[Keyboard] Add keyboard Reviung34 (#6847)

9 files changed, 492 insertions, 0 deletions

diff --git a/keyboards/reviung34/config.h b/keyboards/reviung34/config.h
new file mode 100755
index 0000000000..5ebb631209
--- /dev/null
+++ b/keyboards/reviung34/config.h
@@ -0,0 +1,251 @@
+/*
+Copyright 2019 gtips
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    gtips
+#define PRODUCT         reviung34
+#define DESCRIPTION     A 34-key split keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 9
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F4, F5, F6, F7}
+#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B1, B3, B2, B6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/reviung34/info.json b/keyboards/reviung34/info.json
new file mode 100755
index 0000000000..e69de29bb2
--- /dev/null
+++ b/keyboards/reviung34/info.json
diff --git a/keyboards/reviung34/keymaps/default/config.h b/keyboards/reviung34/keymaps/default/config.h
new file mode 100755
index 0000000000..1924c64a1e
--- /dev/null
+++ b/keyboards/reviung34/keymaps/default/config.h
@@ -0,0 +1,20 @@
+/* Copyright 2019 gtips
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
+
diff --git a/keyboards/reviung34/keymaps/default/keymap.c b/keyboards/reviung34/keymaps/default/keymap.c
new file mode 100755
index 0000000000..4d497a76b7
--- /dev/null
+++ b/keyboards/reviung34/keymaps/default/keymap.c
@@ -0,0 +1,67 @@
+/* Copyright 2019 gtips
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    _BASE,
+    _LOWER,
+    _RAISE,
+    _ADJUST
+};
+
+#define LOWER  MO(_LOWER)
+#define RAISE  MO(_RAISE)
+
+#define CT_TB LCTL_T(KC_TAB)
+#define CT_Q  LCTL_T(KC_Q)
+#define SF_Z  LSFT_T(KC_Z)
+#define SF_SS RSFT_T(KC_SLSH)
+#define AL_X  LALT_T(KC_X)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_reviung34(
+    CT_Q,     KC_W,     KC_E,     KC_R,     KC_T,               KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,
+    KC_A,     KC_S,     KC_D,     KC_F,     KC_G,               KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,
+    SF_Z,     AL_X,     KC_C,     KC_V,     KC_B,               KC_N,     KC_M,     KC_COMM,  KC_DOT,   SF_SS,
+                        CT_TB,    LOWER,    RAISE,              KC_SPC
+  ),
+  
+  [_LOWER] = LAYOUT_reviung34(
+    KC_EXLM,  KC_AT,    KC_HASH,  KC_DLR,   KC_PERC,            KC_CIRC,  KC_AMPR,  KC_ASTR,  KC_LPRN,  KC_RPRN,
+    KC_UNDS,  KC_PLUS,  KC_LCBR,  KC_RCBR,  KC_PIPE,            KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  KC_QUOT,
+    KC_LSFT,  KC_ESC,   KC_LGUI,  KC_LALT,  KC_CAPS,            KC_HOME,  KC_END,   KC_PGUP,  KC_PGDN,  KC_DEL,
+                        _______,  _______,  _______,            KC_BSPC
+  ),
+	
+	[_RAISE] = LAYOUT_reviung34(
+    KC_1,     KC_2,     KC_3,     KC_4,     KC_5,               KC_6,     KC_7,     KC_8,     KC_9,     KC_0,
+    KC_MINS,  KC_EQL,   KC_LBRC,  KC_RBRC,  KC_BSLS,            XXXXXXX,  XXXXXXX,  KC_GRV,   KC_TILD,  KC_DQUO,
+    KC_LSFT,  KC_ESC,   KC_RGUI,  KC_LALT,  KC_CAPS,            KC_TAB,   KC_RALT,  KC_RCTL,  KC_RSFT,  KC_BSPC,
+                        _______,  _______,  _______,            KC_ENT
+  ),
+  
+  [_ADJUST] = LAYOUT_reviung34(
+    KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,              XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,
+    KC_F7,    KC_F7,    KC_F8,    KC_F9,    KC_F10,             XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,
+    KC_F11,   KC_F12,   XXXXXXX,  XXXXXXX,  KC_PSCR,            RESET,    XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,
+                        _______,  _______,  _______,            XXXXXXX
+  ),
+};
+
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
diff --git a/keyboards/reviung34/keymaps/default/readme.md b/keyboards/reviung34/keymaps/default/readme.md
new file mode 100755
index 0000000000..2e4619fae8
--- /dev/null
+++ b/keyboards/reviung34/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for reviung34
diff --git a/keyboards/reviung34/readme.md b/keyboards/reviung34/readme.md
new file mode 100755
index 0000000000..48b054cf94
--- /dev/null
+++ b/keyboards/reviung34/readme.md
@@ -0,0 +1,18 @@
+# reviung34
+
+![REVIUNG34 SPLIT](https://github.com/gtips/reviung/blob/master/reviung34split/image/REVIUNG34.jpg)  
+
+The REVIUNG34 SPLIT is 34-key split ortholinear keyboard.  
+Use one ProMicro.  
+And connect the left and right keyboards using a LAN cable.  
+
+Keyboard Maintainer: [gtips](https://github.com/gtips)  
+Hardware Supported: The REVIUNG34 PCBs, Pro Micro supported  
+Hardware Availability: [PCB & Case Data](https://github.com/gtips/reviung/tree/master/reviung34split)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make reviung34:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
diff --git a/keyboards/reviung34/reviung34.c b/keyboards/reviung34/reviung34.c
new file mode 100755
index 0000000000..9a10f96f56
--- /dev/null
+++ b/keyboards/reviung34/reviung34.c
@@ -0,0 +1,51 @@
+/* Copyright 2019 gtips
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "reviung34.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+
+void matrix_init_kb(void) {
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+
+  matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+
+  matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  // put your per-action keyboard code here
+  // runs for every action, just before processing by the firmware
+
+  return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+  led_set_user(usb_led);
+}
+
+*/
diff --git a/keyboards/reviung34/reviung34.h b/keyboards/reviung34/reviung34.h
new file mode 100755
index 0000000000..ccf9762f7b
--- /dev/null
+++ b/keyboards/reviung34/reviung34.h
@@ -0,0 +1,39 @@
+/* Copyright 2019 gtips
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_reviung34( \
+    K00, K01, K02, K03, K04,     K05, K06, K07, K08, K35, \
+    K10, K11, K12, K13, K14,     K15, K16, K17, K18, K36, \
+    K20, K21, K22, K23, K24,     K25, K26, K27, K28, K37, \
+              K32, K33, K34,     K38 \
+) \
+{ \
+    { K00,   K01,   K02, K03, K04, K05, K06, K07, K08 }, \
+    { K10,   K11,   K12, K13, K14, K15, K16, K17, K18 }, \
+    { K20,   K21,   K22, K23, K24, K25, K26, K27, K28 }, \
+    { KC_NO, KC_NO, K32, K33, K34, K35, K36, K37, K38 } \
+}
diff --git a/keyboards/reviung34/rules.mk b/keyboards/reviung34/rules.mk
new file mode 100755
index 0000000000..7c3d5f3917
--- /dev/null
+++ b/keyboards/reviung34/rules.mk
@@ -0,0 +1,45 @@
+# MCU name
+MCU = atmega32u4
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+