Add eeprom defaults for tinyuf2 bootloader (#18042)

3 files changed, 0 insertions, 93 deletions

diff --git a/keyboards/mlego/m48/rev1/config.h b/keyboards/mlego/m48/rev1/config.h
index 5f20d8c980..b0fa3e95a5 100644
--- a/keyboards/mlego/m48/rev1/config.h
+++ b/keyboards/mlego/m48/rev1/config.h
@@ -51,6 +51,3 @@
 #define RGBLIGHT_EFFECT_TWINKLE
 
 #endif
-
-// you want to comment this if using stm32-dfu as bootloader
-#define FEE_PAGE_BASE_ADDRESS 0x08008000
diff --git a/keyboards/mlego/m48/rev1/ld/STM32F401xE.ld b/keyboards/mlego/m48/rev1/ld/STM32F401xE.ld
deleted file mode 100644
index daec7d8583..0000000000
--- a/keyboards/mlego/m48/rev1/ld/STM32F401xE.ld
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * STM32F401xE memory setup.
- */
-MEMORY
-{
-    flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */
-    flash1 (rx) : org = 0x08004000, len = 16k
-    flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */
-    flash3 (rx) : org = 0x0800C000, len = 16k
-    flash4 (rx) : org = 0x08010000, len = 512k - 64k
-    flash5 (rx) : org = 0x00000000, len = 0
-    flash6 (rx) : org = 0x00000000, len = 0
-    flash7 (rx) : org = 0x00000000, len = 0
-    ram0   (wx) : org = 0x20000000, len = 96k
-    ram1   (wx) : org = 0x00000000, len = 0
-    ram2   (wx) : org = 0x00000000, len = 0
-    ram3   (wx) : org = 0x00000000, len = 0
-    ram4   (wx) : org = 0x00000000, len = 0
-    ram5   (wx) : org = 0x00000000, len = 0
-    ram6   (wx) : org = 0x00000000, len = 0
-    ram7   (wx) : org = 0x00000000, len = 0
-}
-
-/* For each data/text section two region are defined, a virtual region
-   and a load region (_LMA suffix).*/
-
-/* Flash region to be used for exception vectors.*/
-REGION_ALIAS("VECTORS_FLASH", flash4);
-REGION_ALIAS("VECTORS_FLASH_LMA", flash4);
-
-/* Flash region to be used for constructors and destructors.*/
-REGION_ALIAS("XTORS_FLASH", flash4);
-REGION_ALIAS("XTORS_FLASH_LMA", flash4);
-
-/* Flash region to be used for code text.*/
-REGION_ALIAS("TEXT_FLASH", flash4);
-REGION_ALIAS("TEXT_FLASH_LMA", flash4);
-
-/* Flash region to be used for read only data.*/
-REGION_ALIAS("RODATA_FLASH", flash4);
-REGION_ALIAS("RODATA_FLASH_LMA", flash4);
-
-/* Flash region to be used for various.*/
-REGION_ALIAS("VARIOUS_FLASH", flash4);
-REGION_ALIAS("VARIOUS_FLASH_LMA", flash4);
-
-/* Flash region to be used for RAM(n) initialization data.*/
-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4);
-
-/* RAM region to be used for Main stack. This stack accommodates the processing
-   of all exceptions and interrupts.*/
-REGION_ALIAS("MAIN_STACK_RAM", ram0);
-
-/* RAM region to be used for the process stack. This is the stack used by
-   the main() function.*/
-REGION_ALIAS("PROCESS_STACK_RAM", ram0);
-
-/* RAM region to be used for data segment.*/
-REGION_ALIAS("DATA_RAM", ram0);
-REGION_ALIAS("DATA_RAM_LMA", flash4);
-
-/* RAM region to be used for BSS segment.*/
-REGION_ALIAS("BSS_RAM", ram0);
-
-/* RAM region to be used for the default heap.*/
-REGION_ALIAS("HEAP_RAM", ram0);
-
-/* Generic rules inclusion.*/
-INCLUDE rules.ld
-
-/* TinyUF2 bootloader reset support */
-_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */
diff --git a/keyboards/mlego/m48/rev1/rules.mk b/keyboards/mlego/m48/rev1/rules.mk
index 8ddaf1d5be..20a1e60817 100644
--- a/keyboards/mlego/m48/rev1/rules.mk
+++ b/keyboards/mlego/m48/rev1/rules.mk
@@ -4,8 +4,6 @@ BOARD = BLACKPILL_STM32_F401
 
 # Bootloader selection
 BOOTLOADER = tinyuf2
-MCU_LDSCRIPT = STM32F401xE
-EEPROM_DRIVER = vendor
 #BOOTLOADER = stm32-dfu
 
 # Build Options