Adds support for Planck Rev 6 (#2666)

* initial files for rev 6 with encoder

* music map init, dip scan added

* adds ws2812 driver for arm

* flesh out dip and encoder support

* adds default encoder res

* adds default encoder res

* start muse implementation

* muse working with encoder as control

* flip direction

* try mouse wheel again

* dont break other revs

* dont break other revs

* conditional autio

* pwm ws driver (not working)

* update build includes for chibios

* update ws2812 driver/config

* last commit for glasser code

* working example

* remove rgb for now

* finish up rev6

* working encoder keycodes

* add warnings to planck keymaps about the LAYOUT

1 files changed, 138 insertions, 0 deletions

diff --git a/keyboards/planck/rev6/config.h b/keyboards/planck/rev6/config.h
new file mode 100644
index 0000000000..0e462180bd
--- /dev/null
+++ b/keyboards/planck/rev6/config.h
@@ -0,0 +1,138 @@
+/*
+ * Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef REV6_CONFIG_H
+#define REV6_CONFIG_H
+
+/* USB Device descriptor parameter */
+#define DEVICE_VER 0x0006
+
+#undef MATRIX_ROWS
+#undef MATRIX_COLS
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+/* Note: These are not used for arm boards. They're here purely as documentation.
+ * #define MATRIX_ROW_PINS { PB0, PB1, PB2, PA15, PA10 }
+ * #define MATRIX_COL_PINS { PA2, PA3, PA6, PB14, PB15, PA8, PA9, PA7, PB3, PB4, PC14, PC15, PC13, PB5, PB6 }
+ * #define UNUSED_PINS
+ */
+
+#define MUSIC_MAP
+#undef AUDIO_VOICES
+#undef C6_AUDIO
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 6
+
+/* Prevent modifiers from being stuck on after layer changes. */
+#define PREVENT_STUCK_MODIFIERS
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+	keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+#define WS2812_LED_N 2
+#define RGBLED_NUM WS2812_LED_N
+#define WS2812_TIM_N 2
+#define WS2812_TIM_CH 2
+#define PORT_WS2812     GPIOA
+#define PIN_WS2812      1
+#define WS2812_DMA_STREAM STM32_DMA1_STREAM2  // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
+//#define WS2812_DMA_CHANNEL 7                  // DMA channel for TIMx_UP
+//#define WS2812_EXTERNAL_PULLUP
+
+#endif