Remove non-Keychron keyboards

1 files changed, 0 insertions, 78 deletions

diff --git a/keyboards/mechlovin/zed60/config.h b/keyboards/mechlovin/zed60/config.h
deleted file mode 100644
index af78e10b7c..0000000000
--- a/keyboards/mechlovin/zed60/config.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
-Copyright 2022 Mechlovin'
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B10, B2, B1, B0, A2 }
-#define MATRIX_COL_PINS { A10, A3, A9, A8, B15, B14, B13, B12, B5, B4, B3, A15, B7, B6 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-#define LED_CAPS_LOCK_PIN A4
-
-#ifdef RGBLIGHT_ENABLE
-#define RGB_DI_PIN A7
-#define RGBLED_NUM 22
-#define RGBLIGHT_LIMIT_VAL 255
-
-#define WS2812_SPI SPID1 // default: SPID1
-#define WS2812_SPI_MOSI_PAL_MODE 5 // MOSI pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
-
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-#    define RGBLIGHT_HUE_STEP 8
-#    define RGBLIGHT_SAT_STEP 8
-#    define RGBLIGHT_VAL_STEP 8
-#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-
-#    define RGBLIGHT_EFFECT_BREATHING
-#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
-#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-#    define RGBLIGHT_EFFECT_SNAKE
-#    define RGBLIGHT_EFFECT_KNIGHT
-#    define RGBLIGHT_EFFECT_CHRISTMAS
-#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
-#    define RGBLIGHT_EFFECT_RGB_TEST
-#    define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-#endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5