[Keyboard] move @omkbd 's boards to /omkbd (#16116)

1 files changed, 0 insertions, 84 deletions

diff --git a/keyboards/runner3680/5x6_5x8/config.h b/keyboards/runner3680/5x6_5x8/config.h
deleted file mode 100644
index 815da24950..0000000000
--- a/keyboards/runner3680/5x6_5x8/config.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* Copyright 2021 omkbd
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0x3680
-#define PRODUCT_ID      0x5658
-#define DEVICE_VER      0x0005
-#define MANUFACTURER    Omkbd
-#define PRODUCT         runner3680
-
-/* key matrix size */
-// Rows are doubled-up
-#define MATRIX_ROWS 10
-#define MATRIX_COLS 8
-
-// wiring of each half
-#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 ,B6 }
-// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
-
-#define DIODE_DIRECTION COL2ROW
-
-/* define tapping term */
-#define TAPPING_TERM 120
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* ws2812 RGB LED */
-#define RGB_DI_PIN D3
-#ifdef RGBLIGHT_ENABLE
-#define RGBLIGHT_EFFECT_BREATHING
-#define RGBLIGHT_EFFECT_RAINBOW_MOOD
-#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-#define RGBLIGHT_EFFECT_SNAKE
-#define RGBLIGHT_EFFECT_KNIGHT
-#define RGBLIGHT_EFFECT_CHRISTMAS
-#define RGBLIGHT_EFFECT_STATIC_GRADIENT
-#define RGBLIGHT_EFFECT_RGB_TEST
-#define RGBLIGHT_EFFECT_ALTERNATING
-#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLED_NUM 70
-#define RGBLIGHT_SPLIT
-#define RGBLED_SPLIT { 30, 40 }    // Number of LEDs
-#define RGBLIGHT_LIMIT_VAL 100
-#endif
-#ifdef RGB_MATRIX_ENABLE
-#define DRIVER_LED_TOTAL 70
-#define RGB_MATRIX_SPLIT { 30, 40 }    // Number of LEDs
-#endif
-
-#define SOFT_SERIAL_PIN D2
-#define SELECT_SOFT_SERIAL_SPEED 1
-/*Sets the protocol speed when using serial communication*/
-//Speeds:
-//0: about 189kbps (Experimental only)
-//1: about 137kbps (default)
-//2: about 75kbps
-//3: about 39kbps
-//4: about 26kbps
-//5: about 20kbps