT_60_ansi_arrow_7u_spc": "LAYOUT_60_ansi_arrow_tsangan"
-    },
-    "layouts": {
-        "LAYOUT_all": {
-            "layout": [
-                {"x":0, "y":0},
-                {"x":1, "y":0},
-                {"x":2, "y":0},
-                {"x":3, "y":0},
-                {"x":4, "y":0},
-                {"x":5, "y":0},
-                {"x":6, "y":0},
-                {"x":7, "y":0},
-                {"x":8, "y":0},
-                {"x":9, "y":0},
-                {"x":10, "y":0},
-                {"x":11, "y":0},
-                {"x":12, "y":0},
-                {"x":13, "y":0},
-                {"x":14, "y":0},
-
-                {"x":0, "y":1, "w":1.5},
-                {"x":1.5, "y":1},
-                {"x":2.5, "y":1},
-                {"x":3.5, "y":1},
-                {"x":4.5, "y":1},
-                {"x":5.5, "y":1},
-                {"x":6.5, "y":1},
-                {"x":7.5, "y":1},
-                {"x":8.5, "y":1},
-                {"x":9.5, "y":1},
-                {"x":10.5, "y":1},
-                {"x":11.5, "y":1},
-                {"x":12.5, "y":1},
-                {"x":13.5, "y":1, "w":1.5},
-
-                {"x":0, "y":2, "w":1.75},
-                {"x":1.75, "y":2},
-                {"x":2.75, "y":2},
-                {"x":3.75, "y":2},
-                {"x":4.75, "y":2},
-                {"x":5.75, "y":2},
-                {"x":6.75, "y":2},
-                {"x":7.75, "y":2},
-                {"x":8.75, "y":2},
-                {"x":9.75, "y":2},
-                {"x":10.75, "y":2},
-                {"x":11.75, "y":2},
-                {"x":12.75, "y":2, "w":2.25},
-
-                {"x":0, "y":3, "w":2},
-                {"x":2, "y":3},
-                {"x":3, "y":3},
-                {"x":4, "y":3},
-                {"x":5, "y":3},
-                {"x":6, "y":3},
-                {"x":7, "y":3},
-                {"x":8, "y":3},
-                {"x":9, "y":3},
-                {"x":10, "y":3},
-                {"x":11, "y":3},
-                {"x":12, "y":3},
-                {"x":13, "y":3},
-                {"x":14, "y":3},
-
-                {"x":0, "y":4, "w":1.25},
-                {"x":1.25, "y":4, "w":1.25},
-                {"x":2.5, "y":4, "w":1.25},
-                {"x":3.75, "y":4, "w":2.25},
-                {"x":6, "y":4, "w":1.25},
-                {"x":7.25, "y":4, "w":2.75},
-                {"x":10, "y": 4},
-                {"x":11, "y": 4},
-                {"x":12, "y": 4},
-                {"x":13, "y": 4},
-                {"x":14, "y": 4}
-            ]
-        },
-        "LAYOUT_60_ansi": {
-            "layout": [
-                {"x":0, "y":0},
-                {"x":1, "y":0},
-                {"x":2, "y":0},
-                {"x":3, "y":0},
-                {"x":4, "y":0},
-                {"x":5, "y":0},
-                {"x":6, "y":0},
-                {"x":7, "y":0},
-                {"x":8, "y":0},
-                {"x":9, "y":0},
-                {"x":10, "y":0},
-                {"x":11, "y":0},
-                {"x":12, "y":0},
-                {"x":13, "y":0, "w":2},
-
-                {"x":0, "y":1, "w":1.5},
-                {"x":1.5, "y":1},
-                {"x":2.5, "y":1},
-                {"x":3.5, "y":1},
-                {"x":4.5, "y":1},
-                {"x":5.5, "y":1},
-                {"x":6.5, "y":1},
-                {"x":7.5, "y":1},
-                {"x":8.5, "y":1},
-                {"x":9.5, "y":1},
-                {"x":10.5, "y":1},
-                {"x":11.5, "y":1},
-                {"x":12.5, "y":1},
-                {"x":13.5, "y":1, "w":1.5},
-
-                {"x":0, "y":2, "w":1.75},
-                {"x":1.75, "y":2},
-                {"x":2.75, "y":2},
-                {"x":3.75, "y":2},
-                {"x":4.75, "y":2},
-                {"x":5.75, "y":2},
-                {"x":6.75, "y":2},
-                {"x":7.75, "y":2},
-                {"x":8.75, "y":2},
-                {"x":9.75, "y":2},
-                {"x":10.75, "y":2},
-                {"x":11.75, "y":2},
-                {"x":12.75, "y":2, "w":2.25},
-
-                {"x":0, "y":3, "w":2.25},
-                {"x":2.25, "y":3},
-                {"x":3.25, "y":3},
-                {"x":4.25, "y":3},
-                {"x":5.25, "y":3},
-                {"x":6.25, "y":3},
-                {"x":7.25, "y":3},
-                {"x":8.25, "y":3},
-                {"x":9.25, "y":3},
-                {"x":10.25, "y":3},
-                {"x":11.25, "y":3},
-                {"x":12.25, "y":3, "w":2.75},
-
-                {"x":0, "y":4, "w":1.25},
-                {"x":1.25, "y":4, "w":1.25},
-                {"x":2.5, "y":4, "w":1.25},
-                {"x":3.75, "y":4, "w":6.25},
-                {"x":10, "y":4, "w":1.25},
-                {"x":11.25, "y":4, "w":1.25},
-                {"x":12.5, "y":4, "w":1.25},
-                {"x":13.75, "y":4, "w":1.25}
-            ]
-        },
-        "LAYOUT_60_isoenter_split_bs": {
-            "layout": [
-                {"x":0, "y":0},
-                {"x":1, "y":0},
-                {"x":2, "y":0},
-                {"x":3, "y":0},
-                {"x":4, "y":0},
-                {"x":5, "y":0},
-                {"x":6, "y":0},
-                {"x":7, "y":0},
-                {"x":8, "y":0},
-                {"x":9, "y":0},
-                {"x":10, "y":0},
-                {"x":11, "y":0},
-                {"x":12, "y":0},
-                {"x":13, "y":0},
-                {"x":14, "y":0},
-
-                {"x":0, "y":1, "w":1.5},
-                {"x":1.5, "y":1},
-                {"x":2.5, "y":1},
-                {"x":3.5, "y":1},
-                {"x":4.5, "y":1},
-                {"x":5.5, "y":1},
-                {"x":6.5, "y":1},
-                {"x":7.5, "y":1},
-                {"x":8.5, "y":1},
-                {"x":9.5, "y":1},
-                {"x":10.5, "y":1},
-                {"x":11.5, "y":1},
-                {"x":12.5, "y":1},
-
-                {"x":0, "y":2, "w":1.75},
-                {"x":1.75, "y":2},
-                {"x":2.75, "y":2},
-                {"x":3.75, "y":2},
-                {"x":4.75, "y":2},
-                {"x":5.75, "y":2},
-                {"x":6.75, "y":2},
-                {"x":7.75, "y":2},
-                {"x":8.75, "y":2},
-                {"x":9.75, "y":2},
-                {"x":10.75, "y":2},
-                {"x":11.75, "y":2},
-                {"x":12.75, "y":2},
-                {"x":13.75, "y":1, "w":1.25, "h":2},
-
-                {"x": 0, "y": 3, "w": 2.25},
-                {"x":2.25, "y":3},
-                {"x":3.25, "y":3},
-                {"x":4.25, "y":3},
-                {"x":5.25, "y":3},
-                {"x":6.25, "y":3},
-                {"x":7.25, "y":3},
-                {"x":8.25, "y":3},
-                {"x":9.25, "y":3},
-                {"x":10.25, "y":3},
-                {"x":11.25, "y":3},
-                {"x":12.25, "y":3, "w":2.75},
-
-                {"x":0, "y":4, "w":1.25},
-                {"x":1.25, "y":4, "w":1.25},
-                {"x":2.5, "y":4, "w":1.25},
-                {"x":3.75, "y":4, "w":6.25},
-                {"x":10, "y":4, "w":1.25},
-                {"x":11.25, "y":4, "w":1.25},
-                {"x":12.5, "y":4, "w":1.25},
-                {"x":13.75, "y":4, "w":1.25}
-            ]
-        },
-        "LAYOUT_60_ansi_split_bs": {
-            "layout": [
-                {"x":0, "y": 0},
-                {"x":1, "y": 0},
-                {"x":2, "y": 0},
-                {"x":3, "y": 0},
-                {"x":4, "y": 0},
-                {"x":5, "y": 0},
-                {"x":6, "y": 0},
-                {"x":7, "y": 0},
-                {"x":8, "y": 0},
-                {"x":9, "y": 0},
-                {"x":10, "y": 0},
-                {"x":11, "y": 0},
-