Remove non-Keychron keyboards

8 files changed, 0 insertions, 388 deletions

diff --git a/keyboards/momoka_ergo/config.h b/keyboards/momoka_ergo/config.h
deleted file mode 100644
index e480581220..0000000000
--- a/keyboards/momoka_ergo/config.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
-Copyright 2021 StefanGrindelwald
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 14
-#define MATRIX_COLS 6
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5, B6, B7 }
-#define MATRIX_COL_PINS { F7, F6, F5, F4, F1, F0 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-#define SELECT_SOFT_SERIAL_SPEED 5
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D1  // or D1, D2, D3, E6
-
-#define RGB_DI_PIN C7
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 22
-#define RGBLED_SPLIT { 11, 11 }
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 3	
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0	
-
-#define USE_SERIAL
-#define SPLIT_USB_DETECT
-#define EE_HANDS
diff --git a/keyboards/momoka_ergo/info.json b/keyboards/momoka_ergo/info.json
deleted file mode 100644
index c4d6cf38d7..0000000000
--- a/keyboards/momoka_ergo/info.json
+++ /dev/null
@@ -1,94 +0,0 @@
-{
-    "keyboard_name": "Momoka Ergo", 
-    "manufacturer": "StefanGrindelwald",
-    "url": "", 
-    "maintainer": "StefanGrindelwald", 
-    "usb": {
-        "vid": "0xFEED",
-        "pid": "0x0000",
-        "device_version": "0.0.1"
-    },
-    "layouts": {
-        "LAYOUT": {
-            "layout": [
-                {"label":"L05", "x":0, "y":0.375, "w":1.5},
-                {"label":"L04", "x":1.5, "y":0.375},
-                {"label":"L03", "x":2.5, "y":0.125},
-                {"label":"L02", "x":3.5, "y":0},
-                {"label":"L01", "x":4.5, "y":0.125},
-                {"label":"L00", "x":5.5, "y":0.25},
-                {"label":"R70", "x":12.5, "y":0.25},
-                {"label":"R71", "x":13.5, "y":0.125},
-                {"label":"R72", "x":14.5, "y":0},
-                {"label":"R73", "x":15.5, "y":0.125},
-                {"label":"R74", "x":16.5, "y":0.375},
-                {"label":"R75", "x":17.5, "y":0.375, "w":1.5},
-
-                {"label":"L15", "x":0, "y":1.375, "w":1.5},
-                {"label":"L14", "x":1.5, "y":1.375},
-                {"label":"L13", "x":2.5, "y":1.125},
-                {"label":"L12", "x":3.5, "y":1},
-                {"label":"L11", "x":4.5, "y":1.125},
-                {"label":"L10", "x":5.5, "y":1.25},
-                {"label":"R80", "x":12.5, "y":1.25},
-                {"label":"R81", "x":13.5, "y":1.125},
-                {"label":"R82", "x":14.5, "y":1},
-                {"label":"R83", "x":15.5, "y":1.125},
-                {"label":"R84", "x":16.5, "y":1.375},
-                {"label":"R85", "x":17.5, "y":1.375, "w":1.5},
-
-                {"label":"L25", "x":0, "y":2.375, "w":1.5},
-                {"label":"L24", "x":1.5, "y":2.375},
-                {"label":"L23", "x":2.5, "y":2.125},
-                {"label":"L22", "x":3.5, "y":2},
-                {"label":"L21", "x":4.5, "y":2.125},
-                {"label":"L20", "x":5.5, "y":2.25},
-                {"label":"R90", "x":12.5, "y":2.25},
-                {"label":"R91", "x":13.5, "y":2.125},
-                {"label":"R92", "x":14.5, "y":2},
-                {"label":"R93", "x":15.5, "y":2.125},
-                {"label":"R94", "x":16.5, "y":2.375},
-                {"label":"R95", "x":17.5, "y":2.375, "w":1.5},
-
-                {"label":"L35", "x":0, "y":3.375, "w":1.5},
-                {"label":"L34", "x":1.5, "y":3.375},
-                {"label":"L33", "x":2.5, "y":3.125},
-                {"label":"L32", "x":3.5, "y":3},
-                {"label":"L31", "x":4.5, "y":3.125},
-                {"label":"L30", "x":5.5, "y":3.25},
-                {"label":"RA0", "x":12.5, "y":3.25},
-                {"label":"RA1", "x":13.5, "y":3.125},
-                {"label":"RA2", "x":14.5, "y":3},
-                {"label":"RA3", "x":15.5, "y":3.125},
-                {"label":"RA4", "x":16.5, "y":3.375},
-                {"label":"RA5", "x":17.5, "y":3.375, "w":1.5},
-
-                {"label":"L45", "x":0.5, "y":4.375},
-                {"label":"L44", "x":1.5, "y":4.375},
-                {"label":"L43", "x":2.5, "y":4.125},
-                {"label":"L42", "x":3.5, "y":4},
-                {"label":"L41", "x":4.5, "y":4.125},
-                {"label":"RB1", "x":13.5, "y":4.125},
-                {"label":"RB2", "x":14.5, "y":4},
-                {"label":"RB3", "x":15.5, "y":4.125},
-                {"label":"RB4", "x":16.5, "y":4.375},
-                {"label":"RB5", "x":17.5, "y":4.375},
-
-                {"label":"L51", "x":7, "y":4.875},
-                {"label":"L40", "x":8, "y":4.875},
-                {"label":"RB0", "x":10, "y":4.875},
-                {"label":"RC1", "x":11, "y":4.875},
-
-                {"label":"L50", "x":8, "y":5.875},
-                {"label":"RC0", "x":10, "y":5.875},
-
-                {"label":"L52", "x":6, "y":5.875, "h":2},
-                {"label":"L61", "x":7, "y":5.875, "h":2},
-                {"label":"L60", "x":8, "y":6.875},
-                {"label":"RD0", "x":10, "y":6.875},
-                {"label":"RD1", "x":11, "y":5.875, "h":2},
-                {"label":"RC2", "x":12, "y":5.875, "h":2}
-            ]
-        }
-    }
-}
diff --git a/keyboards/momoka_ergo/keymaps/default/keymap.c b/keyboards/momoka_ergo/keymaps/default/keymap.c
deleted file mode 100644
index 45faae63ba..0000000000
--- a/keyboards/momoka_ergo/keymaps/default/keymap.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/* Copyright 2021 StefanGrindelwald
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-// Defines names for use in layer keycodes and the keymap
-enum layer_names {
-    _BASE,
-    _FN1,
-    _FN2
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* Base */
-    [_BASE] = LAYOUT(
-        KC_ESC,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                                           KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,
-        KC_TAB,   KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                                           KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS,
-        KC_CAPS,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                                           KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
-        KC_LSFT,  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                                           KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
-        MO(_FN1), KC_GRV,  KC_EQL,  KC_LEFT, KC_RGHT,                                                          KC_UP,   KC_DOWN, KC_LBRC, KC_RBRC, MO(_FN1),
-                                                               KC_LCTL, KC_LALT,    KC_RGUI, KC_RCTL,
-                                                                        KC_HOME,    KC_PGUP,
-                                                      KC_BSPC, KC_DEL,  KC_END,     KC_PGDN, KC_ENT,  KC_SPC
-    ),
-    [_FN1] = LAYOUT(
-        KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                                          KC_F7,   KC_F8,   KC_F9,    KC_F10,  KC_F11,  KC_F12,
-        _______,  _______, _______, _______, _______, _______,                                        _______, _______, _______,  _______, _______, _______,
-        _______,  _______, _______, _______, _______, _______,                                        _______, _______, _______,  _______, _______, _______,
-        MO(_FN2), _______, _______, _______, _______, _______,                                        _______, _______, RGB_RMOD, RGB_MOD, RGB_TOG, MO(_FN2),
-        _______,  _______, KC_MUTE, KC_VOLD, KC_VOLU,                                                          RGB_VAI, RGB_VAD,  RGB_SAI, RGB_SAD, _______,
-                                                               _______, _______,    _______, _______,
-                                                                        _______,    RGB_HUI,
-                                                      _______, _______, _______,    RGB_HUD, _______, _______
-    ),
-    [_FN2] = LAYOUT(
-        KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                                          KC_F7,   KC_F8,   KC_F9,    KC_F10,  KC_F11,  KC_F12,
-        _______, _______, _______, _______, _______, _______,                                        _______, _______, _______,  _______, _______, _______,
-        _______, _______, _______, QK_BOOT,   _______, _______,                                        _______, _______, QK_BOOT,    _______, _______, _______,
-        _______, _______, _______, _______, _______, _______,                                        _______, _______, RGB_RMOD, RGB_MOD, RGB_TOG, _______,
-        _______, _______, KC_MUTE, KC_VOLD, KC_VOLU,                                                          RGB_VAI, RGB_VAD,  RGB_SAI, RGB_SAD, _______,
-                                                              _______, _______,    _______, _______,
-                                                                       _______,    RGB_HUI,
-                                                     _______, _______, _______,    RGB_HUD, _______, _______
-    )
-
-};
diff --git a/keyboards/momoka_ergo/keymaps/default/readme.md b/keyboards/momoka_ergo/keymaps/default/readme.md
deleted file mode 100644
index 390149d6bb..0000000000
--- a/keyboards/momoka_ergo/keymaps/default/readme.md
+++ /dev/null
@@ -1 +0,0 @@
-# The default keymap for momoka_ergo
diff --git a/keyboards/momoka_ergo/momoka_ergo.c b/keyboards/momoka_ergo/momoka_ergo.c
deleted file mode 100644
index 8069d7f512..0000000000
--- a/keyboards/momoka_ergo/momoka_ergo.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/* Copyright 2021 StefanGrindelwald
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "momoka_ergo.h"
diff --git a/keyboards/momoka_ergo/momoka_ergo.h b/keyboards/momoka_ergo/momoka_ergo.h
deleted file mode 100644
index 1bbc1b242a..0000000000
--- a/keyboards/momoka_ergo/momoka_ergo.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* Copyright 2021 StefanGrindelwald
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "quantum.h"
-
-#define XXX KC_NO
-
-/* This is a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
-#define LAYOUT( \
-    L05, L04, L03, L02, L01, L00,                       R70, R71, R72, R73, R74, R75, \
-    L15, L14, L13, L12, L11, L10,                       R80, R81, R82, R83, R84, R85, \
-    L25, L24, L23, L22, L21, L20,                       R90, R91, R92, R93, R94, R95, \
-    L35, L34, L33, L32, L31, L30,                       RA0, RA1, RA2, RA3, RA4, RA5, \
-    L45, L44, L43, L42, L41,                                 RB1, RB2, RB3, RB4, RB5, \
-                                  L51, L40,   RB0, RC1,                               \
-                                       L50,   RC0,                                    \
-                             L52, L61, L60,   RD0, RD1, RC2                           \
-    ) \
-    { \
-        { L00, L01, L02, L03, L04, L05 }, \
-        { L10, L11, L12, L13, L14, L15 }, \
-        { L20, L21, L22, L23, L24, L25 }, \
-        { L30, L31, L32, L33, L34, L35 }, \
-        { L40, L41, L42, L43, L44, L45 }, \
-        { L50, L51, L52, XXX, XXX, XXX }, \
-        { L60, L61, XXX, XXX, XXX, XXX }, \
-        { R70, R71, R72, R73, R74, R75 }, \
-        { R80, R81, R82, R83, R84, R85 }, \
-        { R90, R91, R92, R93, R94, R95 }, \
-        { RA0, RA1, RA2, RA3, RA4, RA5 }, \
-        { RB0, RB1, RB2, RB3, RB4, RB5 }, \
-        { RC0, RC1, RC2, XXX, XXX, XXX }, \
-        { RD0, RD1, XXX, XXX, XXX, XXX }  \
-    }
diff --git a/keyboards/momoka_ergo/readme.md b/keyboards/momoka_ergo/readme.md
deleted file mode 100644
index d0a289abaf..0000000000
--- a/keyboards/momoka_ergo/readme.md
+++ /dev/null
@@ -1,29 +0,0 @@
-# momoka_ergo
-
-![momoka_ergo](https://github.com/StefanGrindelwald/TestDemo/blob/master/Momoka_ergo.jpg?raw=true)
-
-The MOMOKA Ergo is a split keyboard that is based on the Ergodox standard layout. It has 35 keys and 11 RGB backlights on each part. The two parts of the keyboard is connected by a TRRS cable.
-
-* Keyboard Maintainer: [StefanGrindelwald](https://github.com/StefanGrindelwald)
-* Hardware Supported: momoka.co/ergo
-* Hardware Availability: momoka.co/ergo
-
-Bootloader:
-
-With the default keymap, you can easily use FN+Shift+D to enter the bootloader in left side and FN+shift+K in right side. Or you can just use the microswitch in the PCB.
-
-Make example for this keyboard (after setting up your build environment):
-
-    make momoka_ergo:default
-
-Flashing example for this keyboard(Note that you need flash the both side keyboard respectively):
-
-For the left side:
-
-    make momoka_ergo:default:dfu-split-left
-
-For the right side:
-
-    make momoka_ergo:default:dfu-split-right
-    
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/momoka_ergo/rules.mk b/keyboards/momoka_ergo/rules.mk
deleted file mode 100644
index 509dcc85c5..0000000000
--- a/keyboards/momoka_ergo/rules.mk
+++ /dev/null
@@ -1,19 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes        # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-SPLIT_KEYBOARD = yes