[Keyboard] Oddball keyboard (#8352)

* Initial commit of oddball keyboard

* Update oddball project url

* Update pointer functions to only run on master side

* Add unique product version

* Capitalise product name

* Convert oddball keymap layer flags to enum

* Remove commented keyboard boilerplate code

* Remove unused keymap config

* Fix incorrect layout in info.json

* Add markdown link text in readme

1 files changed, 270 insertions, 0 deletions

diff --git a/keyboards/oddball/adns.c b/keyboards/oddball/adns.c
new file mode 100644
index 0000000000..35225f042b
--- /dev/null
+++ b/keyboards/oddball/adns.c
@@ -0,0 +1,270 @@
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include "quantum.h"
+#include "pointing_device.h"
+#include "adns9800_srom_A4.h"
+#include "../../lib/lufa/LUFA/Drivers/Peripheral/SPI.h"
+
+// registers
+#define REG_Product_ID                           0x00
+#define REG_Revision_ID                          0x01
+#define REG_Motion                               0x02
+#define REG_Delta_X_L                            0x03
+#define REG_Delta_X_H                            0x04
+#define REG_Delta_Y_L                            0x05
+#define REG_Delta_Y_H                            0x06
+#define REG_SQUAL                                0x07
+#define REG_Pixel_Sum                            0x08
+#define REG_Maximum_Pixel                        0x09
+#define REG_Minimum_Pixel                        0x0a
+#define REG_Shutter_Lower                        0x0b
+#define REG_Shutter_Upper                        0x0c
+#define REG_Frame_Period_Lower                   0x0d
+#define REG_Frame_Period_Upper                   0x0e
+#define REG_Configuration_I                      0x0f
+#define REG_Configuration_II                     0x10
+#define REG_Frame_Capture                        0x12
+#define REG_SROM_Enable                          0x13
+#define REG_Run_Downshift                        0x14
+#define REG_Rest1_Rate                           0x15
+#define REG_Rest1_Downshift                      0x16
+#define REG_Rest2_Rate                           0x17
+#define REG_Rest2_Downshift                      0x18
+#define REG_Rest3_Rate                           0x19
+#define REG_Frame_Period_Max_Bound_Lower         0x1a
+#define REG_Frame_Period_Max_Bound_Upper         0x1b
+#define REG_Frame_Period_Min_Bound_Lower         0x1c
+#define REG_Frame_Period_Min_Bound_Upper         0x1d
+#define REG_Shutter_Max_Bound_Lower              0x1e
+#define REG_Shutter_Max_Bound_Upper              0x1f
+#define REG_LASER_CTRL0                          0x20
+#define REG_Observation                          0x24
+#define REG_Data_Out_Lower                       0x25
+#define REG_Data_Out_Upper                       0x26
+#define REG_SROM_ID                              0x2a
+#define REG_Lift_Detection_Thr                   0x2e
+#define REG_Configuration_V                      0x2f
+#define REG_Configuration_IV                     0x39
+#define REG_Power_Up_Reset                       0x3a
+#define REG_Shutdown                             0x3b
+#define REG_Inverse_Product_ID                   0x3f
+#define REG_Motion_Burst                         0x50
+#define REG_SROM_Load_Burst                      0x62
+#define REG_Pixel_Burst                          0x64
+
+// pins
+#define NCS 0
+
+extern const uint16_t firmware_length;
+extern const uint8_t firmware_data[];
+
+enum motion_burst_property{
+    motion = 0,
+    observation,
+    delta_x_l,
+    delta_x_h,
+    delta_y_l,
+    delta_y_h,
+    squal,
+    pixel_sum,
+    maximum_pixel,
+    minimum_pixel,
+    shutter_upper,
+    shutter_lower,
+    frame_period_upper,
+    frame_period_lower,
+    end_data
+};
+
+// used to track the motion delta between updates
+volatile int32_t delta_x;
+volatile int32_t delta_y;
+
+void adns_begin(void){
+    PORTB &= ~ (1 << NCS);
+}
+
+void adns_end(void){
+    PORTB |= (1 << NCS);
+}
+
+void adns_write(uint8_t reg_addr, uint8_t data){
+
+    adns_begin();
+
+    //send address of the register, with MSBit = 1 to indicate it's a write
+    SPI_TransferByte(reg_addr | 0x80 );
+    SPI_TransferByte(data);
+
+    // tSCLK-NCS for write operation
+    wait_us(20);
+
+    adns_end();
+
+    // tSWW/tSWR (=120us) minus tSCLK-NCS. Could be shortened, but is looks like a safe lower bound
+    wait_us(100);
+}
+
+uint8_t adns_read(uint8_t reg_addr){
+
+    adns_begin();
+
+    // send adress of the register, with MSBit = 0 to indicate it's a read
+    SPI_TransferByte(reg_addr & 0x7f );
+    uint8_t data = SPI_TransferByte(0);
+
+    // tSCLK-NCS for read operation is 120ns
+    wait_us(1);
+
+    adns_end();
+
+    //  tSRW/tSRR (=20us) minus tSCLK-NCS
+    wait_us(19);
+
+    return data;
+}
+
+void pointing_device_init(void) {
+
+    if(!is_keyboard_master())
+        return;
+
+    // interrupt 2
+    EICRA &= ~(1 << 4);
+    EICRA |= (1 << 5);
+    EIMSK |= (1<<INT2);
+
+    // mode 3
+    SPI_Init(
+        SPI_SPEED_FCPU_DIV_8 |
+        SPI_ORDER_MSB_FIRST |
+        SPI_SCK_LEAD_FALLING |
+        SPI_SAMPLE_TRAILING |
+        SPI_MODE_MASTER);
+
+    // set B0 output
+    DDRB |= (1 << 0);
+
+    // reset serial port
+    adns_end();
+    adns_begin();
+    adns_end();
+
+    // reboot
+    adns_write(REG_Power_Up_Reset, 0x5a);
+    wait_ms(50);
+
+    // read registers and discard
+    adns_read(REG_Motion);
+    adns_read(REG_Delta_X_L);
+    adns_read(REG_Delta_X_H);
+    adns_read(REG_Delta_Y_L);
+    adns_read(REG_Delta_Y_H);
+
+    // upload firmware
+
+    // set the configuration_IV register in 3k firmware mode
+    // bit 1 = 1 for 3k mode, other bits are reserved
+    adns_write(REG_Configuration_IV, 0x02);
+
+    // write 0x1d in SROM_enable reg for initializing
+    adns_write(REG_SROM_Enable, 0x1d);
+
+    // wait for more than one frame period
+    // assume that the frame rate is as low as 100fps... even if it should never be that low
+    wait_ms(10);
+
+    // write 0x18 to SROM_enable to start SROM download
+    adns_write(REG_SROM_Enable, 0x18);
+
+    // write the SROM file (=firmware data)
+    adns_begin();
+
+    // write burst destination adress
+    SPI_TransferByte(REG_SROM_Load_Burst | 0x80);
+    wait_us(15);
+
+    // send all bytes of the firmware
+    unsigned char c;
+    for(int i = 0; i < firmware_length; i++){
+        c = (unsigned char)pgm_read_byte(firmware_data + i);
+        SPI_TransferByte(c);
+        wait_us(15);
+    }
+
+    adns_end();
+
+    wait_ms(10);
+
+    // enable laser(bit 0 = 0b), in normal mode (bits 3,2,1 = 000b)
+    // reading the actual value of the register is important because the real
+    // default value is different from what is said in the datasheet, and if you
+    // change the reserved bytes (like by writing 0x00...) it would not work.
+    uint8_t laser_ctrl0 = adns_read(REG_LASER_CTRL0);
+    adns_write(REG_LASER_CTRL0, laser_ctrl0 & 0xf0);
+
+    wait_ms(1);
+
+    // set the configuration_I register to set the CPI
+    // 0x01 = 50, minimum
+    // 0x44 = 3400, default
+    // 0x8e = 7100
+    // 0xA4 = 8200, maximum
+    adns_write(REG_Configuration_I, 0x04);
+
+    wait_ms(100);
+}
+
+void pointing_device_task(void) {
+
+    if(!is_keyboard_master())
+        return;
+
+    report_mouse_t report = pointing_device_get_report();
+
+    // clamp deltas from -127 to 127
+    report.x = delta_x < -127 ? 127 : delta_x > 127 ? 127 : delta_x;
+    report.x = -report.x;
+
+    report.y = delta_y < -127 ? 127 : delta_y > 127 ? 127 : delta_y;
+
+    // reset deltas
+    delta_x = 0;
+    delta_y = 0;
+
+    pointing_device_set_report(report);
+    pointing_device_send();
+}
+
+int16_t convertDeltaToInt(uint8_t high, uint8_t low){
+
+    // join bytes into twos compliment
+    uint16_t twos_comp = (high << 8) | low;
+
+    // convert twos comp to int
+    if (twos_comp & 0x8000)
+        return -1 * ((twos_comp ^ 0xffff) + 1);
+
+    return twos_comp;
+}
+
+ISR(INT2_vect) {
+    // called on interrupt 2 when sensed motion
+    // copy burst data from the respective registers
+
+    adns_begin();
+
+    // send adress of the register, with MSBit = 1 to indicate it's a write
+    SPI_TransferByte(REG_Motion_Burst & 0x7f);
+
+    uint8_t burst_data[pixel_sum];
+
+    for (int i = 0; i < pixel_sum; ++i) {
+        burst_data[i] = SPI_TransferByte(0);
+    }
+
+    delta_x += convertDeltaToInt(burst_data[delta_x_h], burst_data[delta_x_l]);
+    delta_y += convertDeltaToInt(burst_data[delta_y_h], burst_data[delta_y_l]);
+
+    adns_end();
+}