[Keyboard] MechWild BB Steno (#17163)

* allowing the kt60 file to be modified so I can do things while waiting for it to be fixed upstream

* Initial commit

* testing modes

* working on puckbuddy firmware. This is all working for now but need to clean it up and personalize it.

* needs to be updated from vial build

* prepping for PR

* added rgb mode cycling to fn1 since it isn't on the encoder for these maps

* shipping firmware built. Need to clean up readme and info.json layout

* removing puckbuddy files from this branch

* readme done, prepping for PR

* info.json updated prepping for PR

* Restore cirque driver that was modified from puckbuddy testing on this branch

* applying changes from review

* Update keyboards/mechwild/bbs/bbs.c

* Fixed info.json

* Apply suggestions from code review

1 files changed, 96 insertions, 0 deletions

diff --git a/keyboards/mechwild/bbs/config.h b/keyboards/mechwild/bbs/config.h
new file mode 100644
index 0000000000..6fafe637e3
--- /dev/null
+++ b/keyboards/mechwild/bbs/config.h
@@ -0,0 +1,96 @@
+// Copyright 2022 Kyle McCreery (@kylemccreery)
+// SPDX-License-Identifier: GPL-2.0-or-later
+ 
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x6D77 // mw = "MechWild"
+#define PRODUCT_ID      0x170E
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    MechWild
+#define PRODUCT         BB Steno
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 6
+
+/* allows the "key" button on the blackpill to toggle caps lock for user testing before soldering */
+#define DIP_SWITCH_PINS { A0 }
+
+/* status light pins using the on board LED for the blackpill */
+#define LED_CAPS_LOCK_PIN C13
+#define LED_PIN_ON_STATE 0
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B12, B10, B13, B1, B14 }
+#define MATRIX_COL_PINS { B0, A7, A6, A5, A4, A3 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0