Merge remote-tracking branch 'upstream/master'

1 files changed, 0 insertions, 362 deletions

diff --git a/keyboards/nyquist/pro_micro.h b/keyboards/nyquist/pro_micro.h
deleted file mode 100644
index f9e7ed75d9..0000000000
--- a/keyboards/nyquist/pro_micro.h
+++ /dev/null
@@ -1,362 +0,0 @@
-/*
-  pins_arduino.h - Pin definition functions for Arduino
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2007 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
-*/
-
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <avr/pgmspace.h>
-
-// Workaround for wrong definitions in "iom32u4.h".
-// This should be fixed in the AVR toolchain.
-#undef UHCON
-#undef UHINT
-#undef UHIEN
-#undef UHADDR
-#undef UHFNUM
-#undef UHFNUML
-#undef UHFNUMH
-#undef UHFLEN
-#undef UPINRQX
-#undef UPINTX
-#undef UPNUM
-#undef UPRST
-#undef UPCONX
-#undef UPCFG0X
-#undef UPCFG1X
-#undef UPSTAX
-#undef UPCFG2X
-#undef UPIENX
-#undef UPDATX
-#undef TCCR2A
-#undef WGM20
-#undef WGM21
-#undef COM2B0
-#undef COM2B1
-#undef COM2A0
-#undef COM2A1
-#undef TCCR2B
-#undef CS20
-#undef CS21
-#undef CS22
-#undef WGM22
-#undef FOC2B
-#undef FOC2A
-#undef TCNT2
-#undef TCNT2_0
-#undef TCNT2_1
-#undef TCNT2_2
-#undef TCNT2_3
-#undef TCNT2_4
-#undef TCNT2_5
-#undef TCNT2_6
-#undef TCNT2_7
-#undef OCR2A
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-#undef OCR2B
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-
-#define NUM_DIGITAL_PINS  30
-#define NUM_ANALOG_INPUTS 12
-
-#define TX_RX_LED_INIT  DDRD |= (1<<5), DDRB |= (1<<0)
-#define TXLED0          PORTD |= (1<<5)
-#define TXLED1          PORTD &= ~(1<<5)
-#define RXLED0          PORTB |= (1<<0)
-#define RXLED1          PORTB &= ~(1<<0)
-
-static const uint8_t SDA = 2;
-static const uint8_t SCL = 3;
-#define LED_BUILTIN 13
-
-// Map SPI port to 'new' pins D14..D17
-static const uint8_t SS   = 17;
-static const uint8_t MOSI = 16;
-static const uint8_t MISO = 14;
-static const uint8_t SCK  = 15;
-
-// Mapping of analog pins as digital I/O
-// A6-A11 share with digital pins
-static const uint8_t ADC0 = 18;
-static const uint8_t ADC1 = 19;
-static const uint8_t ADC2 = 20;
-static const uint8_t ADC3 = 21;
-static const uint8_t ADC4 = 22;
-static const uint8_t ADC5 = 23;
-static const uint8_t ADC6 = 24;   // D4
-static const uint8_t ADC7 = 25;   // D6
-static const uint8_t ADC8 = 26;   // D8
-static const uint8_t ADC9 = 27;   // D9
-static const uint8_t ADC10 = 28;  // D10
-static const uint8_t ADC11 = 29;  // D12
-
-#define digitalPinToPCICR(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
-#define digitalPinToPCICRbit(p) 0
-#define digitalPinToPCMSK(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
-#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
-
-//  __AVR_ATmega32U4__ has an unusual mapping of pins to channels
-extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
-#define analogPinToChannel(P)  ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
-
-#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
-
-#ifdef ARDUINO_MAIN
-
-// On the Arduino board, digital pins are also used
-// for the analog output (software PWM).  Analog input
-// pins are a separate set.
-
-// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
-//
-// D0               PD2                 RXD1/INT2
-// D1               PD3                 TXD1/INT3
-// D2               PD1     SDA         SDA/INT1
-// D3#              PD0     PWM8/SCL    OC0B/SCL/INT0
-// D4       A6      PD4                 ADC8
-// D5#              PC6     ???         OC3A/#OC4A
-// D6#      A7      PD7     FastPWM     #OC4D/ADC10
-// D7               PE6                 INT6/AIN0
-//
-// D8       A8      PB4                 ADC11/PCINT4
-// D9#      A9      PB5     PWM16       OC1A/#OC4B/ADC12/PCINT5
-// D10#     A10     PB6     PWM16       OC1B/0c4B/ADC13/PCINT6
-// D11#             PB7     PWM8/16     0C0A/OC1C/#RTS/PCINT7
-// D12      A11     PD6                 T1/#OC4D/ADC9
-// D13#             PC7     PWM10       CLK0/OC4A
-//
-// A0       D18     PF7                 ADC7
-// A1       D19     PF6                 ADC6
-// A2       D20     PF5                 ADC5
-// A3       D21     PF4                 ADC4
-// A4       D22     PF1                 ADC1
-// A5       D23     PF0                 ADC0
-//
-// New pins D14..D17 to map SPI port to digital pins
-//
-// MISO     D14     PB3                 MISO,PCINT3
-// SCK      D15     PB1                 SCK,PCINT1
-// MOSI     D16     PB2                 MOSI,PCINT2
-// SS       D17     PB0                 RXLED,SS/PCINT0
-//
-// Connected LEDs on board for TX and RX
-// TXLED    D24     PD5                 XCK1
-// RXLED    D17     PB0
-// HWB              PE2                 HWB
-
-// these arrays map port names (e.g. port B) to the
-// appropriate addresses for various functions (e.g. reading
-// and writing)
-const uint16_t PROGMEM port_to_mode_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &DDRB,
-    (uint16_t) &DDRC,
-    (uint16_t) &DDRD,
-    (uint16_t) &DDRE,
-    (uint16_t) &DDRF,
-};
-
-const uint16_t PROGMEM port_to_output_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PORTB,
-    (uint16_t) &PORTC,
-    (uint16_t) &PORTD,
-    (uint16_t) &PORTE,
-    (uint16_t) &PORTF,
-};
-
-const uint16_t PROGMEM port_to_input_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PINB,
-    (uint16_t) &PINC,
-    (uint16_t) &PIND,
-    (uint16_t) &PINE,
-    (uint16_t) &PINF,
-};
-
-const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
-    PD, // D0 - PD2
-    PD, // D1 - PD3
-    PD, // D2 - PD1
-    PD, // D3 - PD0
-    PD, // D4 - PD4
-    PC, // D5 - PC6
-    PD, // D6 - PD7
-    PE, // D7 - PE6
-
-    PB, // D8 - PB4
-    PB, // D9 - PB5
-    PB, // D10 - PB6
-    PB, // D11 - PB7
-    PD, // D12 - PD6
-    PC, // D13 - PC7
-
-    PB, // D14 - MISO - PB3
-    PB, // D15 - SCK - PB1
-    PB, // D16 - MOSI - PB2
-    PB, // D17 - SS - PB0
-
-    PF, // D18 - A0 - PF7
-    PF, // D19 - A1 - PF6
-    PF, // D20 - A2 - PF5
-    PF, // D21 - A3 - PF4
-    PF, // D22 - A4 - PF1
-    PF, // D23 - A5 - PF0
-
-    PD, // D24 - PD5
-    PD, // D25 / D6 - A7 - PD7
-    PB, // D26 / D8 - A8 - PB4
-    PB, // D27 / D9 - A9 - PB5
-    PB, // D28 / D10 - A10 - PB6
-    PD, // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
-    _BV(2), // D0 - PD2
-    _BV(3), // D1 - PD3
-    _BV(1), // D2 - PD1
-    _BV(0), // D3 - PD0
-    _BV(4), // D4 - PD4
-    _BV(6), // D5 - PC6
-    _BV(7), // D6 - PD7
-    _BV(6), // D7 - PE6
-
-    _BV(4), // D8 - PB4
-    _BV(5), // D9 - PB5
-    _BV(6), // D10 - PB6
-    _BV(7), // D11 - PB7
-    _BV(6), // D12 - PD6
-    _BV(7), // D13 - PC7
-
-    _BV(3), // D14 - MISO - PB3
-    _BV(1), // D15 - SCK - PB1
-    _BV(2), // D16 - MOSI - PB2
-    _BV(0), // D17 - SS - PB0
-
-    _BV(7), // D18 - A0 - PF7
-    _BV(6), // D19 - A1 - PF6
-    _BV(5), // D20 - A2 - PF5
-    _BV(4), // D21 - A3 - PF4
-    _BV(1), // D22 - A4 - PF1
-    _BV(0), // D23 - A5 - PF0
-
-    _BV(5), // D24 - PD5
-    _BV(7), // D25 / D6 - A7 - PD7
-    _BV(4), // D26 / D8 - A8 - PB4
-    _BV(5), // D27 / D9 - A9 - PB5
-    _BV(6), // D28 / D10 - A10 - PB6
-    _BV(6), // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    TIMER0B,        /* 3 */
-    NOT_ON_TIMER,
-    TIMER3A,        /* 5 */
-    TIMER4D,        /* 6 */
-    NOT_ON_TIMER,
-
-    NOT_ON_TIMER,
-    TIMER1A,        /* 9 */
-    TIMER1B,        /* 10 */
-    TIMER0A,        /* 11 */
-
-    NOT_ON_TIMER,
-    TIMER4A,        /* 13 */
-
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-};
-
-const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
-    7,  // A0               PF7                 ADC7
-    6,  // A1               PF6                 ADC6
-    5,  // A2               PF5                 ADC5
-    4,  // A3               PF4                 ADC4
-    1,  // A4               PF1                 ADC1
-    0,  // A5               PF0                 ADC0
-    8,  // A6       D4      PD4                 ADC8
-    10, // A7       D6      PD7                 ADC10
-    11, // A8       D8      PB4                 ADC11
-    12, // A9       D9      PB5                 ADC12
-    13, // A10      D10     PB6                 ADC13
-    9   // A11      D12     PD6                 ADC9
-};
-
-#endif /* ARDUINO_MAIN */
-
-// These serial port names are intended to allow libraries and architecture-neutral
-// sketches to automatically default to the correct port name for a particular type
-// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
-// the first hardware serial port whose RX/TX pins are not dedicated to another use.
-//
-// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
-//
-// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
-//
-// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
-//
-// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
-//
-// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
-//                            pins are NOT connected to anything by default.
-#define SERIAL_PORT_MONITOR        Serial
-#define SERIAL_PORT_USBVIRTUAL     Serial
-#define SERIAL_PORT_HARDWARE       Serial1
-#define SERIAL_PORT_HARDWARE_OPEN  Serial1
-
-#endif /* Pins_Arduino_h */