Remove non-Keychron keyboards

8 files changed, 0 insertions, 253 deletions

diff --git a/keyboards/millipad/config.h b/keyboards/millipad/config.h
deleted file mode 100644
index 7c0aa209c1..0000000000
--- a/keyboards/millipad/config.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
-Copyright 2021 Jirou
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 2
-#define MATRIX_COLS 6
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { C6, C7 }
-#define MATRIX_COL_PINS { F0, F1, F4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-
-#define LOCKING_RESYNC_ENABLE
-
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-#define FORCE_NKRO
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
-
-/* Encoder Definitions */
-
-#define ENCODERS_PAD_A { D3 }
-#define ENCODERS_PAD_B { D2 }
-#define ENCODER_RESOLUTION 4
diff --git a/keyboards/millipad/info.json b/keyboards/millipad/info.json
deleted file mode 100644
index 4f0318ce65..0000000000
--- a/keyboards/millipad/info.json
+++ /dev/null
@@ -1,30 +0,0 @@
-{
-    "keyboard_name": "millipad",
-    "manufacturer": "Jirou",
-    "url": "https://github.com/GLozares/millipad",
-    "maintainer": "Jirou",
-    "usb": {
-    	"vid": "0xFEED",
-    	"pid": "0x1A1B",
-    	"device_version": "0.0.1"
-    },
-    "layouts": {
-        "LAYOUT": {
-            "layout": [
-                {"label": "k00", "x": 0, "y": 0},
-                {"label": "k01", "x": 1, "y": 0},
-                {"label": "k02", "x": 2, "y": 0},
-				{"label": "k03", "x": 3, "y": 0},
-				{"label": "k04", "x": 4, "y": 0},
-				{"label": "k05", "x": 5, "y": 0},
-				
-				{"label": "k10", "x": 0, "y": 1},
-				{"label": "k11", "x": 1, "y": 1},
-				{"label": "k12", "x": 2, "y": 1},
-				{"label": "k13", "x": 3, "y": 1},
-				{"label": "k14", "x": 4, "y": 1},
-				{"label": "k15", "x": 5, "y": 1}
-            ]
-        }
-    }
-}
diff --git a/keyboards/millipad/keymaps/default/keymap.c b/keyboards/millipad/keymaps/default/keymap.c
deleted file mode 100644
index ae6e374908..0000000000
--- a/keyboards/millipad/keymaps/default/keymap.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* Copyright 2021 Jirou
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-// Defines names for use in layer keycodes and the keymap
-enum layer_names {
-    _BASE
-};
-
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-    [_BASE] = LAYOUT(
-        KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11,
-		KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F12
-    )
-};
-
-
-bool encoder_update_user(uint8_t index, bool clockwise) {
-    if (index == 0) { /* First encoder */
-        if (clockwise) {
-            tap_code(KC_VOLU);
-        } else {
-            tap_code(KC_VOLD);
-        }
-    }
-    return true;
-}
diff --git a/keyboards/millipad/keymaps/default/readme.md b/keyboards/millipad/keymaps/default/readme.md
deleted file mode 100644
index effc205a24..0000000000
--- a/keyboards/millipad/keymaps/default/readme.md
+++ /dev/null
@@ -1 +0,0 @@
-# The default keymap for millipad
diff --git a/keyboards/millipad/millipad.c b/keyboards/millipad/millipad.c
deleted file mode 100644
index 5b6b668289..0000000000
--- a/keyboards/millipad/millipad.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/* Copyright 2021 Jirou
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "millipad.h"
diff --git a/keyboards/millipad/millipad.h b/keyboards/millipad/millipad.h
deleted file mode 100644
index 35eb843d6f..0000000000
--- a/keyboards/millipad/millipad.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* Copyright 2021 Jirou
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "quantum.h"
-
-/* This is a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
-#define LAYOUT( \
-    k00, k01, k02, k03, k04, k05, \
-    k10, k11, k12, k13, k14, k15    \
-) { \
-    { k00, k01, k02, k03, k04, k05 }, \
-    { k10, k11, k12, k13, k14, k15 }  \
-}
diff --git a/keyboards/millipad/readme.md b/keyboards/millipad/readme.md
deleted file mode 100644
index 8cabc8a962..0000000000
--- a/keyboards/millipad/readme.md
+++ /dev/null
@@ -1,29 +0,0 @@
-# millipad
-
-![millipad](https://i.imgur.com/ZM2qel5h.jpg)
-
-An open source 2x6 macropad with rotary encoder. Designed to be cheap and simple.
-
-
-## More Pictures:
-![PCB Layout](https://i.imgur.com/ilhfBfQ.png)
-![Front of PCB](https://i.imgur.com/UiQkmuvh.jpg)
-![Back of PCB](https://i.imgur.com/Inh6UTLh.jpg)
-
-
-* Keyboard Maintainer: [Jirou](https://github.com/GLozares)
-* Hardware Supported: Jirou.Design Millipad
-* Hardware Availability: Open Source at https://github.com/GLozares/millipad
-
-## Bootloader Mode (Flashing Hex Files): 
-To flash a new hex file, press the hardware reset button located to the left of the rotary encoder to enter Bootloader mode.
-
-Make example for this keyboard (after setting up your build environment):
-
-    make millipad:default
-
-Flashing example for this keyboard:
-
-    make millipad:default:flash
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/millipad/rules.mk b/keyboards/millipad/rules.mk
deleted file mode 100644
index e73fd25b16..0000000000
--- a/keyboards/millipad/rules.mk
+++ /dev/null
@@ -1,19 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-ENCODER_ENABLE = yes
\ No newline at end of file