[Keyboard] move woodkeys.click keyboards to /woodkeys (#16113)

35 files changed, 0 insertions, 2982 deletions

diff --git a/keyboards/meira/TWIlib.c b/keyboards/meira/TWIlib.c
deleted file mode 100755
index 8f5658fcdb..0000000000
--- a/keyboards/meira/TWIlib.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * TWIlib.c
- *
- *  Created: 6/01/2014 10:41:33 PM
- *  Author: Chris Herring
- */
-
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include "TWIlib.h"
-#include <util/delay.h>
-#include "print.h"
-
-// Global transmit buffer
-volatile uint8_t *TWITransmitBuffer;
-// Global receive buffer
-volatile uint8_t TWIReceiveBuffer[RXMAXBUFLEN];
-// Buffer indexes
-volatile int TXBuffIndex; // Index of the transmit buffer. Is volatile, can change at any time.
-int RXBuffIndex; // Current index in the receive buffer
-// Buffer lengths
-int TXBuffLen; // The total length of the transmit buffer
-int RXBuffLen; // The total number of bytes to read (should be less than RXMAXBUFFLEN)
-
-TWIInfoStruct TWIInfo;
-
-void TWIInit()
-{
-	TWIInfo.mode = Ready;
-	TWIInfo.errorCode = 0xFF;
-	TWIInfo.repStart = 0;
-	// Set pre-scalers (no pre-scaling)
-	TWSR = 0;
-	// Set bit rate
-	TWBR = ((F_CPU / TWI_FREQ) - 16) / 2;
-	// Enable TWI and interrupt
-	TWCR = (1 << TWIE) | (1 << TWEN);
-}
-
-uint8_t isTWIReady()
-{
-	if ( (TWIInfo.mode == Ready) | (TWIInfo.mode == RepeatedStartSent) )
-	{
-
-//        xprintf("i2c ready\n");
-		return 1;
-	}
-	else
-	{
-		if(TWIInfo.mode == Initializing){
-			switch(TWIInfo.errorCode){
-		        case TWI_SUCCESS:
-		            break;
-		        case TWI_NO_RELEVANT_INFO:
-
-		        	break;
-				case TWI_LOST_ARBIT:
-				case TWI_MT_DATA_NACK:
-					// Some kind of I2C error, reset and re-init
-		        	xprintf("I2C init error: %d\n", TWIInfo.errorCode);
-			        TWCR = (1 << TWINT)|(1 << TWSTO);
-		        	TWIInit();
-		        	break;
-		        default:
-		        	xprintf("Other i2c init error: %d\n", TWIInfo.errorCode);
-			}
-		}
-		return 0;
-	}
-}
-
-
-void TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart, uint8_t blocking)
-{
-	// Wait until ready
-	while (!isTWIReady()) {_delay_us(1);}
-	// Reset the I2C stuff
-	TWCR = (1 << TWINT)|(1 << TWSTO);
-	TWIInit();
-	// Set repeated start mode
-	TWIInfo.repStart = repStart;
-	// Copy transmit info to global variables
-	TWITransmitBuffer = (uint8_t *)TXdata;
-	TXBuffLen = dataLen;
-	TXBuffIndex = 0;
-
-	// If a repeated start has been sent, then devices are already listening for an address
-	// and another start does not need to be sent.
-	if (TWIInfo.mode == RepeatedStartSent)
-	{
-		TWIInfo.mode = Initializing;
-		TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer
-		TWISendTransmit(); // Send the data
-	}
-	else // Otherwise, just send the normal start signal to begin transmission.
-	{
-		TWIInfo.mode = Initializing;
-		TWISendStart();
-	}
-	if(blocking){
-		// Wait until ready
-		while (!isTWIReady()){_delay_us(1);}
-	}
-}
-
-
-// uint8_t TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart)
-// {
-// 	if (dataLen <= TXMAXBUFLEN)
-// 	{
-// 		// Wait until ready
-// 		while (!isTWIReady()) {_delay_us(1);}
-// 		// Set repeated start mode
-// 		TWIInfo.repStart = repStart;
-// 		// Copy data into the transmit buffer
-// 		uint8_t *data = (uint8_t *)TXdata;
-// 		for (int i = 0; i < dataLen; i++)
-// 		{
-// 			TWITransmitBuffer[i] = data[i];
-// 		}
-// 		// Copy transmit info to global variables
-// 		TXBuffLen = dataLen;
-// 		TXBuffIndex = 0;
-
-// 		// If a repeated start has been sent, then devices are already listening for an address
-// 		// and another start does not need to be sent.
-// 		if (TWIInfo.mode == RepeatedStartSent)
-// 		{
-// 			TWIInfo.mode = Initializing;
-// 			TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer
-// 			TWISendTransmit(); // Send the data
-// 		}
-// 		else // Otherwise, just send the normal start signal to begin transmission.
-// 		{
-// 			TWIInfo.mode = Initializing;
-// 			TWISendStart();
-// 		}
-
-// 	}
-// 	else
-// 	{
-// 		return 1; // return an error if data length is longer than buffer
-// 	}
-// 	return 0;
-// }
-
-uint8_t TWIReadData(uint8_t TWIaddr, uint8_t bytesToRead, uint8_t repStart)
-{
-	// Check if number of bytes to read can fit in the RXbuffer
-	if (bytesToRead < RXMAXBUFLEN)
-	{
-		// Reset buffer index and set RXBuffLen to the number of bytes to read
-		RXBuffIndex = 0;
-		RXBuffLen = bytesToRead;
-		// Create the one value array for the address to be transmitted
-		uint8_t TXdata[1];
-		// Shift the address and AND a 1 into the read write bit (set to write mode)
-		TXdata[0] = (TWIaddr << 1) | 0x01;
-		// Use the TWITransmitData function to initialize the transfer and address the slave
-		TWITransmitData(TXdata, 1, repStart, 0);
-	}
-	else
-	{
-		return 0;
-	}
-	return 1;
-}
-
-ISR (TWI_vect)
-{
-	switch (TWI_STATUS)
-	{
-		// ----\/ ---- MASTER TRANSMITTER OR WRITING ADDRESS ----\/ ----  //
-		case TWI_MT_SLAW_ACK: // SLA+W transmitted and ACK received
-		// Set mode to Master Transmitter
-		TWIInfo.mode = MasterTransmitter;
-		case TWI_START_SENT: // Start condition has been transmitted
-		case TWI_MT_DATA_ACK: // Data byte has been transmitted, ACK received
-			if (TXBuffIndex < TXBuffLen) // If there is more data to send
-			{
-				TWDR = TWITransmitBuffer[TXBuffIndex++]; // Load data to transmit buffer
-				TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
-				TWISendTransmit(); // Send the data
-			}
-			// This transmission is complete however do not release bus yet
-			else if (TWIInfo.repStart)
-			{
-				TWIInfo.errorCode = 0xFF;
-				TWISendStart();
-			}
-			// All transmissions are complete, exit
-			else
-			{
-				TWIInfo.mode = Ready;
-				TWIInfo.errorCode = 0xFF;
-				TWISendStop();
-			}
-			break;
-
-		// ----\/ ---- MASTER RECEIVER ----\/ ----  //
-
-		case TWI_MR_SLAR_ACK: // SLA+R has been transmitted, ACK has been received
-			// Switch to Master Receiver mode
-			TWIInfo.mode = MasterReceiver;
-			// If there is more than one byte to be read, receive data byte and return an ACK
-			if (RXBuffIndex < RXBuffLen-1)
-			{
-				TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
-				TWISendACK();
-			}
-			// Otherwise when a data byte (the only data byte) is received, return NACK
-			else
-			{
-				TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
-				TWISendNACK();
-			}
-			break;
-
-		case TWI_MR_DATA_ACK: // Data has been received, ACK has been transmitted.
-
-			/// -- HANDLE DATA BYTE --- ///
-			TWIReceiveBuffer[RXBuffIndex++] = TWDR;
-			// If there is more than one byte to be read, receive data byte and return an ACK
-			if (RXBuffIndex < RXBuffLen-1)
-			{
-				TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
-				TWISendACK();
-			}
-			// Otherwise when a data byte (the only data byte) is received, return NACK
-			else
-			{
-				TWIInfo.errorCode = TWI_NO_RELEVANT_INFO;
-				TWISendNACK();
-			}
-			break;
-
-		case TWI_MR_DATA_NACK: // Data byte has been received, NACK has been transmitted. End of transmission.
-
-			/// -- HANDLE DATA BYTE --- ///
-			TWIReceiveBuffer[RXBuffIndex++] = TWDR;
-			// This transmission is complete however do not release bus yet
-			if (TWIInfo.repStart)
-			{
-				TWIInfo.errorCode = 0xFF;
-				TWISendStart();
-			}
-			// All transmissions are complete, exit
-			else
-			{
-				TWIInfo.mode = Ready;
-				TWIInfo.errorCode = 0xFF;
-				TWISendStop();
-			}
-			break;
-
-		// ----\/ ---- MT and MR common ----\/ ---- //
-
-		case TWI_MR_SLAR_NACK: // SLA+R transmitted, NACK received
-		case TWI_MT_SLAW_NACK: // SLA+W transmitted, NACK received
-		case TWI_MT_DATA_NACK: // Data byte has been transmitted, NACK received
-		case TWI_LOST_ARBIT: // Arbitration has been lost
-			// Return error and send stop and set mode to ready
-			if (TWIInfo.repStart)
-			{
-				TWIInfo.errorCode = TWI_STATUS;
-				TWISendStart();
-			}
-			// All transmissions are complete, exit
-			else
-			{
-				TWIInfo.mode = Ready;
-				TWIInfo.errorCode = TWI_STATUS;
-				TWISendStop();
-			}
-			break;
-		case TWI_REP_START_SENT: // Repeated start has been transmitted
-			// Set the mode but DO NOT clear TWINT as the next data is not yet ready
-			TWIInfo.mode = RepeatedStartSent;
-			break;
-
-		// ----\/ ---- SLAVE RECEIVER ----\/ ----  //
-
-		// TODO  IMPLEMENT SLAVE RECEIVER FUNCTIONALITY
-
-		// ----\/ ---- SLAVE TRANSMITTER ----\/ ----  //
-
-		// TODO  IMPLEMENT SLAVE TRANSMITTER FUNCTIONALITY
-
-		// ----\/ ---- MISCELLANEOUS STATES ----\/ ----  //
-		case TWI_NO_RELEVANT_INFO: // It is not really possible to get into this ISR on this condition
-								   // Rather, it is there to be manually set between operations
-			break;
-		case TWI_ILLEGAL_START_STOP: // Illegal START/STOP, abort and return error
-			TWIInfo.errorCode = TWI_ILLEGAL_START_STOP;
-			TWIInfo.mode = Ready;
-			TWISendStop();
-			break;
-	}
-
-}
diff --git a/keyboards/meira/TWIlib.h b/keyboards/meira/TWIlib.h
deleted file mode 100755
index 8ba261c6e5..0000000000
--- a/keyboards/meira/TWIlib.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * TWIlib.h
- *
- * Created: 6/01/2014 10:38:42 PM
- *  Author: Chris Herring
- */
-
-
-#ifndef TWILIB_H_
-#define TWILIB_H_
-// TWI bit rate
-#define TWI_FREQ 400000
-// Get TWI status
-#define TWI_STATUS	(TWSR & 0xF8)
-// Transmit buffer length
-#define TXMAXBUFLEN 20
-// Receive buffer length
-#define RXMAXBUFLEN 20
-
-typedef enum {
-	Ready,
-	Initializing,
-	RepeatedStartSent,
-	MasterTransmitter,
-	MasterReceiver,
-	SlaceTransmitter,
-	SlaveReciever
-	} TWIMode;
-
- typedef struct TWIInfoStruct{
-	TWIMode mode;
-	uint8_t errorCode;
-	uint8_t repStart;
-	}TWIInfoStruct;
-
-extern TWIInfoStruct TWIInfo;
-
-// TWI Status Codes
-#define TWI_START_SENT			0x08 // Start sent
-#define TWI_REP_START_SENT		0x10 // Repeated Start sent
-// Master Transmitter Mode
-#define TWI_MT_SLAW_ACK			0x18 // SLA+W sent and ACK received
-#define TWI_MT_SLAW_NACK		0x20 // SLA+W sent and NACK received
-#define TWI_MT_DATA_ACK			0x28 // DATA sent and ACK received
-#define TWI_MT_DATA_NACK		0x30 // DATA sent and NACK received
-// Master Receiver Mode
-#define TWI_MR_SLAR_ACK			0x40 // SLA+R sent, ACK received
-#define TWI_MR_SLAR_NACK		0x48 // SLA+R sent, NACK received
-#define TWI_MR_DATA_ACK			0x50 // Data received, ACK returned
-#define TWI_MR_DATA_NACK		0x58 // Data received, NACK returned
-
-// Miscellaneous States
-#define TWI_LOST_ARBIT			0x38 // Arbitration has been lost
-#define TWI_NO_RELEVANT_INFO	0xF8 // No relevant information available
-#define TWI_ILLEGAL_START_STOP	0x00 // Illegal START or STOP condition has been detected
-#define TWI_SUCCESS				0xFF // Successful transfer, this state is impossible from TWSR as bit2 is 0 and read only
-
-
-#define TWISendStart()		(TWCR = (1<<TWINT)|(1<<TWSTA)|(1<<TWEN)|(1<<TWIE)) // Send the START signal, enable interrupts and TWI, clear TWINT flag to resume transfer.
-#define TWISendStop()		(TWCR = (1<<TWINT)|(1<<TWSTO)|(1<<TWEN)|(1<<TWIE)) // Send the STOP signal, enable interrupts and TWI, clear TWINT flag.
-#define TWISendTransmit()	(TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)) // Used to resume a transfer, clear TWINT and ensure that TWI and interrupts are enabled.
-#define TWISendACK()		(TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)|(1<<TWEA)) // FOR MR mode. Resume a transfer, ensure that TWI and interrupts are enabled and respond with an ACK if the device is addressed as a slave or after it receives a byte.
-#define TWISendNACK()		(TWCR = (1<<TWINT)|(1<<TWEN)|(1<<TWIE)) // FOR MR mode. Resume a transfer, ensure that TWI and interrupts are enabled but DO NOT respond with an ACK if the device is addressed as a slave or after it receives a byte.
-
-// Function declarations
-void TWITransmitData(void *const TXdata, uint8_t dataLen, uint8_t repStart, uint8_t blocking);
-void TWIInit(void);
-uint8_t TWIReadData(uint8_t TWIaddr, uint8_t bytesToRead, uint8_t repStart);
-uint8_t isTWIReady(void);
-
-#endif // TWICOMMS_H_
\ No newline at end of file
diff --git a/keyboards/meira/config.h b/keyboards/meira/config.h
deleted file mode 100644
index 999ab1bf8a..0000000000
--- a/keyboards/meira/config.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
-Copyright 2017 Cole Markham
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6061
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    WoodKeys.click
-#define PRODUCT         Meira
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 12
-
-/* COL2ROW, ROW2COL*/
-//#define DIODE_DIRECTION
-
-#ifdef BACKLIGHT_ENABLE
-#define BACKLIGHT_LEVELS 10
-#define BACKLIGHT_PWM_MAP {2, 4, 8, 16, 40, 55, 70, 128, 200, 255}
-#endif
-
-#ifdef RGBLIGHT_ENABLE
-#define RGB_DI_PIN D3
-
-#define RGBLED_NUM 15    // Number of LEDs
-#endif
diff --git a/keyboards/meira/featherble/config.h b/keyboards/meira/featherble/config.h
deleted file mode 100644
index 94bef3b330..0000000000
--- a/keyboards/meira/featherble/config.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
-Copyright 2017 Cole Markham, WoodKeys.click
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F7, F6, F5, F4 }
-// Column pins to demux in LSB order
-#define MATRIX_COL_PINS { C7, B7, B6, C6, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN, NO_PIN }
-#define MATRIX_COL_PINS_SCANNED { C7, B7, B6, C6 }
-#define LED_EN_PIN D2
-#define UNUSED_PINS
-
-#define QMK_SPEAKER B5
-#define AUDIO_PIN B5
-#define AUDIO_VOICES
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-//#define BACKLIGHT_LEVELS 3
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
diff --git a/keyboards/meira/featherble/featherble.c b/keyboards/meira/featherble/featherble.c
deleted file mode 100644
index 63ade21904..0000000000
--- a/keyboards/meira/featherble/featherble.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/* Copyright 2017 Cole Markham, WoodKeys.click
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "meira.h"
diff --git a/keyboards/meira/featherble/featherble.h b/keyboards/meira/featherble/featherble.h
deleted file mode 100644
index eab7c639b9..0000000000
--- a/keyboards/meira/featherble/featherble.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* Copyright 2017 Cole Markham, WoodKeys.click
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "meira.h"
diff --git a/keyboards/meira/featherble/rules.mk b/keyboards/meira/featherble/rules.mk
deleted file mode 100644
index 01f1af1ae8..0000000000
--- a/keyboards/meira/featherble/rules.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-# Processor frequency
-F_CPU = 8000000
-
-BLUETOOTH_ENABLE = yes
-BLUETOOTH_DRIVER = BluefruitLE
diff --git a/keyboards/meira/info.json b/keyboards/meira/info.json
deleted file mode 100644
index de9ce42f8e..0000000000
--- a/keyboards/meira/info.json
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-    "keyboard_name": "Meira",
-    "url": "",
-    "maintainer": "colemarkham",
-    "layout_aliases": {
-        "LAYOUT": "LAYOUT_ortho_4x12"
-    },
-    "layouts": {
-        "LAYOUT_ortho_4x12": {
-            "layout": [
-                {"x":0, "y":0},
-                {"x":1, "y":0},
-                {"x":2, "y":0},
-                {"x":3, "y":0},
-                {"x":4, "y":0},
-                {"x":5, "y":0},
-                {"x":6, "y":0},
-                {"x":7, "y":0},
-                {"x":8, "y":0},
-                {"x":9, "y":0},
-                {"x":10, "y":0},
-                {"x":11, "y":0},
-
-                {"x":0, "y":1},
-                {"x":1, "y":1},
-                {"x":2, "y":1},
-                {"x":3, "y":1},
-                {"x":4, "y":1},
-                {"x":5, "y":1},
-                {"x":6, "y":1},
-                {"x":7, "y":1},
-                {"x":8, "y":1},
-                {"x":9, "y":1},
-                {"x":10, "y":1},
-                {"x":11, "y":1},
-
-                {"x":0, "y":2},
-                {"x":1, "y":2},
-                {"x":2, "y":2},
-                {"x":3, "y":2},
-                {"x":4, "y":2},
-                {"x":5, "y":2},
-                {"x":6, "y":2},
-                {"x":7, "y":2},
-                {"x":8, "y":2},
-                {"x":9, "y":2},
-                {"x":10, "y":2},
-                {"x":11, "y":2},
-
-                {"x":0, "y":3},
-                {"x":1, "y":3},
-                {"x":2, "y":3},
-                {"x":3, "y":3},
-                {"x":4, "y":3},
-                {"x":5, "y":3},
-                {"x":6, "y":3},
-                {"x":7, "y":3},
-                {"x":8, "y":3},
-                {"x":9, "y":3},
-                {"x":10, "y":3},
-                {"x":11, "y":3}
-            ]
-        }
-    }
-}
diff --git a/keyboards/meira/issi.c b/keyboards/meira/issi.c
deleted file mode 100755
index 600a465ba3..0000000000
--- a/keyboards/meira/issi.c
+++ /dev/null
@@ -1,286 +0,0 @@
-#ifdef ISSI_ENABLE
-
-#include <stdlib.h>
-#include <stdint.h>
-#include <util/delay.h>
-#include <avr/sfr_defs.h>
-#include <avr/io.h>
-#include <util/twi.h>
-#include "issi.h"
-#include "print.h"
-#include "TWIlib.h"
-
-#define ISSI_ADDR_DEFAULT 0xE8
-
-#define ISSI_REG_CONFIG 0x00
-#define ISSI_REG_CONFIG_PICTUREMODE 0x00
-#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
-
-#define ISSI_CONF_PICTUREMODE 0x00
-#define ISSI_CONF_AUTOFRAMEMODE 0x04
-#define ISSI_CONF_AUDIOMODE 0x08
-
-#define ISSI_REG_PICTUREFRAME 0x01
-
-#define ISSI_REG_SHUTDOWN 0x0A
-#define ISSI_REG_AUDIOSYNC 0x06
-
-#define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
-uint8_t control[8][9] = {
-    {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0},
-    {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0},
-    {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0},
-    {0, 0, 0, 0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0, 0, 0, 0},
-};
-ISSIDeviceStruct *issi_devices[4] = {0, 0, 0, 0};
-
-#ifndef cbi
-#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
-#endif
-
-#ifndef sbi
-#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
-#endif
-
-#define I2C_WRITE 0
-#define F_SCL 400000UL // SCL frequency
-#define Prescaler 1
-#define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16 ) / 2)
-
-uint8_t i2c_start(uint8_t address)
-{
-    // reset TWI control register
-    TWCR = 0;
-    // transmit START condition
-    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-    // wait for end of transmission
-    while( !(TWCR & (1<<TWINT)) );
-
-    // check if the start condition was successfully transmitted
-    if((TWSR & 0xF8) != TW_START){ return 1; }
-
-    // load slave address into data register
-    TWDR = address;
-    // start transmission of address
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    // wait for end of transmission
-    while( !(TWCR & (1<<TWINT)) );
-
-    // check if the device has acknowledged the READ / WRITE mode
-    uint8_t twst = TW_STATUS & 0xF8;
-    if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return 1;
-
-    return 0;
-}
-
-uint8_t i2c_write(uint8_t data)
-{
-    // load data into data register
-    TWDR = data;
-    // start transmission of data
-    TWCR = (1 << TWINT) | (1 << TWEN);
-    // wait for end of transmission
-    while (!(TWCR & (1 << TWINT)))
-        ;
-
-    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
-        return 1;
-    }
-    return 0;
-}
-
-uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length)
-{
-    TWBR = (uint8_t)TWBR_val;
-    if (i2c_start(address | I2C_WRITE))
-        return 1;
-    for (uint16_t i = 0; i < length; i++) {
-        if (i2c_write(data[i]))
-            return 1;
-    }
-    // transmit STOP condition
-    TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWSTO);
-    return 0;
-}
-
-void setFrame(uint8_t device, uint8_t frame)
-{
-    static uint8_t current_frame = -1;
-    if(current_frame != frame){
-        uint8_t payload[] = {
-            ISSI_ADDR_DEFAULT | device << 1,
-            ISSI_COMMANDREGISTER,
-            frame
-        };
-        TWITransmitData(payload, sizeof(payload), 0, 1);
-    }
-    // static uint8_t current_frame = 0xFF;
-    // if(current_frame == frame){
-    //     // return;
-    // }
-    // uint8_t payload[2] = { ISSI_COMMANDREGISTER, frame };
-    // i2c_transmit(ISSI_ADDR_DEFAULT | device << 1, payload, 2);
-    // current_frame = frame;
-}
-
-void writeRegister8(uint8_t device, uint8_t frame, uint8_t reg, uint8_t data)
-{
-    // Set the frame
-    setFrame(device, frame);
-
-    // Write to the register
-    uint8_t payload[] = {
-        ISSI_ADDR_DEFAULT | device << 1,
-        reg,
-        data
-    };
-    TWITransmitData(payload, sizeof(payload), 0, 1);
-}
-
-// void activateLED(uint8_t matrix, uint8_t cx, uint8_t cy, uint8_t pwm)
-// {
-//     xprintf("activeLED: %02X %02X %02X %02X\n", matrix, cy, cx, pwm);
-//     uint8_t x = cx - 1;  // funciton takes 1 based counts, but we need 0...
-//     uint8_t y = cy - 1