Remove non-Keychron keyboards

26 files changed, 0 insertions, 1253 deletions

diff --git a/keyboards/matrix/m12og/readme.md b/keyboards/matrix/m12og/readme.md
deleted file mode 100644
index c0562cec67..0000000000
--- a/keyboards/matrix/m12og/readme.md
+++ /dev/null
@@ -1,12 +0,0 @@
-# Matrix 8XV1.2 OG keyboard
-
-![Matrix 8XV1.2 OG](https://i.imgur.com/NELL6Sbl.jpg)
-
-This was the Matrix 8XV1.2 OG keyboard made by the Matrix team.  
-
-There are two versions of the PCB available.
-
-|Version|Features                                             |
-|-------|-----------------------------------------------------|
-|rev1   |Green/Yellow PCB / ARM STM32 controller / ANSI only  |
-|rev2   |White PCB / Atmel AVR controller / ANSI/ISO          |
diff --git a/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.c b/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.c
deleted file mode 100644
index b1fc61c557..0000000000
--- a/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include <hal.h>
-
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
-  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
-  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
-  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
-  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
-  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-  stm32_clock_init();
-  
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
-}
diff --git a/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.h b/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.h
deleted file mode 100644
index 685deb4160..0000000000
--- a/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Board identifier.
- */
-#define BOARD_M12OG
-#define BOARD_NAME              "Matrix 12og keyboard"
-
-/*
- * Board frequencies.
- */
-#define STM32_LSECLK            32768
-#define STM32_HSECLK            8000000
-
-/*
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
- *
- * Only xB (128KB Flash) is defined, but it's identical to the
- * x8 version (64KB Flash) except for the Flash region size in the
- * linker script. For x8 parts use xB here and change to the x8 linker
- * script in the project Makefile.
- */
-#define STM32F103xB
-
-/*
- * IO pins assignments
- *
- * numbering is sorted by onboard/connectors, as from the schematics in
- * http://www.vcc-gnd.com/read.php?tid=369
- */
-
-/* on-board */
-#define GPIOA_USBDM             11      // pin 8
-#define GPIOA_USBDP             12      // pin 9
-
-#define GPIOC_OSC32_IN          14
-#define GPIOC_OSC32_OUT         15
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- *
- * The digits have the following meaning:
- *   0 - Analog input.
- *   1 - Push Pull output 10MHz.
- *   2 - Push Pull output 2MHz.
- *   3 - Push Pull output 50MHz.
- *   4 - Digital input.
- *   5 - Open Drain output 10MHz.
- *   6 - Open Drain output 2MHz.
- *   7 - Open Drain output 50MHz.
- *   8 - Digital input with PullUp or PullDown resistor depending on ODR.
- *   9 - Alternate Push Pull output 10MHz.
- *   A - Alternate Push Pull output 2MHz.
- *   B - Alternate Push Pull output 50MHz.
- *   C - Reserved.
- *   D - Alternate Open Drain output 10MHz.
- *   E - Alternate Open Drain output 2MHz.
- *   F - Alternate Open Drain output 50MHz.
- * Please refer to the STM32 Reference Manual for details.
- */
-
-/*
- * Port A setup.
- * Everything input with pull-up except:
- */
-#define VAL_GPIOACRL            0x88888888      /*  PA7...PA0 */
-#define VAL_GPIOACRH            0x88888888      /* PA15...PA8 */
-#define VAL_GPIOAODR            0xFFFFFFFF
-
-/*
- * Port B setup.
- * Everything input with pull-up except:
- */
-#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */
-#define VAL_GPIOBCRH            0x88888888      /* PB15...PB8 */
-#define VAL_GPIOBODR            0xFFFFFFFF
-
-/*
- * Port C setup.
- * Everything input with pull-up except:
- */
-#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */
-#define VAL_GPIOCCRH            0x88888888      /* PC15...PC8 */
-#define VAL_GPIOCODR            0xFFFFFFFF
-
-/*
- * Port D setup.
- * Everything input with pull-up except:
- * PD0  - Normal input (XTAL).
- * PD1  - Normal input (XTAL).
- */
-#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */
-#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */
-#define VAL_GPIODODR            0xFFFFFFFF
-
-/*
- * Port E setup.
- * Everything input with pull-up except:
- */
-#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */
-#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */
-#define VAL_GPIOEODR            0xFFFFFFFF
-
-/*
- * USB bus activation macro, required by the USB driver.
- */
-#define usb_lld_connect_bus(usbp)	/* always connected */
-
-/*
- * USB bus de-activation macro, required by the USB driver.
- */
-#define usb_lld_disconnect_bus(usbp)	/* always connected */
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
-  void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
diff --git a/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.mk b/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.mk
deleted file mode 100644
index 48f620db1c..0000000000
--- a/keyboards/matrix/m12og/rev1/boards/m12og_v1/board.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/m12og_v1/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/m12og_v1
diff --git a/keyboards/matrix/m12og/rev1/chconf.h b/keyboards/matrix/m12og/rev1/chconf.h
deleted file mode 100644
index 5109645a37..0000000000
--- a/keyboards/matrix/m12og/rev1/chconf.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* Copyright 2020 QMK
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/*
- * This file was auto-generated by:
- *    `qmk chibios-confmigrate -i keyboards/matrix/m12og/rev1/chconf.h -r platforms/chibios/common/configs/chconf.h`
- */
-
-#pragma once
-
-#define CH_CFG_ST_TIMEDELTA 0
-
-#define CH_CFG_USE_REGISTRY TRUE
-
-#define CH_CFG_USE_WAITEXIT TRUE
-
-#define CH_CFG_USE_CONDVARS TRUE
-
-#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
-
-#define CH_CFG_USE_MESSAGES TRUE
-
-#define CH_CFG_USE_MAILBOXES TRUE
-
-#define CH_CFG_USE_HEAP TRUE
-
-#include_next <chconf.h>
diff --git a/keyboards/matrix/m12og/rev1/config.h b/keyboards/matrix/m12og/rev1/config.h
deleted file mode 100644
index b83c0eece2..0000000000
--- a/keyboards/matrix/m12og/rev1/config.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
-Copyright 2021 kb-elmo<mail@elmo.space>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 16
-
-/* Keyboard Matrix Assignments */
-
-#define MATRIX_ROW_PINS { A0, A1, A2, A3, A4, A5 }
-#define MATRIX_COL_PINS { C0, C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Status LEDs */
-#define LED_CAPS_LOCK_PIN B6
-#define LED_SCROLL_LOCK_PIN B5
-
-/* RGB */
-#define RGB_DI_PIN B8
-#define RGBLIGHT_ANIMATIONS
-
-#define RGBLED_NUM 16
-#define RGBLIGHT_SLEEP
-#define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_RGB
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
diff --git a/keyboards/matrix/m12og/rev1/halconf.h b/keyboards/matrix/m12og/rev1/halconf.h
deleted file mode 100644
index 20ce9bc3c0..0000000000
--- a/keyboards/matrix/m12og/rev1/halconf.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* Copyright 2020 QMK
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/*
- * This file was auto-generated by:
- *    `qmk chibios-confmigrate -i keyboards/matrix/m12og/rev1/halconf.h -r platforms/chibios/common/configs/halconf.h`
- */
-
-#pragma once
-
-#define HAL_USE_PWM TRUE
-
-#include_next <halconf.h>
diff --git a/keyboards/matrix/m12og/rev1/info.json b/keyboards/matrix/m12og/rev1/info.json
deleted file mode 100644
index 3406beab76..0000000000
--- a/keyboards/matrix/m12og/rev1/info.json
+++ /dev/null
@@ -1,103 +0,0 @@
-{
-    "keyboard_name": "m12og_v1",
-    "manufacturer": "Matrix",
-    "url": "",
-    "maintainer": "kb-elmo",
-    "usb": {
-        "vid": "0x4D58",
-        "pid": "0x0369",
-        "device_version": "0.0.1"
-    },
-    "layouts": {
-        "LAYOUT_all": {
-            "layout": [
-                {"label":"Esc", "x":0, "y":0},
-                {"label":"F1", "x":2, "y":0},
-                {"label":"F2", "x":3, "y":0},
-                {"label":"F3", "x":4, "y":0},
-                {"label":"F4", "x":5, "y":0},
-                {"label":"F5", "x":6.5, "y":0},
-                {"label":"F6", "x":7.5, "y":0},
-                {"label":"F7", "x":8.5, "y":0},
-                {"label":"F8", "x":9.5, "y":0},
-                {"label":"F9", "x":11, "y":0},
-                {"label":"F10", "x":12, "y":0},
-                {"label":"F11", "x":13, "y":0},
-                {"label":"F12", "x":14, "y":0},
-                {"label":"PrtSc", "x":15.25, "y":0},
-                {"label":"Scroll Lock", "x":16.25, "y":0},
-                {"label":"Pause", "x":17.25, "y":0},
-                {"label":"~", "x":0, "y":1.5},
-                {"label":"!", "x":1, "y":1.5},
-                {"label":"@", "x":2, "y":1.5},
-                {"label":"#", "x":3, "y":1.5},
-                {"label":"$", "x":4, "y":1.5},
-                {"label":"%", "x":5, "y":1.5},
-                {"label":"^", "x":6, "y":1.5},
-                {"label":"&", "x":7, "y":1.5},
-                {"label":"*", "x":8, "y":1.5},
-                {"label":"(", "x":9, "y":1.5},
-                {"label":")", "x":10, "y":1.5},
-                {"label":"_", "x":11, "y":1.5},
-                {"label":"+", "x":12, "y":1.5},
-                {"label":"Backspace", "x":13, "y":1.5, "w":2},
-                {"label":"Insert", "x":15.25, "y":1.5},
-                {"label":"Home", "x":16.25, "y":1.5},
-                {"label":"PgUp", "x":17.25, "y":1.5},
-                {"label":"Tab", "x":0, "y":2.5, "w":1.5},
-                {"label":"Q", "x":1.5, "y":2.5},
-                {"label":"W", "x":2.5, "y":2.5},
-                {"label":"E", "x":3.5, "y":2.5},
-                {"label":"R", "x":4.5, "y":2.5},
-                {"label":"T", "x":5.5, "y":2.5},
-                {"label":"Y", "x":6.5, "y":2.5},
-                {"label":"U", "x":7.5, "y":2.5},
-                {"label":"I", "x":8.5, "y":2.5},
-                {"label":"O", "x":9.5, "y":2.5},
-                {"label":"P", "x":10.5, "y":2.5},
-                {"label":"{", "x":11.5, "y":2.5},
-                {"label":"}", "x":12.5, "y":2.5},
-                {"label":"|", "x":13.5, "y":2.5, "w":1.5},
-                {"label":"Delete", "x":15.25, "y":2.5},
-                {"label":"End", "x":16.25, "y":2.5},
-                {"label":"PgDn", "x":17.25, "y":2.5},
-                {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
-                {"label":"A", "x":1.75, "y":3.5},
-                {"label":"S", "x":2.75, "y":3.5},
-                {"label":"D", "x":3.75, "y":3.5},
-                {"label":"F", "x":4.75, "y":3.5},
-                {"label":"G", "x":5.75, "y":3.5},
-                {"label":"H", "x":6.75, "y":3.5},
-                {"label":"J", "x":7.75, "y":3.5},
-                {"label":"K", "x":8.75, "y":3.5},
-                {"label":"L", "x":9.75, "y":3.5},
-                {"label":":", "x":10.75, "y":3.5},
-                {"label":"\"", "x":11.75, "y":3.5},
-                {"label":"Enter", "x":12.75, "y":3.5, "w":2.25},
-                {"label":"Shift", "x":0, "y":4.5, "w":2.25},
-                {"label":"Z", "x":2.25, "y":4.5},
-                {"label":"X", "x":3.25, "y":4.5},
-                {"label":"C", "x":4.25, "y":4.5},
-                {"label":"V", "x":5.25, "y":4.5},
-                {"label":"B", "x":6.25, "y":4.5},
-                {"label":"N", "x":7.25, "y":4.5},
-                {"label":"M", "x":8.25, "y":4.5},
-                {"label":"<", "x":9.25, "y":4.5},
-                {"label":">", "x":10.25, "y":4.5},
-                {"label":"?", "x":11.25, "y":4.5},
-                {"label":"Shift", "x":12.25, "y":4.5, "w":2.75},
-                {"label":"\u2191", "x":16.25, "y":4.5},
-                {"label":"Ctrl", "x":0, "y":5.5, "w":1.5},
-                {"label":"Win", "x":1.5, "y":5.5},
-                {"label":"Alt", "x":2.5, "y":5.5, "w":1.5},
-                {"x":4, "y":5.5, "w":7},
-                {"label":"Win", "x":11, "y":5.5, "w":1.5},
-                {"label":"Menu", "x":12.5, "y":5.5},
-                {"label":"Ctrl", "x":13.5, "y":5.5, "w":1.5},
-                {"label":"\u2190", "x":15.25, "y":5.5},
-                {"label":"\u2193", "x":16.25, "y":5.5},
-                {"label":"\u2192", "x":17.25, "y":5.5}
-            ]
-        }
-    }
-}
diff --git a/keyboards/matrix/m12og/rev1/keymaps/default/keymap.c b/keyboards/matrix/m12og/rev1/keymaps/default/keymap.c
deleted file mode 100644
index 355827c9c6..0000000000
--- a/keyboards/matrix/m12og/rev1/keymaps/default/keymap.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/* Copyright 2021 kb-elmo<mail@elmo.space>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = LAYOUT_all(
-    KC_ESC,       KC_F1,   KC_F2,   KC_F3,   KC_F4,     KC_F5,   KC_F6,   KC_F7,   KC_F8,     KC_F9,   KC_F10,  KC_F11,  KC_F12,      KC_PSCR, KC_SLCK, KC_PAUS,
-    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,     KC_INS,  KC_HOME, KC_PGUP,
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,     KC_DEL,  KC_END,  KC_PGDN,
-    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,      KC_ENT,
-    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,                       KC_UP,
-    KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                                               KC_RALT, MO(1),   KC_LCTL,     KC_LEFT, KC_DOWN, KC_RGHT
-  ),
-  [1] = LAYOUT_all(
-    KC_TRNS,     RGB_TOG, RGB_MOD, RGB_RMOD, KC_TRNS,   RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD,   RGB_SAI, RGB_SAD, RGB_SPI, RGB_SPD,     KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,     KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, QK_BOOT,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,     KC_TRNS, KC_TRNS, KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,      KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPRV, KC_MNXT, KC_MPLY,          KC_TRNS,                       KC_TRNS,
-    KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS,     KC_TRNS, KC_TRNS, KC_TRNS
-  )
-};
-
-bool led_update_user(led_t led_state) {
-    static uint8_t caps_state = 0;
-    if (caps_state != led_state.caps_lock) {
-        if (led_state.caps_lock) {
-            rgblight_sethsv_noeeprom_cyan();
-            rgblight_mode_noeeprom(1);
-        } else {
-            rgblight_sethsv_noeeprom(5, 255, 255);
-            rgblight_mode_noeeprom(37);
-        }
-        caps_state = led_state.caps_lock;
-    }
-    return true;
-};
diff --git a/keyboards/matrix/m12og/rev1/ld/m12og_v1.ld b/keyboards/matrix/m12og/rev1/ld/m12og_v1.ld
deleted file mode 100644
index ad04d6d170..0000000000
--- a/keyboards/matrix/m12og/rev1/ld/m12og_v1.ld
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * STM32F103xB memory setup for use with the matrix 12og mass-storage device bootloader.
- */
-MEMORY
-{
-    flash0  : org = 0x08018000, len = 128k - 0x18000
-    flash1  : org = 0x00000000, len = 0
-    flash2  : org = 0x00000000, len = 0
-    flash3  : org = 0x00000000, len = 0
-    flash4  : org = 0x00000000, len = 0
-    flash5  : org = 0x00000000, len = 0
-    flash6  : org = 0x00000000, len = 0
-    flash7  : org = 0x00000000, len = 0
-    ram0    : org = 0x20000000, len = 20k
-    ram1    : org = 0x00000000, len = 0
-    ram2    : org = 0x00000000, len = 0
-    ram3    : org = 0x00000000, len = 0
-    ram4    : org = 0x00000000, len = 0
-    ram5    : org = 0x00000000, len = 0
-    ram6    : org = 0x00000000, len = 0
-    ram7    : org = 0x00000000, len = 0
-}
-
-/* For each data/text section two region are defined, a virtual region
-   and a load region (_LMA suffix).*/
-
-/* Flash region to be used for exception vectors.*/
-REGION_ALIAS("VECTORS_FLASH", flash0);
-REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
-
-/* Flash region to be used for constructors and destructors.*/
-REGION_ALIAS("XTORS_FLASH", flash0);
-REGION_ALIAS("XTORS_FLASH_LMA", flash0);
-
-/* Flash region to be used for code text.*/
-REGION_ALIAS("TEXT_FLASH", flash0);
-REGION_ALIAS("TEXT_FLASH_LMA", flash0);
-
-/* Flash region to be used for read only data.*/
-REGION_ALIAS("RODATA_FLASH", flash0);
-REGION_ALIAS("RODATA_FLASH_LMA", flash0);
-
-/* Flash region to be used for various.*/
-REGION_ALIAS("VARIOUS_FLASH", flash0);
-REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
-
-/* Flash region to be used for RAM(n) initialization data.*/
-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
-
-/* RAM region to be used for Main stack. This stack accommodates the processing
-   of all exceptions and interrupts.*/
-REGION_ALIAS("MAIN_STACK_RAM", ram0);
-
-/* RAM region to be used for the process stack. This is the stack used by
-   the main() function.*/
-REGION_ALIAS("PROCESS_STACK_RAM", ram0);
-
-/* RAM region to be used for data segment.*/
-REGION_ALIAS("DATA_RAM", ram0);
-REGION_ALIAS("DATA_RAM_LMA", flash0);
-
-/* RAM region to be used for BSS segment.*/
-REGION_ALIAS("BSS_RAM", ram0);
-
-/* RAM region to be used for the default heap.*/
-REGION_ALIAS("HEAP_RAM", ram0);
-
-/* Generic rules inclusion.*/
-INCLUDE rules.ld
diff --git a/keyboards/matrix/m12og/rev1/matrix.c b/keyboards/matrix/m12og/rev1/matrix.c
deleted file mode 100644
index 9c36153da1..0000000000
--- a/keyboards/matrix/m12og/rev1/matrix.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* Copyright 2021 xyzz
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <stdint.h>
-#include <stdbool.h>
-#include "util.h"
-#include "matrix.h"
-#include "debounce.h"
-#include "quantum.h"
-
-static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
-static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
-
-static void select_col(uint8_t col) {
-    setPinOutput(col_pins[col]);
-    writePinHigh(col_pins[col]);
-}
-
-static void unselect_col(uint8_t col) { setPinInputLow(col_pins[col]); }
-
-static void unselect_cols(void) {
-    for (uint8_t x = 0; x < MATRIX_COLS; x++) {
-        setPinInputLow(col_pins[x]);
-    }
-}
-
-static void init_pins(void) {
-    unselect_cols();
-    for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
-        setPinInputLow(row_pins[x]);
-    }
-}
-
-static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) {
-    bool matrix_changed = false;
-
-    // Select col and wait for col selecton to stabilize
-    select_col(current_col);
-    matrix_io_delay();
-
-    // For each row...
-    for (uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) {
-        // Store last value of row prior to reading
-        matrix_row_t last_row_value    = current_matrix[row_index];
-        matrix_row_t current_row_value = last_row_value;
-
-        // Check row pin state
-        if (readPin(row_pins[row_index]) != 0) {
-            // Pin LO, set col bit
-            current_row_value |= (MATRIX_ROW_SHIFTER << current_col);
-        } else {
-            // Pin HI, clear col bit
-            current_row_value &= ~(MATRIX_ROW_SHIFTER << current_col);
-        }
-
-        // Determine if the matrix changed state
-        if ((last_row_value != current_row_value)) {
-            matrix_changed |= true;
-            current_matrix[row_index] = current_row_value;
-        }
-    }
-
-    // Unselect col
-    unselect_col(current_col);
-
-    return matrix_changed;
-}
-
-void matrix_init_custom(void) {
-    // initialize key pins
-    init_pins();
-}
-
-uint8_t matrix_scan_custom(matrix_row_t current_matrix[]) {
-    bool changed = false;
-
-    // Set col, read rows
-    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
-        changed |= read_rows_on_col(current_matrix, current_col);
-    }
-
-    return (uint8_t)changed;
-}
diff --git a/keyboards/matrix/m12og/rev1/mcuconf.h b/keyboards/matrix/m12og/rev1/mcuconf.h
deleted file mode 100644
index a645d3c5d5..0000000000
--- a/keyboards/matrix/m12og/rev1/mcuconf.h
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
-
-#define STM32F103_MCUCONF
-
-/*
- * STM32F103 drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0       Lowest...Highest.
- *
- * DMA priorities:
- * 0...3        Lowest...Highest.
- */
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT                       FALSE
-#define STM32_HSI_ENABLED                   TRUE
-#define STM32_LSI_ENABLED                   FALSE
-#define STM32_HSE_ENABLED                   TRUE
-#define STM32_LSE_ENABLED                   FALSE
-#define STM32_SW                            STM32_SW_PLL
-#define STM32_PLLSRC                        STM32_PLLSRC_HSE
-#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
-#define STM32_PLLMUL_VALUE                  9
-#define STM32_HPRE                          STM32_HPRE_DIV1
-#define STM32_PPRE1                         STM32_PPRE1_DIV2
-#define STM32_PPRE2                         STM32_PPRE2_DIV2
-#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
-#define STM32_USB_CLOCK_REQUIRED            TRUE
-#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
-#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
-#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
-#define STM32_PVD_ENABLE                    FALSE
-#define STM32_PLS                           STM32_PLS_LEV0
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_USE_ADC1                  FALSE
-#define STM32_ADC_ADC1_DMA_PRIORITY         2
-#define STM32_ADC_ADC1_IRQ_PRIORITY         6
-
-/*
- * CAN driver system settings.
- */
-#define STM32_CAN_USE_CAN1                  FALSE
-#define STM32_CAN_CAN1_IRQ_