change Adelais En Ciel rev. 3 from STM32F303 to APM32F103 MCU (#16964)

Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>

5 files changed, 32 insertions, 65 deletions

diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h
index c0817d6062..6efac57ee2 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h
+++ b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h
@@ -21,8 +21,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT      Adelais En Ciel Rev3
 
 #define MATRIX_ROW_PINS { A4, A3, C13, A1, A2}
-#define MATRIX_COL_PINS { B10, B11, B2, B1, B0, A6, A5, A14, A13, A15, B3, B4, B5, B8, B9 }
+#define MATRIX_COL_PINS { B10, B11, B2, B1, B0, A6, A5, A10, A9, A15, B3, B4, B5, B8, B9 }
 
+#ifdef  RGBLIGHT_ENABLE
 #define RGB_DI_PIN A7
 #define WS2812_SPI SPID1 // default: SPID1
 #define WS2812_SPI_MOSI_PAL_MODE 5 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5
@@ -40,7 +41,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
+#endif 
 
+#ifdef RGB_MATRIX_ENABLE
 //rgb matrix setting
 // This is a 7-bit address, that gets left-shifted and bit 0
 // set to 0 for write, 1 for read (as per I2C protocol)
@@ -52,13 +55,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DRIVER_ADDR_1 0b0110010
 #define DRIVER_COUNT 1
 #define DRIVER_LED_TOTAL 66
+
 #define RGB_MATRIX_KEYPRESSES // reacts to keypresses
 #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
 
 #define ENABLE_RGB_MATRIX_ALPHAS_MODS
@@ -108,12 +112,17 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGB_MATRIX_DISABLE_KEYCODES
 
+#define I2C1_CLOCK_SPEED 400000
+#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2
+
+#endif
+
+#ifdef ENCODER_ENABLE
 #define ENCODERS_PAD_A { B12 }
 #define ENCODERS_PAD_B { B13 }
 #define ENCODER_RESOLUTION 4
-
 #define TAP_CODE_DELAY 10
-
+#endif
 
 #define LED_NUM_LOCK_PIN A0
 #define LED_CAPS_LOCK_PIN C14
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/halconf.h b/keyboards/mechlovin/adelais/rgb_led/rev3/halconf.h
index d001829d03..a97c4bbc21 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev3/halconf.h
+++ b/keyboards/mechlovin/adelais/rgb_led/rev3/halconf.h
@@ -18,9 +18,7 @@
 
 #define HAL_USE_I2C TRUE
 
-#define PAL_USE_CALLBACKS FALSE
-
-#define PAL_USE_WAIT FALSE
+#define HAL_USE_SPI TRUE
 
 #include_next <halconf.h>
 
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/mcuconf.h b/keyboards/mechlovin/adelais/rgb_led/rev3/mcuconf.h
index 20d2a82c27..aa5ea7335b 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev3/mcuconf.h
+++ b/keyboards/mechlovin/adelais/rgb_led/rev3/mcuconf.h
@@ -18,18 +18,8 @@
 
 #include_next <mcuconf.h>
 
-#undef STM32_GPT_USE_TIM15
-#define STM32_GPT_USE_TIM15 FALSE
-
-#undef STM32_I2C_USE_I2C1
-#define STM32_I2C_USE_I2C1 TRUE
-
-#undef STM32_PWM_USE_TIM3
-#define STM32_PWM_USE_TIM3 FALSE
-
 #undef STM32_SPI_USE_SPI1
 #define STM32_SPI_USE_SPI1 TRUE
 
-#undef STM32_SPI_USE_SPI2
-#define STM32_SPI_USE_SPI2 FALSE
-
+#undef STM32_I2C_USE_I2C1
+#define STM32_I2C_USE_I2C1 TRUE
\ No newline at end of file
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c b/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c
index b20f897720..d9ea7993cf 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c
+++ b/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c
@@ -94,8 +94,8 @@ led_config_t g_led_config = {
         { 1,           2,         3,          4,           5,           6,         7,          8,          9,          10,        11,           12,           13,          14,         15},
         {17,          18,        19,         20,          21,          22,        23,         24,         25,          26,        27,           28,           29,          30,      NO_LED},
         {32,          33,        34,         35,          36,          37,        38,         39,         40,          41,        42,           43,       NO_LED,          44,      NO_LED},
-        {45,        NO_LED,      46,         47,          48,          49,        50,         51,         52,          53,        54,           55,           56,          57,          58},
-        {59,        NO_LED,      60,     NO_LED,          61,      NO_LED,        62,     NO_LED,         63,      NO_LED,        64,       NO_LED,       NO_LED,      NO_LED,          65},
+        {45,           0,        46,         47,          48,          49,        50,         51,         52,          53,        54,           55,           56,          57,          58},
+        {59,          16,        60,         31,          61,      NO_LED,        62,     NO_LED,         63,      NO_LED,        64,       NO_LED,       NO_LED,      NO_LED,          65},
     }, {
         //LED Index to Physical Positon
         {0,0},      { 17,  0},  { 34, 0 },  { 51, 0 },  { 69, 0},   { 86, 0},   {100, 0},   {103, 0},   { 120, 0},  { 138, 0},  { 155, 0},  { 172, 0},  { 189, 0},    {207,  0},   {215,  0},   {224, 0},
@@ -120,47 +120,3 @@ __attribute__((weak)) void rgb_matrix_indicators_user(void) {
 
 
 #endif
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  if (record->event.pressed) {
-    switch(keycode) {
-    #ifdef RGBLIGHT_ENABLE
-        #ifdef RGB_MATRIX_ENABLE
-        case KC_F13: // toggle rgb matrix
-            rgb_matrix_toggle();
-            return false;
-        case KC_F14:
-            rgb_matrix_step();
-            return false;
-        case KC_F15:
-            rgb_matrix_increase_speed();
-            return false;
-        case KC_F16:
-            rgb_matrix_decrease_speed();
-            return false;
-        case KC_F17:
-            rgb_matrix_increase_hue();
-            return false;
-        case KC_F18:
-            rgb_matrix_decrease_hue();
-            return false;
-        case KC_F19:
-            rgb_matrix_increase_sat();
-            return false;
-        case KC_F20:
-            rgb_matrix_decrease_sat();
-            return false;
-        case KC_F21:
-            rgb_matrix_increase_val();
-            return false;
-        case KC_F22:
-            rgb_matrix_decrease_val();
-            return false;
-        #endif
-    #endif
-        default:
-        break;
-    }
-  }
-  return true;
-}
\ No newline at end of file
diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk b/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk
index 904d20877b..3407a7b780 100644
--- a/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk
+++ b/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk
@@ -1,5 +1,19 @@
+# MCU name
+MCU = STM32F103
+
+# Bootloader selection
+BOOTLOADER = stm32duino
+
+# Build Options
+#   change yes to no to disable
+#
 RGB_MATRIX_ENABLE = yes
 RGB_MATRIX_DRIVER = IS31FL3741
 RGBLIGHT_ENABLE = yes
 ENCODER_ENABLE = yes
 WS2812_DRIVER = spi
+CONSOLE_ENABLE = no        # Console for debug
+COMMAND_ENABLE = no        # Commands for debug and configuration
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
\ No newline at end of file